Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile
deleted file mode 100644
index 05601b48..0000000
--- a/board/adsvix/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := adsvix.o pcmcia.o
-SOBJS := lowlevel_init.o pxavoltage.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c
deleted file mode 100644
index c430d63..0000000
--- a/board/adsvix/adsvix.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of ADSVIX-Board */
- gd->bd->bi_arch_number = 620;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa000003c;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- return 0;
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
- return 0;
-}
diff --git a/board/adsvix/config.mk b/board/adsvix/config.mk
deleted file mode 100644
index 98be4eb..0000000
--- a/board/adsvix/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-TEXT_BASE = 0xa1700000
diff --git a/board/adsvix/lowlevel_init.S b/board/adsvix/lowlevel_init.S
deleted file mode 100644
index 8dea71c..0000000
--- a/board/adsvix/lowlevel_init.S
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * This was originally from the Lubbock u-boot port.
- *
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-/* wait for coprocessor write complete */
- .macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
- .endm
-
-
-/*
- * Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
- /* Set up GPIO pins first ----------------------------------------- */
-
- ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
- str r1, [r0]
-
- ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
- str r1, [r0]
-
- ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
- str r1, [r0]
-
- ldr r0, =GPSR3
- ldr r1, =CFG_GPSR3_VAL
- str r1, [r0]
-
- ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
- str r1, [r0]
-
- ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
- str r1, [r0]
-
- ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
- str r1, [r0]
-
- ldr r0, =GPCR3
- ldr r1, =CFG_GPCR3_VAL
- str r1, [r0]
-
- ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
- str r1, [r0]
-
- ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
- str r1, [r0]
-
- ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
- str r1, [r0]
-
- ldr r0, =GPDR3
- ldr r1, =CFG_GPDR3_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_L
- ldr r1, =CFG_GAFR3_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_U
- ldr r1, =CFG_GAFR3_U_VAL
- str r1, [r0]
-
- ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
- str r1, [r0]
-
- /* ---------------------------------------------------------------- */
- /* Enable memory interface */
- /* */
- /* The sequence below is based on the recommended init steps */
- /* detailed in the Intel PXA250 Operating Systems Developers Guide, */
- /* Chapter 10. */
- /* ---------------------------------------------------------------- */
-
- /* ---------------------------------------------------------------- */
- /* Step 1: Wait for at least 200 microsedonds to allow internal */
- /* clocks to settle. Only necessary after hard reset... */
- /* FIXME: can be optimized later */
- /* ---------------------------------------------------------------- */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-mem_init:
-
- ldr r1, =MEMC_BASE /* get memory controller base addr. */
-
- /* ---------------------------------------------------------------- */
- /* Step 2a: Initialize Asynchronous static memory controller */
- /* ---------------------------------------------------------------- */
-
- /* MSC registers: timing, bus width, mem type */
-
- /* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
- str r2, [r1, #MSC0_OFFSET]
- ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
- /* that data latches */
- /* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
- str r2, [r1, #MSC1_OFFSET]
- ldr r2, [r1, #MSC1_OFFSET]
-
- /* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
- str r2, [r1, #MSC2_OFFSET]
- ldr r2, [r1, #MSC2_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2b: Initialize Card Interface */
- /* ---------------------------------------------------------------- */
-
- /* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
- str r2, [r1, #MECR_OFFSET]
- ldr r2, [r1, #MECR_OFFSET]
