Merge tag 'efi-2025-07-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-07-rc1-3
Documentation:
* add documentation for the DeepComputing FML13V01
* fix typos
UEFI:
* build with HII configuration protocol
* print image load address in StartImage
Boards:
* qemu-riscv raise CONFIG_NR_DRAM_BANKS
* add support for the DeepComputing FML13V01 board via
starfive_visionfive2_defconfig
* add UNIT_TESTS to big-endian Malta boards
diff --git a/arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi b/arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi
new file mode 100644
index 0000000..ab882d0
--- /dev/null
+++ b/arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ */
+
+#include "jh7110-common-u-boot.dtsi"
+#include "starfive-visionfive2-binman.dtsi"
diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c
index 3e4d3e2..9a3081e 100644
--- a/board/starfive/visionfive2/spl.c
+++ b/board/starfive/visionfive2/spl.c
@@ -125,7 +125,10 @@
if (strncmp(name, "starfive/", 9))
return -EINVAL;
name += 9;
- if (!strncmp(product_id, "VF7110", 6)) {
+ if (!strncmp(product_id, "FML13V01", 8) &&
+ !strcmp(name, "jh7110-deepcomputing-fml13v01")) {
+ return 0;
+ } else if (!strncmp(product_id, "VF7110", 6)) {
version = get_pcb_revision_from_eeprom();
if ((version == 'b' || version == 'B') &&
!strcmp(name, "jh7110-starfive-visionfive-2-v1.3b"))
diff --git a/board/starfive/visionfive2/starfive_visionfive2.c b/board/starfive/visionfive2/starfive_visionfive2.c
index b8cd509..5fe888d 100644
--- a/board/starfive/visionfive2/starfive_visionfive2.c
+++ b/board/starfive/visionfive2/starfive_visionfive2.c
@@ -17,6 +17,8 @@
DECLARE_GLOBAL_DATA_PTR;
#define JH7110_L2_PREFETCHER_BASE_ADDR 0x2030000
#define JH7110_L2_PREFETCHER_HART_OFFSET 0x2000
+#define FDTFILE_FML13V01 \
+ "starfive/jh7110-deepcomputing-fml13v01.dtb"
#define FDTFILE_MILK_V_MARS \
"starfive/jh7110-milkv-mars.dtb"
#define FDTFILE_VISIONFIVE2_1_2A \
@@ -63,7 +65,9 @@
log_err("Can't read EEPROM\n");
return;
}
- if (!strncmp(product_id, "MARS", 4)) {
+ if (!strncmp(product_id, "FML13V01", 8)) {
+ fdtfile = FDTFILE_FML13V01;
+ } else if (!strncmp(product_id, "MARS", 4)) {
fdtfile = FDTFILE_MILK_V_MARS;
} else if (!strncmp(product_id, "VF7110", 6)) {
version = get_pcb_revision_from_eeprom();
diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig
index ec5df0b..d1211b0 100644
--- a/configs/malta64_defconfig
+++ b/configs/malta64_defconfig
@@ -46,3 +46,4 @@
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
CONFIG_SYS_NS16550_PORT_MAPPED=y
+CONFIG_UNIT_TEST=y
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index ca017c4..dfa37d1 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -45,3 +45,4 @@
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
CONFIG_SYS_NS16550_PORT_MAPPED=y
+CONFIG_UNIT_TEST=y
diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig
index b9f2887..b9cb780 100644
--- a/configs/qemu-riscv32_defconfig
+++ b/configs/qemu-riscv32_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig
index cd89571..8a09d80 100644
--- a/configs/qemu-riscv32_smode_defconfig
+++ b/configs/qemu-riscv32_smode_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig
index 8d5f9d9..c4b6d57 100644
--- a/configs/qemu-riscv32_spl_defconfig
+++ b/configs/qemu-riscv32_spl_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig
index c67fb9a..6b2fed4 100644
--- a/configs/qemu-riscv64_defconfig
+++ b/configs/qemu-riscv64_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig
index d28e9fb..95f24ac 100644
--- a/configs/qemu-riscv64_smode_defconfig
+++ b/configs/qemu-riscv64_smode_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig
index 18b7e04..d2b0aec 100644
--- a/configs/qemu-riscv64_spl_defconfig
+++ b/configs/qemu-riscv64_spl_defconfig
@@ -1,6 +1,5 @@
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_LEN=0x800000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x20000
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index 6a5b247..e145ced 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -80,7 +80,7 @@
