fsl-lsch3: soc: Enable AHB read support for Flexspi controller
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 0de840a..ab1e3fb 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -397,6 +397,15 @@
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config FSPI_AHB_EN_4BYTE
+ bool "Enable 4-byte Fast Read command for AHB mode"
+ default n
+ help
+ The default setting for FlexSPI AHB bus just supports 3-byte addressing.
+ But some FlexSPI flash sizes are up to 64MBytes.
+ This flag enables fast read command for AHB mode and modifies required
+ LUT to support full FlexSPI flash.
+
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 4b193c6..578f8d1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -686,6 +686,47 @@
}
#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+int fspi_ahb_init(void)
+{
+ /* Enable 4bytes address support and fast read */
+ u32 *fspi_lut, lut_key, *fspi_key;
+
+ fspi_key = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUTKEY_BASE_ADDR;
+ fspi_lut = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUT_BASE_ADDR;
+
+ lut_key = in_be32(fspi_key);
+
+ if (lut_key == SYS_NXP_FSPI_LUTKEY) {
+ /* That means the register is BE */
+ out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ /* Unlock the lut table */
+ out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+ /* Create READ LUT */
+ out_be32(fspi_lut, 0x0820040c);
+ out_be32(fspi_lut + 1, 0x24003008);
+ out_be32(fspi_lut + 2, 0x00000000);
+ /* Lock the lut table */
+ out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+ } else {
+ /* That means the register is LE */
+ out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ /* Unlock the lut table */
+ out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+ /* Create READ LUT */
+ out_le32(fspi_lut, 0x0820040c);
+ out_le32(fspi_lut + 1, 0x24003008);
+ out_le32(fspi_lut + 2, 0x00000000);
+ /* Lock the lut table */
+ out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+ }
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_QSPI_AHB_INIT
/* Enable 4bytes address support and fast read */
int qspi_ahb_init(void)
@@ -878,6 +919,9 @@
#ifdef CONFIG_QSPI_AHB_INIT
qspi_ahb_init();
#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+ fspi_ahb_init();
+#endif
return fsl_board_late_init();
}