-
- /* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
- str r2, [r1, #MCMEM0_OFFSET]
- ldr r2, [r1, #MCMEM0_OFFSET]
-
- /* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
- str r2, [r1, #MCMEM1_OFFSET]
- ldr r2, [r1, #MCMEM1_OFFSET]
-
- /* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
- str r2, [r1, #MCATT0_OFFSET]
- ldr r2, [r1, #MCATT0_OFFSET]
-
- /* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
- str r2, [r1, #MCATT1_OFFSET]
- ldr r2, [r1, #MCATT1_OFFSET]
-
- /* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
- str r2, [r1, #MCIO0_OFFSET]
- ldr r2, [r1, #MCIO0_OFFSET]
-
- /* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
- str r2, [r1, #MCIO1_OFFSET]
- ldr r2, [r1, #MCIO1_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2c: Write FLYCNFG FIXME: what's that??? */
- /* ---------------------------------------------------------------- */
- ldr r2, =CFG_FLYCNFG_VAL
- str r2, [r1, #FLYCNFG_OFFSET]
- str r2, [r1, #FLYCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
- /* ---------------------------------------------------------------- */
-
- /* Before accessing MDREFR we need a valid DRI field, so we set */
- /* this to power on defaults + DRI field. */
-
- ldr r4, [r1, #MDREFR_OFFSET]
- ldr r2, =0xFFF
- bic r4, r4, r2
-
- ldr r3, =CFG_MDREFR_VAL
- and r3, r3, r2
-
- orr r4, r4, r3
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
-
- orr r4, r4, #MDREFR_K0RUN
- orr r4, r4, #MDREFR_K0DB4
- orr r4, r4, #MDREFR_K0FREE
- orr r4, r4, #MDREFR_K0DB2
- orr r4, r4, #MDREFR_K1DB2
- bic r4, r4, #MDREFR_K1FREE
- bic r4, r4, #MDREFR_K2FREE
-
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
- /* Note: preserve the mdrefr value in r4 */
-
-
- /* ---------------------------------------------------------------- */
- /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
- /* ---------------------------------------------------------------- */
-
- /* Initialize SXCNFG register. Assert the enable bits */
-
- /* Write SXMRS to cause an MRS command to all enabled banks of */
- /* synchronous static memory. Note that SXLCR need not be written */
- /* at this time. */
-
- ldr r2, =CFG_SXCNFG_VAL
- str r2, [r1, #SXCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 4: Initialize SDRAM */
- /* ---------------------------------------------------------------- */
-
- bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE)
-
- orr r4, r4, #MDREFR_K1RUN
- bic r4, r4, #MDREFR_K2DB2
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- bic r4, r4, #MDREFR_SLFRSH
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- orr r4, r4, #MDREFR_E1PIN
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- nop
- nop
-
-
- /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
- /* configure but not enable each SDRAM partition pair. */
-
- ldr r4, =CFG_MDCNFG_VAL
- bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
- bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
-
- str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
- ldr r4, [r1, #MDCNFG_OFFSET]
-
-
- /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
- /* 100..200 µsec. */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-
- /* Step 4f: Trigger a number (usually 8) refresh cycles by */
- /* attempting non-burst read or write accesses to disabled */
- /* SDRAM, as commonly specified in the power up sequence */
- /* documented in SDRAM data sheets. The address(es) used */
- /* for this purpose must not be cacheable. */
-
- ldr r3, =CFG_DRAM_BASE
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
-
-
- /* Step 4g: Write MDCNFG with enable bits asserted */
- /* (MDCNFG:DEx set to 1). */
-
- ldr r3, [r1, #MDCNFG_OFFSET]
- mov r4, r3
- orr r3, r3, #MDCNFG_DE0
- str r3, [r1, #MDCNFG_OFFSET]
- mov r0, r3
-
- /* Step 4h: Write MDMRS. */
-
- ldr r2, =CFG_MDMRS_VAL
- str r2, [r1, #MDMRS_OFFSET]
-
- /* enable APD */
- ldr r3, [r1, #MDREFR_OFFSET]
- orr r3, r3, #MDREFR_APD
- str r3, [r1, #MDREFR_OFFSET]
-
- /* We are finished with Intel's memory controller initialisation */
-
-setvoltage:
-
- mov r10, lr
- bl initPXAvoltage /* In case the board is rebooting with a */
- mov lr, r10 /* low voltage raise it up to a good one. */
-
-wakeup:
