phy: rockchip-inno-usb2: Add USB2 PHY for rk3568
RK3568 has two USB 2.0 PHYs, and each PHY has two ports, the OTG port
of PHY0 support OTG mode with charging detection function, they are
similar to previous Rockchip SoCs.
However, there are three different designs for RK3568 USB 2.0 PHY.
1. RK3568 uses independent USB GRF module for each USB 2.0 PHY.
2. RK3568 accesses the registers of USB 2.0 PHY IP directly by APB.
3. The two ports of USB 2.0 PHY share one interrupt.
This patch only PHY1 with necessary attributes required to function
USBPHY1 on U-Boot.
Co-developed-by: Ren Jianing <jianing.ren@rock-chips.com>
Signed-off-by: Ren Jianing <jianing.ren@rock-chips.com>
Co-developed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index a01148d..55e1dbc 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -298,11 +298,65 @@
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x052, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct udevice_id rockchip_usb2phy_ids[] = {
{
.compatible = "rockchip,rk3399-usb2phy",
.data = (ulong)&rk3399_usb2phy_cfgs,
},
+ {
+ .compatible = "rockchip,rk3568-usb2phy",
+ .data = (ulong)&rk3568_phy_cfgs,
+ },
{ /* sentinel */ }
};