CONFIG_CMD_WGET=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_OF_BOARD=y
-CONFIG_OF_LIST="starfive/jh7110-milkv-mars starfive/jh7110-pine64-star64 starfive/jh7110-starfive-visionfive-2-v1.2a starfive/jh7110-starfive-visionfive-2-v1.3b"
+CONFIG_OF_LIST="starfive/jh7110-deepcomputing-fml13v01 starfive/jh7110-milkv-mars starfive/jh7110-pine64-star64 starfive/jh7110-starfive-visionfive-2-v1.2a starfive/jh7110-starfive-visionfive-2-v1.3b"
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
diff --git a/doc/arch/arm64.rst b/doc/arch/arm64.rst
index 19662be..d72200f 100644
--- a/doc/arch/arm64.rst
+++ b/doc/arch/arm64.rst
@@ -14,11 +14,11 @@
-----
1. U-Boot can run at any exception level it is entered in, it is
- recommened to enter it in EL3 if U-Boot takes some responsibilities of a
+ recommended to enter it in EL3 if U-Boot takes some responsibilities of a
classical firmware (like initial hardware setup, CPU errata workarounds
or SMP bringup). U-Boot can be entered in EL2 when its main purpose is
that of a boot loader. It can drop to lower exception levels before
- entering the OS. For ARMv8-R it is recommened to enter at S-EL1, as for this
+ entering the OS. For ARMv8-R it is recommended to enter at S-EL1, as for this
architecture there is no S-EL3.
2. U-Boot for arm64 is compiled with AArch64-gcc. AArch64-gcc
diff --git a/doc/board/starfive/deepcomputing_fml13v01.rst b/doc/board/starfive/deepcomputing_fml13v01.rst
new file mode 100644
index 0000000..5d96124
--- /dev/null
+++ b/doc/board/starfive/deepcomputing_fml13v01.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+DeepComputing Framework Motherboard (FLM13V01)
+==============================================
+
+The DeepComputing Framework motherboard (FLM13V01) can be combined with a
+13 inch Framework laptop chassis to provide a complete laptop.
+
+U-Boot for the board uses the same binaries as the VisionFive 2 board.
+Currently only serial console output is supported by mainline U-Boot.
+
+Building
+--------
+
+Setup the cross compilation environment variable:
+
+.. code-block:: bash
+
+ export CROSS_COMPILE=riscv64-linux-gnu-
+
+The M-mode software OpenSBI provides the supervisor binary interface (SBI) and
+is responsible for the switch to S-Mode. It is a prerequisite for building
+U-Boot. Support for the JH7110 was introduced in OpenSBI 1.2. It is recommended
+to use a current release.
+
+.. code-block:: bash
+
+ git clone https://github.com/riscv/opensbi.git
+ cd opensbi
+ make PLATFORM=generic FW_TEXT_START=0x40000000 FW_OPTIONS=0
+ export OPENSBI="$(pwd)/build/platform/generic/firmware/fw_dynamic.bin"
+
+Now build U-Boot SPL and main U-Boot.
+
+.. code-block:: bash
+
+ cd <U-Boot-dir>
+ make starfive_visionfive2_defconfig
+ make
+
+This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
+as the FIT image (u-boot.itb) with OpenSBI, U-Boot, and device-trees.
+
+Device-tree selection
+---------------------
+
+The product ID stored in the board EEPROM is used by U-Boot SPL to select the
+right configuration and device-tree from the u-boot.itb FIT image.
+
+Furthermore if variable $fdtfile has not been saved in the environment it is
+set based on the product ID to *starfive/jh7110-deepcomputing-fml13v01.dtb*.
+
+To overrule this default the variable can be set manually and saved in the
+environment
+
+.. code-block:: console
+
+ setenv fdtfile my_device-tree.dtb
+ env save
+
+Power switch
+------------
+
+A tiny power switch is located in right upper corner of the board.
+
+Open case detection
+-------------------
+
+The board has an open case detection switch. Red lights will flash and the
+board will not boot if the switch is not held down.
+
+UART
+----
+
+UART 0 is exposed via the side channel contacts SBU1 and SBU2 of the lower,
+right USB C connector. A USB C cable and a breakout board are needed for
+physical access. It depends on the cable orientation on which of SBU1 and SBU2
+you will find RX and TX. The signal voltage is 3.3 V. The baud rate is 115200.
