rockchip: Use an external TPL binary on RK3568
Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps
back to BootRom to load next stage, U-Boot SPL, into DRAM. BootRom then
jumps to U-Boot SPL to continue the normal boot flow.
However, there is no support to initialize DRAM on RK35xx SoCs using
U-Boot TPL and instead an external TPL binary must be used to generate a
bootable u-boot-rockchip.bin image.
Add CONFIG_ROCKCHIP_EXTERNAL_TPL to indicate that an external TPL should
be used. Build U-Boot with ROCKCHIP_TPL=/path/to/ddr.bin to generate a
bootable u-boot-rockchip.bin image for RK3568.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
diff --git a/Makefile b/Makefile
index 700be23..e760bac 100644
--- a/Makefile
+++ b/Makefile
@@ -1336,6 +1336,7 @@
-a opensbi-path=${OPENSBI} \
-a default-dt=$(default_dt) \
-a scp-path=$(SCP) \
+ -a rockchip-tpl-path=$(ROCKCHIP_TPL) \
-a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
-a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
-a spl-dtb=$(CONFIG_SPL_OF_REAL) \
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index 6c662a7..2878b80 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -20,9 +20,12 @@
mkimage {
filename = "idbloader.img";
args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
-#ifdef CONFIG_TPL
multiple-data-files;
+#ifdef CONFIG_ROCKCHIP_EXTERNAL_TPL
+ rockchip-tpl {
+ };
+#elif defined(CONFIG_TPL)
u-boot-tpl {
};
#endif
@@ -134,9 +137,12 @@
mkimage {
filename = "idbloader-spi.img";
args = "-n", CONFIG_SYS_SOC, "-T", "rkspi";
-#ifdef CONFIG_TPL
multiple-data-files;
+#ifdef CONFIG_ROCKCHIP_EXTERNAL_TPL
+ rockchip-tpl {
+ };
+#elif defined(CONFIG_TPL)
u-boot-tpl {
};
#endif
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b678ec4..0b191b3 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -401,6 +401,14 @@
common board is a basic TPL board init which can be shared for most
of SoCs to avoid copy-paste for different SoCs.
+config ROCKCHIP_EXTERNAL_TPL
+ bool "Use external TPL binary"
+ default y if ROCKCHIP_RK3568
+ help
+ Some Rockchip SoCs require an external TPL to initialize DRAM.
+ Enable this option and build with ROCKCHIP_TPL=/path/to/ddr.bin to
+ include the external TPL in the image built by binman.
+
config ROCKCHIP_BOOT_MODE_REG
hex "Rockchip boot mode flag register address"
help
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 28c837a..ac4dcce 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -86,6 +86,8 @@
- Radxa ROCK Pi 4 (rock-pi-4-rk3399)
- Rockchip Evb-RK3399 (evb_rk3399)
- Theobroma Systems RK3399-Q7 SoM - Puma (puma_rk3399)
+* rk3568
+ - Rockchip Evb-RK3568 (evb-rk3568)
* rv1108
- Rockchip Evb-rv1108 (evb-rv1108)
- Elgin-R1 (elgin-rv1108)
@@ -167,6 +169,15 @@
make evb-rk3399_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
+To build rk3568 boards:
+
+.. code-block:: bash
+
+ export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf
+ export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1560MHz_v1.13.bin
+ make evb-rk3568_defconfig
+ make CROSS_COMPILE=aarch64-linux-gnu-
+
Flashing
--------