sh: Update Renesas R7780MP board
New NOR Flash board support and remove network setting from config file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 4e89580..4c82c5a 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -1,7 +1,7 @@
/*
* Configuation settings for the Renesas R7780MP board
*
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
*
* See file CREDITS for list of people who contributed to this
@@ -31,7 +31,8 @@
#define CONFIG_SH4A 1
#define CONFIG_CPU_SH7780 1
#define CONFIG_R7780MP 1
-#define __LITTLE_ENDIAN 1
+#define CFG_R7780MP_OLD_FLASH 1
+#define __LITTLE_ENDIAN__ 1
/*
* Command line configuration.
@@ -59,12 +60,6 @@
/* check for keypress on bootdelay==0 */
/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
-/* Network setting */
-#define CONFIG_NETMASK 255.0.0.0
-#define CONFIG_IPADDR 10.0.192.82
-#define CONFIG_SERVERIP 10.0.0.1
-#define CONFIG_GATEWAYIP 10.0.0.1
-
#define CFG_SDRAM_BASE (0x08000000)
#define CFG_SDRAM_SIZE (128 * 1024 * 1024)
@@ -80,22 +75,30 @@
#define CFG_MEMTEST_START (CFG_SDRAM_BASE)
#define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
-/* NOR Flash (S29PL127J60TFI130) */
+/* Flash board support */
#define CFG_FLASH_BASE (0xA0000000)
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CFG_MAX_FLASH_BANKS (2)
-#define CFG_MAX_FLASH_SECT 270
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
+#ifdef CFG_R7780MP_OLD_FLASH
+/* NOR Flash (S29PL127J60TFI130) */
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+# define CFG_MAX_FLASH_BANKS (2)
+# define CFG_MAX_FLASH_SECT 270
+# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
CFG_FLASH_BASE + 0x100000,\
CFG_FLASH_BASE + 0x400000,\
CFG_FLASH_BASE + 0x700000, }
+#else /* CFG_R7780MP_OLD_FLASH */
+/* NOR Flash (Spantion S29GL256P) */
+# define CFG_MAX_FLASH_BANKS (1)
+# define CFG_MAX_FLASH_SECT 256
+# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#endif /* CFG_R7780MP_OLD_FLASH */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CFG_MONITOR_BASE (CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN (112 * 1024)
+#define CFG_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN (256 * 1024)
+#define CFG_MALLOC_LEN (1204 * 1024)
/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_SIZE (256)
@@ -110,7 +113,7 @@
#define CFG_FLASH_EMPTY_INFO
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE (16 * 1024)
+#define CFG_ENV_SECT_SIZE (256 * 1024)
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_FLASH_ERASE_TOUT 120000
@@ -141,8 +144,10 @@
#endif /* CONFIG_CMD_PCI */
#if defined(CONFIG_CMD_NET)
-/* #define CONFIG_NET_MULTI
- #define CONFIG_RTL8169 */
+/*
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8169
+*/
/* AX88696L Support(NE2000 base chip) */
#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_AX88796L