| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * From Coreboot |
| * Copyright (C) 2008-2009 coresystems GmbH |
| */ |
| |
| #include <common.h> |
| #include <ahci.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/pch_common.h> |
| #include <asm/pci.h> |
| #include <asm/arch/pch.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void common_sata_init(struct udevice *dev, unsigned int port_map) |
| { |
| u32 reg32; |
| u16 reg16; |
| |
| /* Set IDE I/O Configuration */ |
| reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; |
| dm_pci_write_config32(dev, IDE_CONFIG, reg32); |
| |
| /* Port enable */ |
| dm_pci_read_config16(dev, 0x92, ®16); |
| reg16 &= ~0x3f; |
| reg16 |= port_map; |
| dm_pci_write_config16(dev, 0x92, reg16); |
| |
| /* SATA Initialization register */ |
| port_map &= 0xff; |
| dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183); |
| } |
| |
| static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch) |
| { |
| unsigned int port_map, speed_support, port_tx; |
| const void *blob = gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| const char *mode; |
| u32 reg32; |
| u16 reg16; |
| |
| debug("SATA: Initializing...\n"); |
| |
| /* SATA configuration */ |
| port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); |
| speed_support = fdtdec_get_int(blob, node, |
| "sata_interface_speed_support", 0); |
| |
| mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); |
| if (!mode || !strcmp(mode, "ahci")) { |
| ulong abar; |
| |
| debug("SATA: Controller in AHCI mode\n"); |
| |
| /* Set timings */ |
| dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | |
| IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | |
| IDE_PPE0 | IDE_IE0 | IDE_TIME0); |
| dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | |
| IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); |
| |
| /* Sync DMA */ |
| dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); |
| dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); |
| |
| common_sata_init(dev, 0x8000 | port_map); |
| |
| /* Initialize AHCI memory-mapped space */ |
| abar = dm_pci_read_bar32(dev, 5); |
| debug("ABAR: %08lx\n", abar); |
| /* CAP (HBA Capabilities) : enable power management */ |
| reg32 = readl(abar + 0x00); |
| reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */ |
| reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ |
| /* Set ISS, if available */ |
| if (speed_support) { |
| reg32 &= ~0x00f00000; |
| reg32 |= (speed_support & 0x03) << 20; |
| } |
| writel(reg32, abar + 0x00); |
| /* PI (Ports implemented) */ |
| writel(port_map, abar + 0x0c); |
| (void) readl(abar + 0x0c); /* Read back 1 */ |
| (void) readl(abar + 0x0c); /* Read back 2 */ |
| /* CAP2 (HBA Capabilities Extended)*/ |
| reg32 = readl(abar + 0x24); |
| reg32 &= ~0x00000002; |
| writel(reg32, abar + 0x24); |
| /* VSP (Vendor Specific Register */ |
| reg32 = readl(abar + 0xa0); |
| reg32 &= ~0x00000005; |
| writel(reg32, abar + 0xa0); |
| } else if (!strcmp(mode, "combined")) { |
| debug("SATA: Controller in combined mode\n"); |
| |
| /* No AHCI: clear AHCI base */ |
| dm_pci_write_bar32(dev, 5, 0x00000000); |
| /* And without AHCI BAR no memory decoding */ |
| dm_pci_read_config16(dev, PCI_COMMAND, ®16); |
| reg16 &= ~PCI_COMMAND_MEMORY; |
| dm_pci_write_config16(dev, PCI_COMMAND, reg16); |
| |
| dm_pci_write_config8(dev, 0x09, 0x80); |
| |
| /* Set timings */ |
| dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | |
| IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); |
| dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | |
| IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | |
| IDE_PPE0 | IDE_IE0 | IDE_TIME0); |
| |
| /* Sync DMA */ |
| dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0); |
| dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200); |
| |
| common_sata_init(dev, port_map); |
| } else { |
| debug("SATA: Controller in plain-ide mode\n"); |
