x86: acpi: Fix Windows S3 resume failure
U-Boot sets up the real mode interrupt handler stubs starting from
address 0x1000. In most cases, the first 640K (0x00000 - 0x9ffff)
system memory is reported as system RAM in E820 table to the OS.
(see install_e820_map() implementation for each platform). So OS
can use these memories whatever it wants.
If U-Boot is in an S3 resume path, care must be taken not to corrupt
these memorie otherwise OS data gets lost. Testing shows that, on
Microsoft Windows 10 on Intel Baytrail its wake up vector happens to
be installed at the same address 0x1000. While on Linux its wake up
vector does not overlap this memory range, but after resume kernel
checks low memory range per config option CONFIG_X86_RESERVE_LOW
which is 64K by default to see whether a memory corruption occurs
during the suspend/resume (it's harmless, but warnings are shown
in the kernel dmesg logs).
We cannot simply mark the these memory as reserved in E820 table
because such configuration makes GRUB complain: unable to allocate
real mode page. Hence we choose to back up these memories to the
place where we reserved on our stack for our S3 resume work.
Before jumping to OS wake up vector, we need restore the original
content there.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Roese <sr@denx.de>
diff --git a/arch/x86/lib/acpi_s3.c b/arch/x86/lib/acpi_s3.c
index 0b62b75..3175da8 100644
--- a/arch/x86/lib/acpi_s3.c
+++ b/arch/x86/lib/acpi_s3.c
@@ -9,6 +9,8 @@
#include <asm/acpi_table.h>
#include <asm/post.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void asmlinkage (*acpi_do_wakeup)(void *vector) = (void *)WAKEUP_BASE;
static void acpi_jump_to_wakeup(void *vector)
@@ -29,6 +31,52 @@
wake_vec = acpi_find_wakeup_vector(fadt);
+ /*
+ * Restore the memory content starting from address 0x1000 which is
+ * used for the real mode interrupt handler stubs.
+ */
+ memcpy((void *)0x1000, (const void *)gd->arch.backup_mem,
+ S3_RESERVE_SIZE);
+
post_code(POST_OS_RESUME);
acpi_jump_to_wakeup(wake_vec);
}
+
+int acpi_s3_reserve(void)
+{
+ /* adjust stack pointer for ACPI S3 resume backup memory */
+ gd->start_addr_sp -= S3_RESERVE_SIZE;
+ gd->arch.backup_mem = gd->start_addr_sp;
+
+ gd->start_addr_sp &= ~0xf;
+
+ /*
+ * U-Boot sets up the real mode interrupt handler stubs starting from
+ * address 0x1000. In most cases, the first 640K (0x00000 - 0x9ffff)
+ * system memory is reported as system RAM in E820 table to the OS.
+ * (see install_e820_map() implementation for each platform). So OS
+ * can use these memories whatever it wants.
+ *
+ * If U-Boot is in an S3 resume path, care must be taken not to corrupt
+ * these memorie otherwise OS data gets lost. Testing shows that, on
+ * Microsoft Windows 10 on Intel Baytrail its wake up vector happens to
+ * be installed at the same address 0x1000. While on Linux its wake up
+ * vector does not overlap this memory range, but after resume kernel
+ * checks low memory range per config option CONFIG_X86_RESERVE_LOW
+ * which is 64K by default to see whether a memory corruption occurs
+ * during the suspend/resume (it's harmless, but warnings are shown
+ * in the kernel dmesg logs).
+ *
+ * We cannot simply mark the these memory as reserved in E820 table
+ * because such configuration makes GRUB complain: unable to allocate
+ * real mode page. Hence we choose to back up these memories to the
+ * place where we reserved on our stack for our S3 resume work.
+ * Before jumping to OS wake up vector, we need restore the original
+ * content there (see acpi_resume() above).
+ */
+ if (gd->arch.prev_sleep_state == ACPI_S3)
+ memcpy((void *)gd->arch.backup_mem, (const void *)0x1000,
+ S3_RESERVE_SIZE);
+
+ return 0;
+}