mx6: add boot device support for SPL
Add a common spl.c file to support boot device functions needed for SPL
such as detecting the boot device.
Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 0e71395..d4799e7 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -16,6 +16,7 @@
endif
ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
obj-y += misc.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6))
obj-$(CONFIG_CMD_SATA) += sata.o
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
new file mode 100644
index 0000000..9a02a64
--- /dev/null
+++ b/arch/arm/imx-common/spl.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/spl.h>
+#include <spl.h>
+
+#if defined(CONFIG_MX6)
+/* determine boot device from SRC_SBMR1 register (BOOT_CFG[4:1]) */
+u32 spl_boot_device(void)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned reg = readl(&psrc->sbmr1);
+
+ /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
+ switch ((reg & 0x000000FF) >> 4) {
+ /* EIM: See 8.5.1, Table 8-9 */
+ case 0x0:
+ /* BOOT_CFG1[3]: NOR/OneNAND Selection */
+ if ((reg & 0x00000008) >> 3)
+ return BOOT_DEVICE_ONENAND;
+ else
+ return BOOT_DEVICE_NOR;
+ break;
+ /* SATA: See 8.5.4, Table 8-20 */
+ case 0x2:
+ return BOOT_DEVICE_SATA;
+ /* Serial ROM: See 8.5.5.1, Table 8-22 */
+ case 0x3:
+ /* BOOT_CFG4[2:0] */
+ switch ((reg & 0x07000000) >> 24) {
+ case 0x0 ... 0x4:
+ return BOOT_DEVICE_SPI;
+ case 0x5 ... 0x7:
+ return BOOT_DEVICE_I2C;
+ }
+ break;
+ /* SD/eSD: 8.5.3, Table 8-15 */
+ case 0x4:
+ case 0x5:
+ return BOOT_DEVICE_MMC1;
+ /* MMC/eMMC: 8.5.3 */
+ case 0x6:
+ case 0x7:
+ return BOOT_DEVICE_MMC1;
+ /* NAND Flash: 8.5.2 */
+ case 0x8 ... 0xf:
+ return BOOT_DEVICE_NAND;
+ }
+ return BOOT_DEVICE_NONE;
+}
+#endif
+
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
+u32 spl_boot_mode(void)
+{
+ switch (spl_boot_device()) {
+ /* for MMC return either RAW or FAT mode */
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+#ifdef CONFIG_SPL_FAT_SUPPORT
+ return MMCSD_MODE_FAT;
+#else
+ return MMCSD_MODE_RAW;
+#endif
+ break;
+ default:
+ puts("spl: ERROR: unsupported device\n");
+ hang();
+ }
+}
+#endif