- /* Are we waking from sleep? */
- ldr r0, =RCSR
- ldr r1, [r0]
- and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
- str r1, [r0]
- teq r1, #RCSR_SMR
-
- bne initirqs
-
- ldr r0, =PSSR
- mov r1, #PSSR_PH
- str r1, [r0]
-
- /* if so, resume at PSPR */
- ldr r0, =PSPR
- ldr r1, [r0]
- mov pc, r1
-
- /* ---------------------------------------------------------------- */
- /* Disable (mask) all interrupts at interrupt controller */
- /* ---------------------------------------------------------------- */
-
-initirqs:
-
- mov r1, #0 /* clear int. level register (IRQ, not FIQ) */
- ldr r2, =ICLR
- str r1, [r2]
-
- ldr r2, =ICMR /* mask all interrupts at the controller */
- str r1, [r2]
-
- /* ---------------------------------------------------------------- */
- /* Clock initialisation */
- /* ---------------------------------------------------------------- */
-
-initclks:
-
- /* Disable the peripheral clocks, and set the core clock frequency */
-
- /* Turn Off on-chip peripheral clocks (except for memory) */
- /* for re-configuration. */
- ldr r1, =CKEN
- ldr r2, =CFG_CKEN
- str r2, [r1]
-
- /* ... and write the core clock config register */
- ldr r2, =CFG_CCCR
- ldr r1, =CCCR
- str r2, [r1]
-
- /* Turn on turbo mode */
- mrc p14, 0, r2, c6, c0, 0
- orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/
- mcr p14, 0, r2, c6, c0, 0
-
- /* Re-write MDREFR */
- ldr r1, =MEMC_BASE
- ldr r2, [r1, #MDREFR_OFFSET]
- str r2, [r1, #MDREFR_OFFSET]
-#ifdef RTC
- /* enable the 32Khz oscillator for RTC and PowerManager */
- ldr r1, =OSCC
- mov r2, #OSCC_OON
- str r2, [r1]
-
- /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
- /* has settled. */
-60:
- ldr r2, [r1]
- ands r2, r2, #1
- beq 60b
-#else
-#error "RTC not defined"
-#endif
-
- /* Interrupt init: Mask all interrupts */
- ldr r0, =ICMR /* enable no sources */
- mov r1, #0
- str r1, [r0]
- /* FIXME */
-
-#ifdef NODEBUG
- /*Disable software and data breakpoints */
- mov r0,#0
- mcr p15,0,r0,c14,c8,0 /* ibcr0 */
- mcr p15,0,r0,c14,c9,0 /* ibcr1 */
- mcr p15,0,r0,c14,c4,0 /* dbcon */
-
- /*Enable all debug functionality */
- mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 /* dcsr */
-#endif
-
- /* ---------------------------------------------------------------- */
- /* End lowlevel_init */
- /* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
- mov pc, lr
diff --git a/board/adsvix/pcmcia.c b/board/adsvix/pcmcia.c
deleted file mode 100644
index ba5be01..0000000
--- a/board/adsvix/pcmcia.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-void pcmcia_power_on(void)
-{
-#if 0
- if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */
- GPCR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- }
- else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
- }
-#else
-#warning "Board will only supply 5V, wait for next HW spin for selectable power"
- /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
-#endif
-
- udelay(300000);
-
- /* reset the card */
- GPSR(52) = GPIO_bit(52);
-
- /* enable PCMCIA */
- GPCR(83) = GPIO_bit(83);
-
- /* clear reset */
- udelay(10);
- GPCR(52) = GPIO_bit(52);
-
- udelay(20000);
-}
-
-void pcmcia_power_off(void)
-{
- /* 0V */
- GPSR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- /* disable PCMCIA */
- GPSR(83) = GPIO_bit(83);
-}
diff --git a/board/adsvix/pxavoltage.S b/board/adsvix/pxavoltage.S
deleted file mode 100644
index 2fe1cab..0000000
--- a/board/adsvix/pxavoltage.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-
-#define LTC1663_ADDR 0x20
-
-#define LTC1663_SY 0x01 /* Sync ACK */
-#define LTC1663_SD 0x04 /* shutdown */
-#define LTC1663_BG 0x04 /* Internal Voltage Ref */
-
-#define VOLT_1_55 18 /* DAC value for 1.55V */
-
- .global initPXAvoltage
-
-@ Set the voltage to 1.55V early in the boot process so we can run
-@ at a high clock speed and boot quickly. Note that this is necessary
-@ because the reset button does not reset the CPU voltage, so if the
-@ voltage was low (say 0.85V) then the CPU would crash without this
-@ routine
-
-@ This routine clobbers r0-r4
-
-initializei2c:
-
- ldr r2, =CKEN
- ldr r3, [r2]
- orr r3, r3, #CKEN15_PWRI2C
- str r3, [r2]
-
- ldr r2, =PCFR
- ldr r3, [r2]
- orr r3, r3, #PCFR_PI2C_EN
- str r3, [r2]
-
