riscv: dts: sync mpfs-icicle devicetree with linux
The "notable" disappearances are:
- the pac193x stanza - there's nothing in mainline linux w.r.t. bindings
for this & what is going to appear in mainline linux is going to be
incompatible with what is currently in U-Boot.
- operating points - these operating points should not be set at the
soc.dtsi level as they may not be possible depending on the design
programmed to the FPGA
- clock output names - there are defines for the clock indices, these
should not be needed
- the dt maintainers in linux NAKed using defines for IRQ numbers
- the qspi nand, which is not part of the icicle's default configuration
is removed.
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rick Chen <rick@andestech.com>
diff --git a/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi
new file mode 100644
index 0000000..1069134
--- /dev/null
+++ b/arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/ {
+ compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+ "microchip,mpfs";
+
+ core_pwm0: pwm@40000000 {
+ compatible = "microchip,corepwm-rtl-v4";
+ reg = <0x0 0x40000000 0x0 0xF0>;
+ microchip,sync-update-mask = /bits/ 32 <0>;
+ #pwm-cells = <3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40000200 {
+ compatible = "microchip,corei2c-rtl-v7";
+ reg = <0x0 0x40000200 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ interrupt-parent = <&plic>;
+ interrupts = <122>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ pcie: pcie@3000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic1", "fic3";
+ ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ refclk_ccc: cccrefclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
+
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};