/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * relocate - common relocation function for AArch64 U-Boot
 *
 * (C) Copyright 2013
 * Albert ARIBAUD <albert.u.boot@aribaud.net>
 * David Feng <fenghua@phytium.com.cn>
 */

#include <asm-offsets.h>
#include <config.h>
#include <elf.h>
#include <linux/linkage.h>
#include <asm/macro.h>

/*
 * void relocate_code(addr_moni)
 *
 * This function relocates the monitor code.
 * x0 holds the destination address.
 */
ENTRY(relocate_code)
	stp	x29, x30, [sp, #-32]!	/* create a stack frame */
	mov	x29, sp
	str	x0, [sp, #16]
	/*
	 * Copy u-boot from flash to RAM
	 */
	adrp	x1, __image_copy_start		/* x1 <- address bits [31:12] */
	add	x1, x1, :lo12:__image_copy_start/* x1 <- address bits [11:00] */
	subs	x9, x0, x1			/* x9 <- Run to copy offset */
	b.eq	relocate_done			/* skip relocation */
	/*
	 * Don't ldr x1, __image_copy_start here, since if the code is already
	 * running at an address other than it was linked to, that instruction
	 * will load the relocated value of __image_copy_start. To
	 * correctly apply relocations, we need to know the linked value.
	 *
	 * Linked &__image_copy_start, which we know was at
	 * CONFIG_TEXT_BASE, which is stored in _TEXT_BASE, as a non-
	 * relocated value, since it isn't a symbol reference.
	 */
	ldr	x1, _TEXT_BASE		/* x1 <- Linked &__image_copy_start */
	subs	x9, x0, x1		/* x9 <- Link to copy offset */

	adrp	x1, __image_copy_start		/* x1 <- address bits [31:12] */
	add	x1, x1, :lo12:__image_copy_start/* x1 <- address bits [11:00] */
	adrp	x2, __image_copy_end		/* x2 <- address bits [31:12] */
	add	x2, x2, :lo12:__image_copy_end	/* x2 <- address bits [11:00] */
copy_loop:
	ldp	x10, x11, [x1], #16	/* copy from source address [x1] */
	stp	x10, x11, [x0], #16	/* copy to   target address [x0] */
	cmp	x1, x2			/* until source end address [x2] */
	b.lo	copy_loop
	str	x0, [sp, #24]

	/*
	 * Fix .rela.dyn relocations
	 */
	adrp	x2, __rel_dyn_start		/* x2 <- address bits [31:12] */
	add	x2, x2, :lo12:__rel_dyn_start	/* x2 <- address bits [11:00] */
	adrp	x3, __rel_dyn_end		/* x3 <- address bits [31:12] */
	add	x3, x3, :lo12:__rel_dyn_end	/* x3 <- address bits [11:00] */
fixloop:
	ldp	x0, x1, [x2], #16	/* (x0,x1) <- (SRC location, fixup) */
	ldr	x4, [x2], #8		/* x4 <- addend */
	and	x1, x1, #0xffffffff
	cmp	x1, #R_AARCH64_RELATIVE
	bne	fixnext

	/* relative fix: store addend plus offset at dest location */
	add	x0, x0, x9
	add	x4, x4, x9
	str	x4, [x0]
fixnext:
	cmp	x2, x3
	b.lo	fixloop

relocate_done:
	switch_el x1, 3f, 2f, 1f
	bl	hang
3:	mrs	x0, sctlr_el3
	b	0f
2:	mrs	x0, sctlr_el2
	b	0f
1:	mrs	x0, sctlr_el1
0:	tbz	w0, #2, 5f	/* skip flushing cache if disabled */
	tbz	w0, #12, 4f	/* skip invalidating i-cache if disabled */
	ic	iallu		/* i-cache invalidate all */
	isb	sy
4:	ldp	x0, x1, [sp, #16]
	bl	__asm_flush_dcache_range
	bl     __asm_flush_l3_dcache
5:	ldp	x29, x30, [sp],#32
	ret
ENDPROC(relocate_code)