- /* delay for about 250msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0000
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- ldr r0, =PWRICR
- ldr r1, [r0]
- bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP)
- str r1, [r0]
-
- orr r1, r1, #ICR_UR
- str r1, [r0]
-
- ldr r2, =PWRISR
- ldr r3, =0x7ff
- str r3, [r2]
-
- bic r1, r1, #ICR_UR
- str r1, [r0]
-
- mov r1, #(ICR_GCD | ICR_SCLE)
- str r1, [r0]
-
- orr r1, r1, #ICR_IUE
- str r1, [r0]
-
- orr r1, r1, #ICR_FM
- str r1, [r0]
-
- /* delay for about 1msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC00
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, lr
-
-sendbytei2c:
- ldr r3, =PWRIDBR
- str r0, [r3]
- ldr r3, =PWRICR
- ldr r0, [r3]
- orr r0, r0, r1
- bic r0, r0, r2
- str r0, [r3]
- orr r0, r0, #ICR_TB
- str r0, [r3]
-
- mov r2, #0x100000
-
-waitfortxemptyi2c:
-
- ldr r0, =PWRISR
- ldr r1, [r0]
-
- /* take it from the top if we don't get empty after a while */
- subs r2, r2, #1
- moveq lr, r4
- beq initPXAvoltage
-
- tst r1, #ISR_ITE
-
- beq waitfortxemptyi2c
-
- orr r1, r1, #ISR_ITE
- str r1, [r0]
-
- mov pc, lr
-
-initPXAvoltage:
-
- mov r4, lr
-
- bl setleds
-
- bl initializei2c
-
- bl setleds
-
- /* now send the real message to set the correct voltage */
- ldr r0, =LTC1663_ADDR
- mov r0, r0, LSL #1
- mov r1, #ICR_START
- ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK)
- bl sendbytei2c
-
- bl setleds
-
- mov r0, #LTC1663_BG
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- and r0, r0, #0xff
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- mov r0, r0, ASR #8
- and r0, r0, #0xff
- mov r1, #ICR_STOP
- mov r2, #ICR_START
- bl sendbytei2c
-
- bl setleds
-
- @ delay a little for the volatage to stablize
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, r4
-
-setleds:
- mov pc, lr
-
- ldr r5, =0x40e00058
- ldr r3, [r5]
- bic r3, r3, #0x3
- str r3, [r5]
- ldr r5, =0x40e0000c
- ldr r3, [r5]
- orr r3, r3, #0x00010000
- str r3, [r5]
-
- @ inner loop
- mov r0, #0x2
-1:
-
- ldr r5, =0x40e00018
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-2:
- subs r3, r3, #1
- bne 2b
-
- ldr r5, =0x40e00024
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-3:
- subs r3, r3, #1
- bne 3b
-
- subs r0, r0, #1
- bne 1b
-
- mov pc, lr
diff --git a/board/adsvix/u-boot.lds b/board/adsvix/u-boot.lds
deleted file mode 100644
index 14d264a..0000000
--- a/board/adsvix/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/pxa/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) }
- _end = .;
-}
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index f2c3e79..4ead533 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -81,7 +81,7 @@
unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
if (expected_size != actual_size)
- printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
return actual_size;
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 6371e2d..d284fc1 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -104,7 +104,7 @@
unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
if (expected_size != actual_size)
- printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
return actual_size;
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 12537f3..e2bfd4a 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -70,7 +70,7 @@
void flash_print_info(flash_info_t *info)
{
- printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+ printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
info->flash_id >> 16, info->flash_id & 0xffff);
printf("Size: %ld MB in %d sectors\n",
info->size >> 10, info->sector_count);
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
index dca10be..bda361e 100644
--- a/board/esd/common/flash.c
+++ b/board/esd/common/flash.c
@@ -22,7 +22,9 @@
*/
#include <common.h>
+#ifdef __PPC__
#include <ppc4xx.h>
+#endif
#include <asm/processor.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index f337a75..74c2528 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o mii.o
+COBJS = $(BOARD).o mii.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index f200810..0e4f5a2 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -2,6 +2,8 @@
* (C) Copyright 2002,2003, Motorola,Inc.
* Xianghua Xiao, X.Xiao@motorola.com.
