dm: pci: Use driver model PCI API in auto-config
At present we are using legacy functions even in the auto-configuration code
used by driver model. Add a new pci_auto.c version which uses the correct
API.
Create a new pci_internal.h header to hold functions that are used within
the PCI subsystem, but are not exported to other drivers.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/drivers/pci/pci_internal.h b/drivers/pci/pci_internal.h
new file mode 100644
index 0000000..0867575
--- /dev/null
+++ b/drivers/pci/pci_internal.h
@@ -0,0 +1,50 @@
+/*
+ * Internal PCI functions, not exported outside drivers/pci
+ *
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __pci_internal_h
+#define __pci_internal_h
+
+/**
+ * dm_pciauto_prescan_setup_bridge() - Set up a bridge for scanning
+ *
+ * This gets a bridge ready so that its downstream devices can be scanned.
+ * It sets up the bus number and memory range registers. Once the scan is
+ * completed, dm_pciauto_postscan_setup_bridge() should be called.
+ *
+ * @dev: Bridge device to be scanned
+ * @sub_bus: Bus number of the 'other side' of the bridge
+ */
+void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus);
+
+/**
+ * dm_pciauto_postscan_setup_bridge() - Finish set up of a bridge after scanning
+ *
+ * This should be called after a bus scan is complete. It adjusts the memory
+ * ranges to fit with the devices actually found on the other side (downstream)
+ * of the bridge.
+ *
+ * @dev: Bridge device that was scanned
+ * @sub_bus: Bus number of the 'other side' of the bridge
+ */
+void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus);
+
+/**
+ * dm_pciauto_config_device() - Configure a PCI device ready for use
+ *
+ * If the device is a bridge, downstream devices will be probed.
+ *
+ * @dev: Device to configure
+ * @return the maximum PCI bus number found by this device. If there are no
+ * bridges, this just returns the device's bus number. If the device is a
+ * bridge then it will return a larger number, depending on the devices on
+ * that bridge. On error, returns a -ve error number.
+ */
+int dm_pciauto_config_device(struct udevice *dev);
+
+#endif