+
+.. include:: jh7110_common.rst
diff --git a/doc/board/starfive/index.rst b/doc/board/starfive/index.rst
index 2cba1b6..66abc6f 100644
--- a/doc/board/starfive/index.rst
+++ b/doc/board/starfive/index.rst
@@ -6,6 +6,7 @@
.. toctree::
:maxdepth: 1
+ deepcomputing_fml13v01
milk-v_mars
pine64_star64
visionfive2
diff --git a/doc/board/starfive/jh7110_common.rst b/doc/board/starfive/jh7110_common.rst
new file mode 100644
index 0000000..4a8058e
--- /dev/null
+++ b/doc/board/starfive/jh7110_common.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Boot source selection
+---------------------
+
+The board provides DIP switches to select the device for loading the boot
+firmware.
+
+=========== === ===
+Boot source SW1 SW2
+=========== === ===
+UART OFF OFF
+SD-card ON OFF
+eMMC OFF ON
+SPI flash ON ON
+=========== === ===
+
+Flashing a new U-Boot version
+-----------------------------
+
+U-Boot SPL is provided as file spl/u-boot-spl.bin.normal.out. Main U-Boot is
+in file u-boot.itb.
+
+Assuming your new U-Boot version is on partition 1 of an SD-card you could
+install it to the SPI flash with:
+
+.. code-block:: console
+
+ sf probe
+ load mmc 1:1 $kernel_addr_r u-boot-spl.bin.normal.out
+ sf update $kernel_addr_r 0 $filesize
+ load mmc 1:1 $kernel_addr_r u-boot.itb
+ sf update $kernel_addr_r 0x100000 $filesize
+
+For loading the files from a TFTP server refer to the dhcp and tftpboot
+commands.
+
+After updating U-Boot you may want to erase a saved environment and reboot.
+
+.. code-block:: console
+
+ env erase
+ reset
+
+Booting from SD-Card
+--------------------
+
+The device boot ROM loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
+partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
+to choose any partition number.
+
+With the default configuration U-Boot SPL loads the U-Boot FIT image
+(u-boot.itb) from partition 2 (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2).
+When formatting it is recommended to use GUID
+BC13C2FF-59E6-4262-A352-B275FD6F7172 for this partition.
+
+Booting from eMMC
+-----------------
+
+The device boot ROM tries to load U-Boot SPL (u-boot-spl.bin.normal.out) from
+sector 0 of the eMMC's main hardware partition. But this conflicts with GPT
+partitioning. Fortunately eMMC can alternatively load U-Boot SPL from a backup
+position.
+
+For U-Boot SPL (u-boot-spl.bin.normal.out) starting at sector 2048 (position
+0x100000) write the following bytes to the eMMC device after GPT partitioning:
+
+======= ========================
+Address Bytes
+======= ========================
+0x0000 40 02 00 00 00 00 10 00
+0x0290 40 02 00 00 00 00 10 00
+======= ========================
+
+With the default configuration U-Boot SPL loads the U-Boot FIT image
+(u-boot.itb) from partition 2 (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2).
+When formatting it is recommended to use GUID
+BC13C2FF-59E6-4262-A352-B275FD6F7172 for this partition.
+
+Booting from UART
+-----------------
+
+The boot ROM supports the X-modem protocol to upload
+spl/u-boot-spl.bin.normal.out. U-Boot SPL support loading the FIT image
+u-boot.itb via the Y-modem protocol.
+
+Due to restrictions of the boot ROM not all X-modem implementations are
+compatible. The package tio (https://github.com/tio/tio) has been found to be
+usable.
+
+Debug UART
+----------
+
+By default the SBI interface is used for the debug UART. But this only works
+in main U-Boot. To enable the debug UART in SPL, too, use the following
+settings::
+
+ CONFIG_DEBUG_UART=y
+ CONFIG_DEBUG_UART_NS16550=y
+ CONFIG_DEBUG_UART_BASE=0x10000000
+ CONFIG_SPL_DEBUG_UART_BASE=0x10000000
+ CONFIG_DEBUG_UART_CLOCK=24000000
+ CONFIG_DEBUG_UART_SHIFT=2
diff --git a/doc/board/starfive/milk-v_mars.rst b/doc/board/starfive/milk-v_mars.rst
index 554932e..ce4539a 100644
--- a/doc/board/starfive/milk-v_mars.rst
+++ b/doc/board/starfive/milk-v_mars.rst
@@ -8,7 +8,7 @@
accordingly.
