diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S
new file mode 100644
index 0000000..a023353
--- /dev/null
+++ b/board/mpl/vcma9/lowlevel_init.S
@@ -0,0 +1,212 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+#define BWSCON		0x48000000
+#define PLD_BASE	0x2C000000
+#define SDRAM_REG	0x2C000106
+
+/* BWSCON */
+#define DW8		 	(0x0)
+#define DW16		 	(0x1)
+#define DW32		 	(0x2)
+#define WAIT		 	(0x1<<2)
+#define UBLB		 	(0x1<<3)
+
+/* BANKSIZE */
+#define BURST_EN		(0x1<<7)
+
+#define B1_BWSCON	  	(DW16)
+#define B2_BWSCON	  	(DW32)
+#define B3_BWSCON	  	(DW32)
+#define B4_BWSCON	  	(DW16 + WAIT + UBLB)
+#define B5_BWSCON	  	(DW8 + UBLB)
+#define B6_BWSCON	  	(DW32)
+#define B7_BWSCON	  	(DW32)
+
+/* BANK0CON */
+#define B0_Tacs		 	0x0	/*  0clk */
+#define B0_Tcos		 	0x1	/*  1clk */
+/*#define B0_Tcos		0x0	  0clk */
+#define B0_Tacc		 	0x7	/*  14clk */
+/*#define B0_Tacc		0x5	  8clk */
+#define B0_Tcoh		 	0x0	/*  0clk */
+#define B0_Tah		 	0x0	/*  0clk */
+#define B0_Tacp		 	0x0     /* page mode is not used */
+#define B0_PMC		 	0x0	/* page mode disabled */
+
+/* BANK1CON */
+#define B1_Tacs		 	0x0	/*  0clk */
+#define B1_Tcos		 	0x1	/*  1clk */
+/*#define B1_Tcos		0x0	  0clk */
+#define B1_Tacc			0x7	/*  14clk */
+/*#define B1_Tacc		0x5	  8clk */
+#define B1_Tcoh		 	0x0	/*  0clk */
+#define B1_Tah		 	0x0	/*  0clk */
+#define B1_Tacp		 	0x0     /* page mode is not used */
+#define B1_PMC		 	0x0	/* page mode disabled */
+
+#define B2_Tacs		 	0x3	/*  4clk */
+#define B2_Tcos		 	0x3	/*  4clk */
+#define B2_Tacc		 	0x7     /* 14clk */
+#define B2_Tcoh		 	0x3	/*  4clk */
+#define B2_Tah		 	0x3	/*  4clk */
+#define B2_Tacp		 	0x0	/* page mode is not used */
+#define B2_PMC		 	0x0     /* page mode disabled */
+
+#define B3_Tacs		 	0x3	/*  4clk */
+#define B3_Tcos		 	0x3	/*  4clk */
+#define B3_Tacc		 	0x7     /* 14clk */
+#define B3_Tcoh		 	0x3	/*  4clk */
+#define B3_Tah		 	0x3	/*  4clk */
+#define B3_Tacp		 	0x0	/* page mode is not used */
+#define B3_PMC		 	0x0     /* page mode disabled */
+
+#define B4_Tacs		 	0x3	/*  4clk */
+#define B4_Tcos		 	0x1	/*  1clk */
+#define B4_Tacc		 	0x7	/* 14clk */
+#define B4_Tcoh		 	0x1	/*  1clk */
+#define B4_Tah		 	0x0	/*  0clk */
+#define B4_Tacp		 	0x0     /* page mode is not used */
+#define B4_PMC		 	0x0	/* page mode disabled */
+
+#define B5_Tacs		 	0x0	/*  0clk */
+#define B5_Tcos		 	0x3	/*  4clk */
+#define B5_Tacc		 	0x5	/*  8clk */
+#define B5_Tcoh		 	0x2	/*  2clk */
+#define B5_Tah		 	0x1	/*  1clk */
+#define B5_Tacp		 	0x0     /* page mode is not used */
+#define B5_PMC		 	0x0	/* page mode disabled */
+
+#define B6_MT		 	0x3	/* SDRAM */
+#define B6_Trcd	 	 	0x1	/* 3clk */
+#define B6_SCAN		 	0x2	/* 10bit */
+
+#define B7_MT		 	0x3	/* SDRAM */
+#define B7_Trcd		 	0x1	/* 3clk */
+#define B7_SCAN		 	0x2	/* 10bit */
+
+/* REFRESH parameter */
+#define REFEN		 	0x1	/* Refresh enable */
+#define TREFMD		 	0x0	/* CBR(CAS before RAS)/Auto refresh */
+#define Trp		 	0x0	/* 2clk */
+#define Trc		 	0x3	/* 7clk */
+#define Tchr		 	0x2	/* 3clk */
+#define REFCNT		 	1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
+/**************************************/
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl lowlevel_init
+lowlevel_init:
+	/* memory control configuration */
+	/* make r0 relative the current location so that it */
+	/* reads SMRDATA out of FLASH rather than memory ! */
+	ldr     r0, =CSDATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
+	add     r2, r0, #CSDATA_END-CSDATA
+0:
+	ldr     r3, [r0], #4
+	str     r3, [r1], #4
+	cmp     r2, r0
+	bne     0b
+
+	/* PLD access is now possible */
+	/* r0 == SDRAMDATA */
+	/* r1 == SDRAM controller regs */
+	ldr	r2, =PLD_BASE
+	ldrb	r3, [r2, #SDRAM_REG-PLD_BASE]
+	mov	r4, #SDRAMDATA1_END-SDRAMDATA
+	/* calculate start and end point */
+	mla	r0, r3, r4, r0
+	add     r2, r0, r4
+0:
+	ldr     r3, [r0], #4
+	str     r3, [r1], #4
+	cmp     r2, r0
+	bne     0b
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+/* the literal pools origin */
+
+CSDATA:
+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
+CSDATA_END:
+
+SDRAMDATA:
+/* 4Mx8x4 */
+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+    .word 0x32 + BURST_EN
+    .word 0x30
+    .word 0x30
+SDRAMDATA1_END:
+
+/* 8Mx8x4 (not implemented yet) */
+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+    .word 0x32 + BURST_EN
+    .word 0x30
+    .word 0x30
+
+/* 2Mx8x4 (not implemented yet) */
+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+    .word 0x32 + BURST_EN
+    .word 0x30
+    .word 0x30
+
+/* 4Mx8x2 (not implemented yet) */
+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+    .word 0x32 + BURST_EN
+    .word 0x30
+    .word 0x30