video: anx9804: split out registers definitions into a separate header
This header will be used in anx6345 driver
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[agust: moved header to drivers/video]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
diff --git a/drivers/video/anx98xx-edp.h b/drivers/video/anx98xx-edp.h
new file mode 100644
index 0000000..f7e8baa
--- /dev/null
+++ b/drivers/video/anx98xx-edp.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2017 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* Registers at i2c address 0x38 */
+
+#define ANX9804_HDCP_CONTROL_0_REG 0x01
+
+#define ANX9804_SYS_CTRL1_REG 0x80
+#define ANX9804_SYS_CTRL1_PD_IO 0x80
+#define ANX9804_SYS_CTRL1_PD_VID 0x40
+#define ANX9804_SYS_CTRL1_PD_LINK 0x20
+#define ANX9804_SYS_CTRL1_PD_TOTAL 0x10
+#define ANX9804_SYS_CTRL1_MODE_SEL 0x08
+#define ANX9804_SYS_CTRL1_DET_STA 0x04
+#define ANX9804_SYS_CTRL1_FORCE_DET 0x02
+#define ANX9804_SYS_CTRL1_DET_CTRL 0x01
+
+#define ANX9804_SYS_CTRL2_REG 0x81
+#define ANX9804_SYS_CTRL2_CHA_STA 0x04
+
+#define ANX9804_SYS_CTRL3_REG 0x82
+#define ANX9804_SYS_CTRL3_VALID_CTRL BIT(0)
+#define ANX9804_SYS_CTRL3_F_VALID BIT(1)
+#define ANX9804_SYS_CTRL3_HPD_CTRL BIT(4)
+#define ANX9804_SYS_CTRL3_F_HPD BIT(5)
+
+#define ANX9804_LINK_BW_SET_REG 0xa0
+#define ANX9804_LANE_COUNT_SET_REG 0xa1
+#define ANX9804_TRAINING_PTN_SET_REG 0xa2
+#define ANX9804_TRAINING_LANE0_SET_REG 0xa3
+#define ANX9804_TRAINING_LANE1_SET_REG 0xa4
+#define ANX9804_TRAINING_LANE2_SET_REG 0xa5
+#define ANX9804_TRAINING_LANE3_SET_REG 0xa6
+
+#define ANX9804_LINK_TRAINING_CTRL_REG 0xa8
+#define ANX9804_LINK_TRAINING_CTRL_EN BIT(0)
+
+#define ANX9804_LINK_DEBUG_REG 0xb8
+#define ANX9804_PLL_CTRL_REG 0xc7
+#define ANX9804_ANALOG_POWER_DOWN_REG 0xc8
+
+#define ANX9804_AUX_CH_STA 0xe0
+#define ANX9804_AUX_BUSY BIT(4)
+#define ANX9804_AUX_STATUS_MASK 0x0f
+
+#define ANX9804_DP_AUX_RX_COMM 0xe3
+#define ANX9804_AUX_RX_COMM_I2C_DEFER BIT(3)
+#define ANX9804_AUX_RX_COMM_AUX_DEFER BIT(1)
+
+#define ANX9804_DP_AUX_CH_CTL_1 0xe5
+#define ANX9804_AUX_LENGTH(x) (((x - 1) & 0x0f) << 4)
+#define ANX9804_AUX_TX_COMM_MASK 0x0f
+#define ANX9804_AUX_TX_COMM_DP_TRANSACTION BIT(3)
+#define ANX9804_AUX_TX_COMM_MOT BIT(2)
+#define ANX9804_AUX_TX_COMM_READ BIT(0)
+
+#define ANX9804_DP_AUX_ADDR_7_0 0xe6
+#define ANX9804_DP_AUX_ADDR_15_8 0xe7
+#define ANX9804_DP_AUX_ADDR_19_16 0xe8
+
+#define ANX9804_DP_AUX_CH_CTL_2 0xe9
+#define ANX9804_ADDR_ONLY BIT(1)
+#define ANX9804_AUX_EN BIT(0)
+
+#define ANX9804_BUF_DATA_0 0xf0
+
+/* Registers at i2c address 0x39 */
+
+#define ANX9804_DEV_IDH_REG 0x03
+
+#define ANX9804_POWERD_CTRL_REG 0x05
+#define ANX9804_POWERD_AUDIO BIT(4)
+
+#define ANX9804_RST_CTRL_REG 0x06
+
+#define ANX9804_RST_CTRL2_REG 0x07
+#define ANX9804_RST_CTRL2_AUX BIT(2)
+#define ANX9804_RST_CTRL2_AC_MODE BIT(6)
+
+#define ANX9804_VID_CTRL1_REG 0x08
+#define ANX9804_VID_CTRL1_VID_EN BIT(7)
+#define ANX9804_VID_CTRL1_EDGE BIT(0)
+
+#define ANX9804_VID_CTRL2_REG 0x09
+#define ANX9804_ANALOG_DEBUG_REG1 0xdc
+#define ANX9804_ANALOG_DEBUG_REG3 0xde
+#define ANX9804_PLL_FILTER_CTRL1 0xdf
+#define ANX9804_PLL_FILTER_CTRL3 0xe1
+#define ANX9804_PLL_FILTER_CTRL 0xe2
+#define ANX9804_PLL_CTRL3 0xe6
+
+#define ANX9804_DP_INT_STA 0xf7
+#define ANX9804_RPLY_RECEIV BIT(1)
+#define ANX9804_AUX_ERR BIT(0)