*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,16 +28,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -62,17 +54,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +115,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +135,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index 5f4dcf0..1c583de 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,18 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index c66c69f..500e647 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
- drivers/bios_emulator/atibios.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -133,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -141,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index eba7e8a..6b93395 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -133,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -141,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index 5f4dcf0..a18b3a7 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,16 +25,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -61,18 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- drivers/net/tsec.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -134,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -142,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index cb30ea9..0e4f5a2 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -1,7 +1,9 @@
/*
- * (C) Copyright 2002,2003,Motorola,Inc.
+ * (C) Copyright 2002,2003, Motorola,Inc.
* Xianghua Xiao, X.Xiao@motorola.com.
*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,16 +28,6 @@
__DYNAMIC = 0; */
SECTIONS
{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFFFF000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -62,20 +54,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/commproc.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/serial_scc.o (.text)
- cpu/mpc85xx/ether_fcc.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/spd_sdram.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -137,6 +115,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -145,6 +135,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 1b83834..9d245e4 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,21 +23,8 @@
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
-
SECTIONS
{
- /* ELIOR - From RAM: From FLASH: 0xFFFFFFFC*/
- .resetvec 0xFFFFFFFC:
- {
- *(.resetvec)
- } = 0xffff
-
- /*(ELIOR - From RAM: From FLASH: 0xFFFFF000*/
- .bootpg 0xFFFFF000:
- {
- cpu/mpc85xx/start.o (.bootpg)
- } = 0xffff
-
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
@@ -64,17 +51,6 @@
.plt : { *(.plt) }
.text :
{
- cpu/mpc85xx/start.o (.text)
- cpu/mpc85xx/traps.o (.text)
- cpu/mpc85xx/interrupts.o (.text)
- cpu/mpc85xx/cpu_init.o (.text)
- cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/speed.o (.text)
- cpu/mpc85xx/pci.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
*(.text)
*(.fixup)
*(.got1)
@@ -136,6 +112,18 @@
. = ALIGN(256);
__init_end = .;
+ .bootpg ADDR(.text) + 0x7f000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ } = 0xffff
+
+ .resetvec ADDR(.text) + 0x7fffc :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
__bss_start = .;
.bss (NOLOAD) :
{
@@ -144,6 +132,8 @@
*(.bss)
*(COMMON)
}
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
index f130e6e..78a7028 100644
--- a/board/idmr/mii.c
+++ b/board/idmr/mii.c
@@ -200,7 +200,7 @@
}
#endif /* CFG_DISCOVER_PHY */
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 44fc79c..065014a 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -321,7 +321,7 @@
printf ("%4lu MB\n", totlen >>20);
}
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c
index b61e84e..5c71dec 100644
--- a/board/matrix_vision/mvbc_p/mvbc_p.c
+++ b/board/matrix_vision/mvbc_p/mvbc_p.c
@@ -32,6 +32,7 @@
#include <malloc.h>
#include <pci.h>
#include <i2c.h>
+#include <fpga.h>
#include <environment.h>
#include <fdt_support.h>
#include <asm/io.h>
@@ -109,7 +110,7 @@
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
printf("Ports : 0x%08x\n", gpio->port_config);
- printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
+ printf("PORCFG: 0x%08lx\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
out_be32(&gpio->simple_ddr, SIMPLE_DDR);
out_be32(&gpio->simple_dvo, SIMPLE_DVO);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index f1c2e58..ae3c245 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -464,7 +464,8 @@
if (lbc_mhz < 66) {
lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
- lbc->ltedr = 0xa4c80000; /* DK: !!! */
+ lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
+ LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
} else if (lbc_mhz >= 133) {
lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
diff --git a/board/w7o/post2.c b/board/w7o/post2.c
index e590128..6ee33eb 100644
--- a/board/w7o/post2.c
+++ b/board/w7o/post2.c
@@ -29,6 +29,12 @@
#include "errors.h"
#include "dtt.h"
+/* for LM75 DTT POST test */
+#define DTT_READ_TEMP 0x0
+#define DTT_CONFIG 0x1
+#define DTT_TEMP_HYST 0x2
+#define DTT_TEMP_SET 0x3
+
#if defined(CONFIG_RTC_M48T35A)
void rtctest(void)
{