diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a2c0717..e7ccb53 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -347,6 +347,14 @@
 dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
 	at91-sama5d2_xplained.dtb
 
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb
+
 dtb-$(CONFIG_ARCH_BCM283X) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2835-rpi-a.dtb \
diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
new file mode 100644
index 0000000..84ee089
--- /dev/null
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -0,0 +1,1539 @@
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		u-boot,dm-pre-reloc;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			u-boot,dm-pre-reloc;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <10 12>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				status = "disabled";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+			};
+
+			aes@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+			};
+
+			tdes@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+			};
+
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl@fffff200 {
+				u-boot,dm-pre-reloc;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+				reg = <0xfffff200 0x100		/* pioA */
+				       0xfffff400 0x100		/* pioB */
+				       0xfffff600 0x100		/* pioC */
+				       0xfffff800 0x100		/* pioD */
+				       0xfffffa00 0x100		/* pioE */
+				       >;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					u-boot,dm-pre-reloc;
+					pinctrl_dbgu: dbgu-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB30 periph A */
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB31 periph A with pullup */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi0: spi0-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					u-boot,dm-pre-reloc;
+					pinctrl_spi1: spi1-0 {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD17 periph A */
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD18 periph A with pullup */
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB28 periph A */
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB29 periph A with pullup */
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE25 periph B, conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PE26 periph B with pullup, conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE18 periph B, conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PE19 periph B with pullup, conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioC_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioD_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioE_clk>;
+				u-boot,dm-pre-reloc;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				u-boot,dm-pre-reloc;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+				};
+
+				plla: pllack@0 {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <8000000 50000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+					u-boot,dm-pre-reloc;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: progck@0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: progck@1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: progck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck@2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck@4 {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck@6 {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck@7 {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck@8 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck@9 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck@10 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+					u-boot,dm-pre-reloc;
+
+					dbgu_clk: dbgu_clk@2 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					hsmc_clk: hsmc_clk@5 {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					pioA_clk: pioA_clk@6 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					pioB_clk: pioB_clk@7 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					pioC_clk: pioC_clk@8 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					pioD_clk: pioD_clk@9 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					pioE_clk: pioE_clk@10 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					usart0_clk: usart0_clk@12 {
+						#clock-cells = <0>;
+						reg = <12>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart1_clk: usart1_clk@13 {
+						#clock-cells = <0>;
+						reg = <13>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart2_clk: usart2_clk@14 {
+						#clock-cells = <0>;
+						reg = <14>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart3_clk: usart3_clk@15 {
+						#clock-cells = <0>;
+						reg = <15>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart0_clk: uart0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					twi0_clk: twi0_clk@18 {
+						reg = <18>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi1_clk: twi1_clk@19 {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi2_clk: twi2_clk@20 {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					mci0_clk: mci0_clk@21 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					mci1_clk: mci1_clk@22 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					spi0_clk: spi0_clk@24 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					spi1_clk: spi1_clk@25 {
+						u-boot,dm-pre-reloc;
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					tcb0_clk: tcb0_clk@26 {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					pwm_clk: pwm_clk@28 {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					adc_clk: adc_clk@29 {
+						#clock-cells = <0>;
+						reg = <29>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					dma0_clk: dma0_clk@30 {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					dma1_clk: dma1_clk@31 {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					uhphs_clk: uhphs_clk@32 {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					udphs_clk: udphs_clk@33 {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					isi_clk: isi_clk@37 {
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					ssc0_clk: ssc0_clk@38 {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					ssc1_clk: ssc1_clk@39 {
+						#clock-cells = <0>;
+						reg = <39>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					sha_clk: sha_clk@42 {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					aes_clk: aes_clk@43 {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					tdes_clk: tdes_clk@44 {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					trng_clk: trng_clk@45 {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					fuse_clk: fuse_clk@48 {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					mpddr_clk: mpddr_clk@49 {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
+				};