Building
-~~~~~~~~
+--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -40,7 +40,7 @@
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
Depending on the board version U-Boot set variable $fdtfile to either
starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
@@ -57,15 +57,8 @@
or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
provide a default value.
-Boot source selection
-~~~~~~~~~~~~~~~~~~~~~
-
-The board provides the DIP switches MSEL[1:0] to select the boot device out of
-SPI flash, eMMC, SD-card, UART. To select booting from SD-card set the DIP
-switches MSEL[1:0] to 10.
-
Preparing the SD-Card
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -105,7 +98,4 @@
sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
sudo umount /mnt
-Booting
-~~~~~~~
-
-Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+.. include:: jh7110_common.rst
diff --git a/doc/board/starfive/pine64_star64.rst b/doc/board/starfive/pine64_star64.rst
index 52e9a90..d1752c4 100644
--- a/doc/board/starfive/pine64_star64.rst
+++ b/doc/board/starfive/pine64_star64.rst
@@ -8,7 +8,7 @@
accordingly.
Building
-~~~~~~~~
+--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -40,7 +40,7 @@
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb.
@@ -55,21 +55,8 @@
or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
provide a default value.
-Boot source selection
-~~~~~~~~~~~~~~~~~~~~~
-
-Boot mode is selected by an MSEL-DIP marked S1804 and GPIO_0 position adjacent
-to the 40pin GPIO header. ON/ONKE and number markings of the MSEL-DIP are
-misleading; Instead refer to the ``L`` (0) and ``H`` (1) silkscreen for
-accurate selection.
-
-+ (QSPI) Flash: 00
-+ SD: 01
-+ EMMC: 10
-+ UART: 11
-
Preparing the SD-Card
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -109,13 +96,10 @@
sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
sudo umount /mnt
-Booting
-~~~~~~~
-
-Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+.. include:: jh7110_common.rst
Serial Number and MAC address issues
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------------
U-Boot requires valid EEPROM data to determine which board-specific fix-up to
apply at runtime. This affects the size of memory initialized, network mac
diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst
index 2c68df3..6f3c572 100644
--- a/doc/board/starfive/visionfive2.rst
+++ b/doc/board/starfive/visionfive2.rst
@@ -36,7 +36,7 @@
firmware with the latest.
Building
-~~~~~~~~
+--------
1. Add the RISC-V toolchain to your PATH.
2. Setup ARCH & cross compilation environment variable:
@@ -72,7 +72,7 @@
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
Depending on the board version U-Boot set variable $fdtfile to either
starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
@@ -90,7 +90,7 @@
a default value.
Flashing
-~~~~~~~~
+--------
The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
@@ -132,16 +132,10 @@
sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
sudo umount /mnt
-Booting
-~~~~~~~
-
-The board provides the DIP switches MSEL[1:0] to select the boot device.
-To select booting from SD-card set the DIP switches MSEL[1:0] to 10.
-
-Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+.. include:: jh7110_common.rst
Sample boot log from StarFive VisionFive2 board
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------
.. code-block:: none
@@ -479,34 +473,3 @@
Welcome to Buildroot
buildroot login:
-
-Booting from SPI
-----------------
-
-Use Building steps from "Booting from MMC using U-Boot SPL" section.
-
-Partition the SPI in Linux via mtdblock. (Require to boot the board in
-SD boot mode by enabling MTD block in Linux)
-
-Use prebuilt image from here [1], which support to partition the SPI flash.
-
-
-Program the SPI (Require to boot the board in SD boot mode)
-
-Execute below steps on U-Boot proper,
-
-.. code-block:: none
-
- sf probe
- fatload mmc 1:3 $kernel_addr_r u-boot.itb
- sf update $kernel_addr_r 0x100000 $filesize
-
- fatload mmc 1:3 $kernel_addr_r u-boot-spl.bin.normal.out
- sf update $kernel_addr_r 0x0 $filesize
-
-
-Power off the board
-
-Change DIP switches MSEL[1:0] are set to 00, select the boot mode to flash
-
-Power up the board.
diff --git a/doc/usage/blkmap.rst b/doc/usage/blkmap.rst
index 75f736c..4e9091e 100644
--- a/doc/usage/blkmap.rst
+++ b/doc/usage/blkmap.rst
@@ -39,7 +39,7 @@
dhcp ${ramdisk_addr_r} rootfs.ext4
-But now we are faced with a predicament: how to we extract the kernel
+But now we are faced with a predicament: how do we extract the kernel
image? Block maps to the rescue!
