diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a15ecd4..42def7a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -431,6 +431,7 @@
 	zynqmp-sck-kv-g-revB.dtbo		\
 	zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb	\
 	zynqmp-vpk120-revA.dtb			\
+	zynqmp-vp-x-a2785-00-revA.dtb		\
 	zynqmp-zcu100-revC.dtb			\
 	zynqmp-zcu102-revA.dtb			\
 	zynqmp-zcu102-revB.dtb			\
diff --git a/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts
new file mode 100644
index 0000000..2f88aa4
--- /dev/null
+++ b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP vp-x-a2785-00 RevA System Controller
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP System Controller on vp-x-a2785-00 board RevA";
+	compatible = "xlnx,zynqmp-vp-x-a2785-00-revA",
+		     "xlnx,zynqmp-vp-x-a2785-00", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		nvmem0 = &eeprom;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		j383 {
+			label = "j383";
+			gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led { /* ds52 */
+			label = "heartbeat";
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	si5332_0: si5332_0 { /* ps_ref_clk - u142 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	si5332_1: si5332_1 { /* clk0_sgmii - u142 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>; /* FIXME */
+	};
+
+	si5332_2: si5332_2 { /* clk1_usb - u142 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&qspi { /* MIO 0-5 */
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* u285 - mt25qu512abb8e12 512Mib */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <4>; /* maybe 4 here */
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		partition@0 { /* for testing purpose */
+			label = "qspi";
+			reg = <0 0x4000000>;
+		};
+	};
+};
+
+&sdhci1 { /* sd MIO 45-51 */
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 { /* uart0 MIO38-39 */
+	status = "okay";
+	bootph-all;
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii"; /* DTG generates this properly 1512 */
+	is-internal-pcspma;
+	/* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */
+	/* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+	phy0: ethernet-phy@0 { /* u131 - M88e1512 */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+		  "QSPI_CS_B", "", "", "SYSCTLR_GPIO", "SYSCTLR_LED", /* 5 - 9 */
+		  "SYSCTLR_PB", "PMC_ZU4_TRIGGER", "", "", "", /* 10 - 14 */
+		  "", "", "", "", "", /* 15 - 19 */
+		  "", "", "", "", "", /* 20 - 24 */
+		  "", "", "", "", "", /* 25 - 29 */
+		  "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+		  "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+		  "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+		  "SD1_CD", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+		  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+		  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+		  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
+		  "", "", "", "", "", /* 65 - 69 */
+		  "", "", "", "", "", /* 70 - 74 */
+		  "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+		  "", "", /* 78 - 79 */
+		  "", "", "", "", "", /* 80 - 84 */
+		  "", "", "", "", "", /* 85 - 89 */
+		  "", "", "", "", "", /* 90 - 94 */
+		  "", "", "", "", "", /* 95 - 99 */
+		  "", "", "", "", "", /* 100 - 104 */
+		  "", "", "", "", "", /* 105 - 109 */
+		  "", "", "", "", "", /* 110 - 114 */
+		  "", "", "", "", "", /* 115 - 119 */
+		  "", "", "", "", "", /* 120 - 124 */
+		  "", "", "", "", "", /* 125 - 129 */
+		  "", "", "", "", "", /* 130 - 134 */
+		  "", "", "", "", "", /* 135 - 139 */
+		  "", "", "", "", "", /* 140 - 144 */
+		  "", "", "", "", "", /* 145 - 149 */
+		  "", "", "", "", "", /* 150 - 154 */
+		  "", "", "", "", "", /* 155 - 159 */
+		  "", "", "", "", "", /* 160 - 164 */
+		  "", "", "", "", "", /* 165 - 169 */
+		  "", "", "", ""; /* 170 - 173 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u233: gpio@20 { /* u233 */ /* FIXME - address maybe wrong */
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "", "", /* 0 - 3 */
+				  "", "", "", "MAX6643_FULL_SPEED", /* 4 - 7 */
+				  "", "", "", "VCCINT_FAULT_B", /* 10 - 13 */
+				  "VCCINT_VRHOT_B", "", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+	};
+
+	i2c-mux@74 { /* u33 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+		pmbus_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* On connector J325 */
+			reg_vccint: tps53681@60 { /* u266 - 0xc0 */
+				compatible = "ti,tps53681", "ti,tps53679";
+				reg = <0x60>;
+			};
+			reg_vcc1v1_lp4: tps544@d { /* u85 */
+				compatible = "ti,tps544b25";
+				reg = <0xd>;
+			};
+			reg_mgtyavcc: tps544@10 { /* u274 */
+				compatible = "ti,tps544b25";
+				reg = <0x10>;
+			};
+			reg_mgtyavtt: tps544@11 { /* u275 */
+				compatible = "ti,tps544b25";
+				reg = <0x11>;
+			};
+			reg_vccaux: tps544@12 { /* u276 */
+				compatible = "ti,tps544b25";
+				reg = <0x12>;
+			};
+			reg_vcc_cpm: tps544@14 { /* u272 */
+				compatible = "ti,tps544b25";
+				reg = <0x14>;
+			};
+			reg_util_3v3: tps544@1d { /* u278 */
+				compatible = "ti,tps544b25";
+				reg = <0x1d>;
+			};
+		};
+		pmbus1_ina226_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* FIXME check alerts coming to SC */
+			vcc_cpm: ina226@44 { /* u273 */
+				compatible = "ti,ina226";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+		};
+		i2c@2 { /* NC */ /* FIXME maybe remove */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		pcie_smbus: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		pcie2_smbus: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c@5 { /* NC */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		user_si570: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+		/* 7 unused */
+	};
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	i2c-mux@74 { /* u35 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+		dc_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* Use for storing information about SC board */
+			eeprom: eeprom@54 { /* u34 - m24128 16kB */
+				compatible = "st,24c128", "atmel,24c128";
+				reg = <0x54>; /* & 0x5c */
+			};
+			si570_ref_clk: clock-generator@5d { /* u32 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <33333333>;
+				clock-frequency = <33333333>;
+				clock-output-names = "ref_clk";
+				silabs,skip-recall;
+			};
+		};
+		i2c@1 { /* NC - FIXME */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c@2 { /* NC - FIXME */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c@3 { /* NC - FIXME */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		lpddr4_si570_clk2_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			lpddr4_clk2: clock-generator@60 { /* u3 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "lpddr4_clk2";
+			};
+		};
+		lpddr4_si570_clk1_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			lpddr4_clk1: clock-generator@60 { /* u248 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x60>;
+				temperature-stability = <50>;
+				factory-fout = <200000000>;
+				clock-frequency = <200000000>;
+				clock-output-names = "lpddr4_clk1";
+			};
+		};
+		/* 6-7 unused */
+	};
+};
+
+&usb0 { /* MIO52 - MIO63 */
+	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
+};
+
+&psgtr {
+	status = "okay";
+	/* sgmii, usb3 */
+	clocks = <&si5332_1>, <&si5332_2>;
+	clock-names = "ref0", "ref1";
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	maximum-speed = "super-speed";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_8_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_8_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_34_grp", "gpio0_35_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_34_grp", "gpio0_35_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_9_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_9_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};