board: toradex: add verdin imx8m plus support
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB
IT V1.0B module. They are strapped to boot from eFuses which are factory
fused to properly boot from their on-module eMMC. U-Boot supports
booting from the on-module eMMC only, SDP support is disabled for now
due to missing i.MX 8M Plus USB support.
Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet both on-module eQoS and FEC (requires PHY on carrier board)
- GPIOs
- I2C
Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper
ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.
Boot:
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT: Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE: BL31: Built : 16:52:37, Aug 26 2021
U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM: 8 GiB
Core: 78 devices, 18 uclasses, devicetree: separate
WDT: Started watchdog@30280000 with servicing (60s timeout)
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net: Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot: 0
Verdin iMX8MP #
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
new file mode 100644
index 0000000..f8b4bf2
--- /dev/null
+++ b/include/configs/verdin-imx8mp.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2022 Toradex
+ */
+
+#ifndef __VERDIN_IMX8MP_H
+#define __VERDIN_IMX8MP_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#define CONFIG_SPL_MAX_SIZE (152 * 1024)
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK 0x960000
+#define CONFIG_SPL_BSS_START_ADDR 0x0098fc00
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x184000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#define CONFIG_POWER_PCA9450
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_REMAKE_ELF
+
+/* ENET Config */
+/* ENET1 */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_ETHPRIME "eth0" /* eqos is aliased on-module Ethernet interface */
+
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 7
+#define FEC_QUIRK_ENET_MAC
+
+#define PHY_ANEG_TIMEOUT 20000
+#endif /* CONFIG_CMD_NET */
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x43000000\0" \
+ "kernel_addr_r=0x40000000\0" \
+ "ramdisk_addr_r=0x46400000\0" \
+ "scriptaddr=0x46000000\0"
+
+/* Enable Distro Boot */
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef CONFIG_ISO_PARTITION
+#else
+#define BOOTENV
+#endif
+
+#if defined(CONFIG_TDX_EASY_INSTALLER)
+# define BOOT_SCRIPT "boot-tezi.scr"
+#else
+# define BOOT_SCRIPT "boot.scr"
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "bootcmd_mfg=fastboot 0\0" \
+ "boot_file=Image\0" \
+ "boot_scripts=" BOOT_SCRIPT "\0" \
+ "boot_script_dhcp=" BOOT_SCRIPT "\0" \
+ "console=ttymxc2\0" \
+ "fdt_board=dev\0" \
+ "initrd_addr=0x43800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+ "\0" \
+ "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
+ "tftp ${fdt_addr} verdin/${fdtfile}; " \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+ "consoleblank=0 earlycon\0" \
+ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
+ "if test \"$confirm\" = \"y\"; then " \
+ "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
+ "${blkcnt} / 0x200; mmc dev 2 1; mmc write ${loadaddr} 0x0 " \
+ "${blkcnt}; fi\0"
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
+
+/* i.MX 8M Plus supports max. 8GB memory in two albeit concecutive banks */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE (SZ_2G + SZ_1G)
+#define PHYS_SDRAM_2 0x100000000
+#define PHYS_SDRAM_2_SIZE (SZ_4G + SZ_1G)
+
+/* UART */
+#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE SZ_2K
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* USDHC */
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#endif /* __VERDIN_IMX8MP_H */