| |
| /* No AHCI: clear AHCI base */ |
| dm_pci_write_bar32(dev, 5, 0x00000000); |
| |
| /* And without AHCI BAR no memory decoding */ |
| dm_pci_read_config16(dev, PCI_COMMAND, ®16); |
| reg16 &= ~PCI_COMMAND_MEMORY; |
| dm_pci_write_config16(dev, PCI_COMMAND, reg16); |
| |
| /* |
| * Native mode capable on both primary and secondary (0xa) |
| * OR'ed with enabled (0x50) = 0xf |
| */ |
| dm_pci_write_config8(dev, 0x09, 0x8f); |
| |
| /* Set timings */ |
| dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | |
| IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | |
| IDE_PPE0 | IDE_IE0 | IDE_TIME0); |
| dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | |
| IDE_SITRE | IDE_ISP_3_CLOCKS | |
| IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0); |
| |
| /* Sync DMA */ |
| dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0); |
| dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201); |
| |
| common_sata_init(dev, port_map); |
| } |
| |
| /* Set Gen3 Transmitter settings if needed */ |
| port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0); |
| if (port_tx) |
| pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx); |
| |
| port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0); |
| if (port_tx) |
| pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx); |
| |
| /* Additional Programming Requirements */ |
| pch_common_sir_write(dev, 0x04, 0x00001600); |
| pch_common_sir_write(dev, 0x28, 0xa0000033); |
| reg32 = pch_common_sir_read(dev, 0x54); |
| reg32 &= 0xff000000; |
| reg32 |= 0x5555aa; |
| pch_common_sir_write(dev, 0x54, reg32); |
| pch_common_sir_write(dev, 0x64, 0xcccc8484); |
| reg32 = pch_common_sir_read(dev, 0x68); |
| reg32 &= 0xffff0000; |
| reg32 |= 0xcccc; |
| pch_common_sir_write(dev, 0x68, reg32); |
| reg32 = pch_common_sir_read(dev, 0x78); |
| reg32 &= 0x0000ffff; |
| reg32 |= 0x88880000; |
| pch_common_sir_write(dev, 0x78, reg32); |
| pch_common_sir_write(dev, 0x84, 0x001c7000); |
| pch_common_sir_write(dev, 0x88, 0x88338822); |
| pch_common_sir_write(dev, 0xa0, 0x001c7000); |
| pch_common_sir_write(dev, 0xc4, 0x0c0c0c0c); |
| pch_common_sir_write(dev, 0xc8, 0x0c0c0c0c); |
| pch_common_sir_write(dev, 0xd4, 0x10000000); |
| |
| pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000); |
| pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100); |
| } |
| |
| static void bd82x6x_sata_enable(struct udevice *dev) |
| { |
| const void *blob = gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| unsigned port_map; |
| const char *mode; |
| u16 map = 0; |
| |
| /* |
| * Set SATA controller mode early so the resource allocator can |
| * properly assign IO/Memory resources for the controller. |
| */ |
| mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); |
| if (mode && !strcmp(mode, "ahci")) |
| map = 0x0060; |
| port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); |
| |
| map |= (port_map ^ 0x3f) << 8; |
| dm_pci_write_config16(dev, 0x90, map); |
| } |
| |
| static int bd82x6x_sata_bind(struct udevice *dev) |
| { |
| struct udevice *scsi_dev; |
| int ret; |
| |
| if (gd->flags & GD_FLG_RELOC) { |
| ret = ahci_bind_scsi(dev, &scsi_dev); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int bd82x6x_sata_probe(struct udevice *dev) |
| { |
| struct udevice *pch; |
| int ret; |
| |
| ret = uclass_first_device_err(UCLASS_PCH, &pch); |
| if (ret) |
| return ret; |
| |
| if (!(gd->flags & GD_FLG_RELOC)) |
| bd82x6x_sata_enable(dev); |
| else { |
| bd82x6x_sata_init(dev, pch); |
| ret = ahci_probe_scsi_pci(dev); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id bd82x6x_ahci_ids[] = { |
| { .compatible = "intel,pantherpoint-ahci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(ahci_ivybridge_drv) = { |
| .name = "ahci_ivybridge", |
| .id = UCLASS_AHCI, |
| .of_match = bd82x6x_ahci_ids, |
| .bind = bd82x6x_sata_bind, |
| .probe = bd82x6x_sata_probe, |
| }; |