| CONFIG_ARM=y |
| CONFIG_ARCH_OMAP2PLUS=y |
| CONFIG_TEXT_BASE=0x80100000 |
| CONFIG_SYS_MALLOC_LEN=0x1000000 |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" |
| CONFIG_AM33XX=y |
| CONFIG_SYS_MPUCLK=300 |
| CONFIG_TARGET_RASTABAN=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_BOOTCOUNT_BOOTLIMIT=3 |
| CONFIG_SPL=y |
| CONFIG_ENV_OFFSET_REDUND=0x2E0000 |
| CONFIG_SPL_FS_FAT=y |
| CONFIG_SPL_LIBDISK_SUPPORT=y |
| CONFIG_SYS_LOAD_ADDR=0x81000000 |
| CONFIG_ENV_VARS_UBOOT_CONFIG=y |
| CONFIG_BOOTDELAY=3 |
| CONFIG_AUTOBOOT_KEYED=y |
| CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" |
| CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" |
| CONFIG_BOOT_RETRY=y |
| CONFIG_BOOT_RETRY_TIME=60 |
| CONFIG_RESET_TO_RETRY=y |
| CONFIG_USE_PREBOOT=y |
| CONFIG_SYS_PBSIZE=1049 |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_SPL_BSS_START_ADDR=0x80000000 |
| CONFIG_SPL_SYS_MALLOC=y |
| CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y |
| CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 |
| # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set |
| CONFIG_SPL_I2C=y |
| CONFIG_SPL_NAND_DRIVERS=y |
| CONFIG_SPL_NAND_ECC=y |
| CONFIG_SPL_NAND_BASE=y |
| CONFIG_SPL_WATCHDOG=y |
| CONFIG_SPL_YMODEM_SUPPORT=y |
| # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_PROMPT="U-Boot# " |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_CMD_ASKENV=y |
| CONFIG_CMD_DFU=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_BOOTP_DNS2=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_TIME=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),512k(u-boot.env0),512k(u-boot.env1),300m(rootfs),512k(mtdoops),-(configuration)" |
| CONFIG_CMD_UBI=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_OF_EMBED=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_ENV_RANGE=0x80000 |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_NET_RETRY_COUNT=10 |
| CONFIG_BOOTP_SEND_HOSTNAME=y |
| CONFIG_USE_ROOTPATH=y |
| CONFIG_ROOTPATH="/opt/eldk" |
| CONFIG_SPL_DM=y |
| # CONFIG_SPL_BLK is not set |
| CONFIG_BOOTCOUNT_LIMIT=y |
| CONFIG_BOOTCOUNT_ENV=y |
| CONFIG_CLK=y |
| CONFIG_CLK_TI_CTRL=y |
| CONFIG_DFU_NAND=y |
| CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 |
| CONFIG_DM_I2C=y |
| # CONFIG_SPL_DM_I2C is not set |
| CONFIG_SPL_SYS_I2C_LEGACY=y |
| CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 |
| CONFIG_SYS_NAND_ONFI_DETECTION=y |
| CONFIG_SYS_NAND_PAGE_SIZE=0x800 |
| CONFIG_SYS_NAND_OOBSIZE=0x40 |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 |
| CONFIG_MTD_UBI_FASTMAP=y |
| CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 |
| CONFIG_PHY_SMSC=y |
| CONFIG_DRIVER_TI_CPSW=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_OMAP3_SPI=y |
| CONFIG_USB=y |
| # CONFIG_SPL_DM_USB is not set |
| CONFIG_USB_MUSB_HOST=y |
| CONFIG_USB_MUSB_GADGET=y |
| CONFIG_USB_MUSB_DSPS=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" |
| CONFIG_USB_GADGET_VENDOR_NUM=0x0908 |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 |
| CONFIG_USB_GADGET_DOWNLOAD=y |
| CONFIG_USB_ETHER=y |
| CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" |