usb: xhci-mtk: support option to disable ports
Add support to disable specific ports, it's useful for some
scenarios:
1. usb3 PHY is shared whith PCIe or SATA, the corresponding
usb3 port can be disabled;
2. some usb2 or usb3 ports are not used on special platforms,
they should be disabled to save power.
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index d301acc..18b4f55 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -61,10 +61,13 @@
struct phy_bulk phys;
int num_u2ports;
int num_u3ports;
+ u32 u3p_dis_msk;
+ u32 u2p_dis_msk;
};
static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
{
+ int u3_ports_disabed = 0;
u32 value;
u32 check_val;
int ret;
@@ -73,15 +76,23 @@
/* power on host ip */
clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
- /* power on and enable all u3 ports */
+ /* power on and enable u3 ports except skipped ones */
for (i = 0; i < mtk->num_u3ports; i++) {
+ if (BIT(i) & mtk->u3p_dis_msk) {
+ u3_ports_disabed++;
+ continue;
+ }
+
clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
CTRL_U3_PORT_HOST_SEL);
}
- /* power on and enable all u2 ports */
+ /* power on and enable u2 ports except skipped ones */
for (i = 0; i < mtk->num_u2ports; i++) {
+ if (BIT(i) & mtk->u2p_dis_msk)
+ continue;
+
clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
CTRL_U2_PORT_HOST_SEL);
@@ -94,7 +105,7 @@
check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
STS1_SYS125_RST | STS1_XHCI_RST;
- if (mtk->num_u3ports)
+ if (mtk->num_u3ports > u3_ports_disabed)
check_val |= STS1_U3_MAC_RST;
ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
@@ -176,6 +187,12 @@
if (ret)
debug("can't get vbus regulator %d!\n", ret);
+ /* optional properties to disable ports, ignore the error */
+ dev_read_u32(dev, "mediatek,u3p-dis-msk", &mtk->u3p_dis_msk);
+ dev_read_u32(dev, "mediatek,u2p-dis-msk", &mtk->u2p_dis_msk);
+ dev_info(dev, "ports disabled mask: u3p-0x%x, u2p-0x%x\n",
+ mtk->u3p_dis_msk, mtk->u2p_dis_msk);
+
return 0;
}