sunxi: Add i2c support
Add support for the i2c controller found on all Allwinner sunxi SoCs,
this is the same controller as found on the Marvell orion5x and kirkwood
SoC families, with a slightly different register layout, so this patch uses
the existing mvtwsi code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Heiko Schocher <hs@denx.de>
[ ijc -- updated u-boot-spl-fel.lds ]
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 538ffa7..701f919 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -11,6 +11,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <netdev.h>
#include <miiphy.h>
#include <serial.h>
@@ -93,11 +94,16 @@
clock_init();
timer_init();
gpio_init();
+ i2c_init_board();
#ifdef CONFIG_SPL_BUILD
gd = &gdata;
preloader_console_init();
+#ifdef CONFIG_SPL_I2C_SUPPORT
+ /* Needed early by sunxi_board_init if PMU is enabled */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
sunxi_board_init();
#endif
}
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
index 364e35c..928b7c1 100644
--- a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
@@ -27,6 +27,11 @@
}
. = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(4);
. = .;
. = ALIGN(4);
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
index c1ae227..53f0cbd 100644
--- a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
@@ -39,6 +39,11 @@
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } > .sram
+
+ . = ALIGN(4);
__image_copy_end = .;
_end = .;
diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
new file mode 100644
index 0000000..dc5406b
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _SUNXI_I2C_H_
+#define _SUNXI_I2C_H_
+
+#include <asm/arch/cpu.h>
+
+#define CONFIG_I2C_MVTWSI_BASE SUNXI_TWI0_BASE
+/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
+#define CONFIG_SYS_TCLK 24000000
+
+#endif
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b05d0b9..543b809 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -106,6 +106,13 @@
}
#endif
+void i2c_init_board(void)
+{
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
+ clock_twi_onoff(0, 1);
+}
+
#ifdef CONFIG_SPL_BUILD
void sunxi_board_init(void)
{
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index c8b5425..ab3ffa0 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -22,6 +22,8 @@
#include <asm/arch/orion5x.h>
#elif defined(CONFIG_KIRKWOOD)
#include <asm/arch/kirkwood.h>
+#elif defined(CONFIG_SUNXI)
+#include <asm/arch/i2c.h>
#else
#error Driver mvtwsi not supported by SoC or board
#endif
@@ -30,10 +32,24 @@
* TWSI register structure
*/
+#ifdef CONFIG_SUNXI
+
struct mvtwsi_registers {
u32 slave_address;
+ u32 xtnd_slave_addr;
u32 data;
u32 control;
+ u32 status;
+ u32 baudrate;
+ u32 soft_reset;
+};
+
+#else
+
+struct mvtwsi_registers {
+ u32 slave_address;
+ u32 data;
+ u32 control;
union {
u32 status; /* when reading */
u32 baudrate; /* when writing */
@@ -43,6 +59,8 @@
u32 soft_reset;
};
+#endif
+
/*
* Control register fields
*/
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 3f04890..42b0d2e 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -161,6 +161,14 @@
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
+/* I2C */
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_CMD_I2C
+
#ifndef CONFIG_CONS_INDEX
#define CONFIG_CONS_INDEX 1 /* UART0 */
#endif