x86: Pass video settings from SPL to U-Boot proper
When video is set up in SPL, U-Boot proper needs to use the correct
parameters so it can write to the display.
Put these in a bloblist so they are available to U-Boot proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 228ab7f..bdfd1f0 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <bios_emul.h>
+#include <bloblist.h>
#include <bootstage.h>
#include <dm.h>
#include <errno.h>
@@ -34,6 +35,7 @@
#include <malloc.h>
#include <pci.h>
#include <pci_rom.h>
+#include <spl.h>
#include <vesa.h>
#include <video.h>
#include <acpi/acpi_s3.h>
@@ -374,34 +376,68 @@
printf("Not available (previous bootloader prevents it)\n");
return -EPERM;
}
- bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
- ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
- PCI_ROM_ALLOW_FALLBACK);
- bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
- if (ret) {
- debug("failed to run video BIOS: %d\n", ret);
- return ret;
- }
- ret = vesa_setup_video_priv(&mode_info.vesa,
- mode_info.vesa.phys_base_ptr, uc_priv,
- plat);
- if (ret) {
- if (ret == -ENFILE) {
- /*
- * See video-uclass.c for how to set up reserved memory
- * in your video driver
- */
- log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
- dev->driver->name);
+ /* In U-Boot proper, collect the information added by SPL (see below) */
+ if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL &&
+ CONFIG_IS_ENABLED(BLOBLIST)) {
+ struct video_handoff *ho;
+
+ ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho));
+ if (!ho)
+ return log_msg_ret("blf", -ENOENT);
+ plat->base = ho->fb;
+ plat->size = ho->size;
+ uc_priv->xsize = ho->xsize;
+ uc_priv->ysize = ho->ysize;
+ uc_priv->line_length = ho->line_length;
+ uc_priv->bpix = ho->bpix;
+ } else {
+ bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+ ret = dm_pci_run_vga_bios(dev, int15_handler,
+ PCI_ROM_USE_NATIVE |
+ PCI_ROM_ALLOW_FALLBACK);
+ bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+ if (ret) {
+ debug("failed to run video BIOS: %d\n", ret);
+ return ret;
}
- debug("No video mode configured\n");
- return ret;
+ ret = vesa_setup_video_priv(&mode_info.vesa,
+ mode_info.vesa.phys_base_ptr,
+ uc_priv, plat);
+ if (ret) {
+ if (ret == -ENFILE) {
+ /*
+ * See video-uclass.c for how to set up reserved
+ * memory in your video driver
+ */
+ log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
+ dev->driver->name);
+ }
+
+ debug("No video mode configured\n");
+ return ret;
+ }
}
printf("Video: %dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
mode_info.vesa.bits_per_pixel);
+ /* In SPL, store the information for use by U-Boot proper */
+ if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) {
+ struct video_handoff *ho;
+
+ ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0);
+ if (!ho)
+ return log_msg_ret("blc", -ENOMEM);
+
+ ho->fb = plat->base;
+ ho->size = plat->size;
+ ho->xsize = uc_priv->xsize;
+ ho->ysize = uc_priv->ysize;
+ ho->line_length = uc_priv->line_length;
+ ho->bpix = uc_priv->bpix;
+ }
+
return 0;
}