ARM: dts: stm32: Add STM32F429 Evaluation board support
This DT file comes from kernel v4.15, this board offers :
_ STM32F429NIH6 microcontroller
_ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels)
_ Six 5 V power supply options:
Power jack
ST-LINK/V2 USB connector
User USB HS connector
User USB FS1 connector
User USB FS2 connector
Daughterboard
_ SAI Audio DAC, stereo audio jack which supports headset with
microphone
_ Stereo digital microphone, audio terminal connector used to connect
external speakers
_ 2 GBytes (or more) SDIO interface MicroSD card
_ RF EEPROM on I2 C compatible serial interface
_ RS-232 communication
_ IrDA transceiver
_ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded
_ IEEE-802.3-2002 compliant Ethernet connector
_ Camera module
_ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash
_ Joystick with 4-directional control and selector
_ Reset, Wakeup and Tamper buttons
_ 4 color user LEDs
_ Extension connectors & memory connectors for daughterboard or
wrapping board
_ USB OTG HS and FS with Micro-AB connectors
_ RTC with backup battery
_ CAN2.0A/B compliant connection
_ Potentiometer
_ Motor control connector
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts
new file mode 100644
index 0000000..362ea42
--- /dev/null
+++ b/arch/arm/dts/stm32429i-eval.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "STMicroelectronics STM32429i-EVAL board";
+ compatible = "st,stm32429i-eval", "st,stm32f429";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+
+ clocks {
+ clk_ext_camera: clk-ext-camera {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ dma-ranges = <0xc0000000 0x0 0x10000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_vref: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&gpiog 6 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ orange {
+ gpios = <&gpiog 7 1>;
+ };
+ red {
+ gpios = <&gpiog 10 1>;
+ };
+ blue {
+ gpios = <&gpiog 12 1>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@0 {
+ label = "Wake up";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioa 0 0>;
+ };
+ button@1 {
+ label = "Tamper";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioc 13 0>;
+ };
+ };
+
+ usbotg_hs_phy: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+ clock-names = "main_clk";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "ampire,am-480272h3tmqw-t01h";
+ status = "okay";
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+
+ mmc_vcard: mmc_vcard {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_vcard";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc3_in8_pin>;
+ vref-supply = <®_vref>;
+ status = "okay";
+ adc3: adc@200 {
+ st,adc-channels = <8>;
+ status = "okay";
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&crc {
+ status = "okay";
+};
+
+&dcmi {
+ status = "okay";
+
+ port {
+ dcmi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov2640: camera@30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+ pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+ clocks = <&clk_ext_camera>;
+ clock-names = "xvclk";
+ status = "okay";
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&dcmi_0>;
+ };
+ };
+ };
+
+ stmpe1600: stmpe1600@42 {
+ compatible = "st,stmpe1600";
+ reg = <0x42>;
+ interrupts = <8 3>;
+ interrupt-parent = <&gpioi>;
+ interrupt-controller;
+ wakeup-source;
+
+ stmpegpio: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
+
+&iwdg {
+ status = "okay";
+ timeout-sec = <32>;
+};
+
+<dc {
+ status = "okay";
+ pinctrl-0 = <<dc_pins>;
+ pinctrl-names = "default";
+ dma-ranges;
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-0 = <ðernet_mii>;
+ pinctrl-names = "default";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdio {
+ status = "okay";
+ vmmc-supply = <&mmc_vcard>;
+ cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ pinctrl-names = "default", "opendrain";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_pins_od>;
+ bus-width = <4>;
+};
+
+&timers1 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@2 {
+ status = "okay";
+ };
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};