tegra2: spi: Support SPI / UART switch
Add the SPI / UART switch logic into the Tegra2 SPI driver so that it
can co-exist with the NS16550 UART.
We need the ns16550.h header for NS16550_t for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/drivers/spi/tegra2_spi.c b/drivers/spi/tegra2_spi.c
index fdcad09..56cb229 100644
--- a/drivers/spi/tegra2_spi.c
+++ b/drivers/spi/tegra2_spi.c
@@ -28,9 +28,11 @@
#include <spi.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <ns16550.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/uart-spi-switch.h>
#include <asm/arch/tegra2_spi.h>
struct tegra_spi_slave {
@@ -128,6 +130,16 @@
*/
pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
pinmux_tristate_disable(PINGRP_LSPI);
+
+#ifndef CONFIG_SPI_UART_SWITCH
+ /*
+ * NOTE:
+ * Only set PinMux bits 3:2 to SPI here on boards that don't have the
+ * SPI UART switch or subsequent UART data won't go out! See
+ * spi_uart_switch().
+ */
+ /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
+#endif
return 0;
}
@@ -145,6 +157,8 @@
{
struct tegra_spi_slave *spi = to_tegra_spi(slave);
+ pinmux_select_spi();
+
/* CS is negated on Tegra, so drive a 1 to get a 0 */
setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
}