arm: dts: ls1028a: move the UART controller nodes into /soc
While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index ecafa67..07aeb38 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -43,22 +43,6 @@
IRQ_TYPE_LEVEL_LOW)>;
};
- serial0: serial@21c0500 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- serial1: serial@21c0600 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
pcie1: pcie@3400000 {
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x80000
@@ -484,5 +468,21 @@
bus-width = <4>;
status = "disabled";
};
+
+ serial0: serial@21c0500 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ serial1: serial@21c0600 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
};