We start by creating a new device:
diff --git a/doc/usage/cmd/md.rst b/doc/usage/cmd/md.rst
index 9a9919f..1eeaa82 100644
--- a/doc/usage/cmd/md.rst
+++ b/doc/usage/cmd/md.rst
@@ -21,7 +21,7 @@
various data sizes and uses the endianness of the target.
The specified data_size and length become the defaults for future memory
-commands commands.
+commands.
address
start address to display
diff --git a/doc/usage/cmd/part.rst b/doc/usage/cmd/part.rst
index e7faecc..e7f6e54 100644
--- a/doc/usage/cmd/part.rst
+++ b/doc/usage/cmd/part.rst
@@ -50,7 +50,7 @@
varname
an optional environment variable to store the list of partitions value into.
-The 'part start' commnad sets an environment variable to the start of the partition (in blocks),
+The 'part start' command sets an environment variable to the start of the partition (in blocks),
part can be either partition number or partition name.
interface
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index ab50a69..cf050e5 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -37,7 +37,7 @@
obj-y += efi_dt_fixup.o
obj-y += efi_fdt.o
obj-y += efi_file.o
-obj-$(CONFIG_EFI_LOADER_HII) += efi_hii.o
+obj-$(CONFIG_EFI_LOADER_HII) += efi_hii.o efi_hii_config.o
obj-y += efi_image_loader.o
obj-y += efi_load_options.o
obj-y += efi_memory.o
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index f220daa..dbebb37 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -3195,7 +3195,7 @@
struct efi_loaded_image_obj *image_obj =
(struct efi_loaded_image_obj *)image_handle;
efi_status_t ret;
- void *info;
+ struct efi_loaded_image *info;
efi_handle_t parent_image = current_image;
efi_status_t exit_status;
jmp_buf exit_jmp;
@@ -3213,7 +3213,7 @@
return EFI_EXIT(EFI_SECURITY_VIOLATION);
ret = EFI_CALL(efi_open_protocol(image_handle, &efi_guid_loaded_image,
- &info, NULL, NULL,
+ (void **)&info, NULL, NULL,
EFI_OPEN_PROTOCOL_GET_PROTOCOL));
if (ret != EFI_SUCCESS)
return EFI_EXIT(EFI_INVALID_PARAMETER);
@@ -3266,7 +3266,8 @@
current_image = image_handle;
image_obj->header.type = EFI_OBJECT_TYPE_STARTED_IMAGE;
- EFI_PRINT("Jumping into 0x%p\n", image_obj->entry);
+ EFI_PRINT("Starting image loaded at 0x%p, entry point 0x%p\n",
+ info->image_base, image_obj->entry);
ret = EFI_CALL(image_obj->entry(image_handle, &systab));
/*
diff --git a/lib/efi_loader/efi_hii_config.c b/lib/efi_loader/efi_hii_config.c
index 37d8c66..521481a 100644
--- a/lib/efi_loader/efi_hii_config.c
+++ b/lib/efi_loader/efi_hii_config.c
@@ -4,10 +4,6 @@
*
* Copyright (c) 2017 Leif Lindholm
* Copyright (c) 2018 AKASHI Takahiro, Linaro Limited
- *
- * As this is still a non-working stub and the protocol is neither required
- * by the EFI shell nor by the UEFI SCT this module has been removed from
- * the Makefile.
*/
#define LOG_CATEGORY LOGC_EFI
diff --git a/lib/efi_loader/efi_root_node.c b/lib/efi_loader/efi_root_node.c
index 74225ed..e5246f6 100644
--- a/lib/efi_loader/efi_root_node.c
+++ b/lib/efi_loader/efi_root_node.c
@@ -80,6 +80,9 @@
/* HII database protocol */
&efi_guid_hii_database_protocol,
&efi_hii_database,
+ /* EFI HII Configuration Routing Protocol */
+ &efi_guid_hii_config_routing_protocol,
+ &efi_hii_config_routing,
#endif
NULL);
efi_root->type = EFI_OBJECT_TYPE_U_BOOT_FIRMWARE;