doc: board: Convert i.MX6ULL EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst
index 046a839..313cf40 100644
--- a/doc/board/freescale/index.rst
+++ b/doc/board/freescale/index.rst
@@ -17,3 +17,4 @@
mx6sabreauto
mx6sabresd
mx6ul_14x14_evk
+ mx6ullevk
diff --git a/board/freescale/mx6ullevk/README b/doc/board/freescale/mx6ullevk.rst
similarity index 66%
rename from board/freescale/mx6ullevk/README
rename to doc/board/freescale/mx6ullevk.rst
index 47a35f6..a26248a 100644
--- a/board/freescale/mx6ullevk/README
+++ b/doc/board/freescale/mx6ullevk.rst
@@ -1,26 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+mx6ullevk
+=========
+
How to use U-Boot on Freescale MX6ULL 14x14 EVK
-----------------------------------------------
+-----------------------------------------------
- First make sure you have installed the dtc package (device tree compiler):
-$ sudo apt-get install device-tree-compiler
+.. code-block:: bash
+
+ $ sudo apt-get install device-tree-compiler
- Build U-Boot for MX6ULL 14x14 EVK:
-$ make mrproper
-$ make mx6ull_14x14_evk_defconfig
-$ make
+.. code-block:: bash
+
+ $ make mrproper
+ $ make mx6ull_14x14_evk_defconfig
+ $ make
This generates the u-boot-dtb.imx image in the current directory.
- Flash the u-boot-dtb.imx image into the micro SD card:
-$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
+.. code-block:: bash
-- Jumper settings:
+ $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync
+
+- Jumper settings::
-SW601: 0 0 1 0
-Sw602: 1 0
+ SW601: 0 0 1 0
+ Sw602: 1 0
Where 0 means bottom position and 1 means top position (from the switch label
numbers reference).