Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
new file mode 100644
index 0000000..09b23ee
--- /dev/null
+++ b/cpu/mpc8220/cpu_init.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ */
+void cpu_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
+ volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
+ volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* Clear all port configuration */
+ portcfg->pcfg0 = 0;
+ portcfg->pcfg1 = 0;
+ portcfg->pcfg2 = 0;
+ portcfg->pcfg3 = 0;
+
+ /*
+ * Flexbus Controller: configure chip selects and enable them
+ */
+#if defined (CFG_CS0_BASE)
+ flexbus->csar0 = CFG_CS0_BASE;
+ flexbus->cscr0 = CFG_CS0_CTRL;
+ flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CFG_CS1_BASE)
+ flexbus->csar1 = CFG_CS1_BASE;
+ flexbus->cscr1 = CFG_CS1_CTRL;
+ flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CFG_CS2_BASE)
+ flexbus->csar2 = CFG_CS2_BASE;
+ flexbus->cscr2 = CFG_CS2_CTRL;
+ flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CFG_CS3_BASE)
+ flexbus->csar3 = CFG_CS3_BASE;
+ flexbus->cscr3 = CFG_CS3_CTRL;
+ flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CFG_CS4_BASE)
+ flexbus->csar4 = CFG_CS4_BASE;
+ flexbus->cscr4 = CFG_CS4_CTRL;
+ flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CFG_CS5_BASE)
+ flexbus->csar5 = CFG_CS5_BASE;
+ flexbus->cscr5 = CFG_CS5_CTRL;
+ flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+
+ /* This section of the code cannot place in cpu_init_r(),
+ it will cause the system to hang */
+ /* enable timebase */
+ xlbarb->config = 0x00002000;
+
+ xlbarb->addrTenTimeOut = 0x1000;
+ xlbarb->dataTenTimeOut = 0x1000;
+ xlbarb->busActTimeOut = 0x2000;
+
+ /* Master Priority Enable */
+ xlbarb->mastPriEn = 0x1f;
+ xlbarb->mastPriority = 0;
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+ /* this may belongs to disable interrupt section */
+ /* mask all interrupts */
+ *(vu_long *) 0xf0000700 = 0xfffffc00;
+ *(vu_long *) 0xf0000714 |= 0x0001ffff;
+ *(vu_long *) 0xf0000710 &= ~0x00000f00;
+
+ /* route critical ints to normal ints */
+ *(vu_long *) 0xf0000710 |= 0x00000001;
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
+ /* load FEC microcode */
+ loadtask (0, 2);
+#endif
+ return (0);
+}