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown-controller@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0: endpoint@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1: endpoint@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2: endpoint@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3: endpoint@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep4: endpoint@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep5: endpoint@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep6: endpoint@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep7i: endpoint@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep8: endpoint@8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep9: endpoint@9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep10: endpoint@10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep11: endpoint@11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep12: endpoint@12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep13: endpoint@13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep14: endpoint@14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep15: endpoint@15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+		};
+
+		usb1: ohci@00600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@60000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <	0x60000000 0x01000000	/* EBI CS3 */
+				0xffffc070 0x00000490	/* SMC PMECC regs */
+				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
+				0x00110000 0x00018000	/* ROM code */
+				>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			status = "disabled";
+
+			nfc@70000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x70000000 0x08000000	/* NFC Command Registers */
+					0xffffc000 0x00000070	/* NFC HSMC regs */
+					0x00200000 0x00100000	/* NFC SRAM banks */
+					>;
+				clocks = <&hsmc_clk>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d31.dtsi b/arch/arm/dts/sama5d31.dtsi
new file mode 100644
index 0000000..883878b
--- /dev/null
+++ b/arch/arm/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/dts/sama5d31ek.dts b/arch/arm/dts/sama5d31ek.dts
new file mode 100644
index 0000000..988f865
--- /dev/null
+++ b/arch/arm/dts/sama5d31ek.dts
@@ -0,0 +1,56 @@
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sama5d33.dtsi b/arch/arm/dts/sama5d33.dtsi
new file mode 100644
index 0000000..4b4434a
--- /dev/null
+++ b/arch/arm/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/dts/sama5d33ek.dts b/arch/arm/dts/sama5d33ek.dts
new file mode 100644
index 0000000..a2aff7a
--- /dev/null
+++ b/arch/arm/dts/sama5d33ek.dts
@@ -0,0 +1,49 @@
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sama5d34.dtsi b/arch/arm/dts/sama5d34.dtsi
new file mode 100644
index 0000000..aa01573
--- /dev/null
+++ b/arch/arm/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/dts/sama5d34ek.dts b/arch/arm/dts/sama5d34ek.dts
new file mode 100644
index 0000000..556ba65
--- /dev/null
+++ b/arch/arm/dts/sama5d34ek.dts
@@ -0,0 +1,66 @@
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sama5d35.dtsi b/arch/arm/dts/sama5d35.dtsi
new file mode 100644
index 0000000..16c39f4
--- /dev/null
+++ b/arch/arm/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/dts/sama5d35ek.dts b/arch/arm/dts/sama5d35ek.dts
new file mode 100644
index 0000000..4e37cfdc
--- /dev/null
+++ b/arch/arm/dts/sama5d35ek.dts
@@ -0,0 +1,59 @@
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d36.dtsi b/arch/arm/dts/sama5d36.dtsi
new file mode 100644
index 0000000..e85139e
--- /dev/null
+++ b/arch/arm/dts/sama5d36.dtsi
@@ -0,0 +1,20 @@
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/dts/sama5d36ek.dts b/arch/arm/dts/sama5d36ek.dts
new file mode 100644
index 0000000..1fa7989
--- /dev/null
+++ b/arch/arm/dts/sama5d36ek.dts
@@ -0,0 +1,57 @@
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sama5d36ek_cmp.dts b/arch/arm/dts/sama5d36ek_cmp.dts
new file mode 100644
index 0000000..be41490
--- /dev/null
+++ b/arch/arm/dts/sama5d36ek_cmp.dts
@@ -0,0 +1,55 @@
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sama5d3_can.dtsi b/arch/arm/dts/sama5d3_can.dtsi
new file mode 100644
index 0000000..177f088
--- /dev/null
+++ b/arch/arm/dts/sama5d3_can.dtsi
@@ -0,0 +1,74 @@
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					can1_clk: can1_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_emac.dtsi b/arch/arm/dts/sama5d3_emac.dtsi
new file mode 100644
index 0000000..b654e50
--- /dev/null
+++ b/arch/arm/dts/sama5d3_emac.dtsi
@@ -0,0 +1,55 @@
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_gmac.dtsi b/arch/arm/dts/sama5d3_gmac.dtsi
new file mode 100644
index 0000000..81f6367
--- /dev/null
+++ b/arch/arm/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,88 @@
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_lcd.dtsi b/arch/arm/dts/sama5d3_lcd.dtsi
new file mode 100644
index 0000000..14d7c2b
--- /dev/null
+++ b/arch/arm/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,215 @@
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,sama5d3-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk@36 {
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+				};
+
+				systemck {
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_mci2.dtsi b/arch/arm/dts/sama5d3_mci2.dtsi
new file mode 100644
index 0000000..2d289ed
--- /dev/null
+++ b/arch/arm/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					mci2_clk: mci2_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&mci2_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_tcb1.dtsi b/arch/arm/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000..5be60b4
--- /dev/null
+++ b/arch/arm/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					tcb1_clk: tcb1_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3_uart.dtsi b/arch/arm/dts/sama5d3_uart.dtsi
new file mode 100644
index 0000000..6a547fd
--- /dev/null
+++ b/arch/arm/dts/sama5d3_uart.dtsi
@@ -0,0 +1,79 @@
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					uart0_clk: uart0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart1_clk: uart1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3xcm.dtsi b/arch/arm/dts/sama5d3xcm.dtsi
new file mode 100644
index 0000000..2cf9c36
--- /dev/null
+++ b/arch/arm/dts/sama5d3xcm.dtsi
@@ -0,0 +1,123 @@
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3xcm_cmp.dtsi b/arch/arm/dts/sama5d3xcm_cmp.dtsi
new file mode 100644
index 0000000..77638c3
--- /dev/null
+++ b/arch/arm/dts/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,166 @@
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3xdm.dtsi b/arch/arm/dts/sama5d3xdm.dtsi
new file mode 100644
index 0000000..035ab72
--- /dev/null
+++ b/arch/arm/dts/sama5d3xdm.dtsi
@@ -0,0 +1,41 @@
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sama5d3xmb.dtsi b/arch/arm/dts/sama5d3xmb.dtsi
new file mode 100644
index 0000000..f9ef905
--- /dev/null
+++ b/arch/arm/dts/sama5d3xmb.dtsi
@@ -0,0 +1,234 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+				u-boot,dm-pre-reloc;
+
+				spi_flash@0 {
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc0_cd: mmc0_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/sama5d3xmb_cmp.dtsi b/arch/arm/dts/sama5d3xmb_cmp.dtsi
new file mode 100644
index 0000000..77f989c
--- /dev/null
+++ b/arch/arm/dts/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,236 @@
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				spi_flash@0 {
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};