sunxi: switch Allwinner A10 boards to OF_UPSTREAM
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10 SoCs (sun4i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A10 related .dts and .dtsi files, and switch
most of sun4i boards over to use OF_UPSTREAM.
There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f490031..55eb9d0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -531,30 +531,8 @@
stm32h750i-art-pi.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
- sun4i-a10-a1000.dtb \
- sun4i-a10-ba10-tvbox.dtb \
- sun4i-a10-chuwi-v7-cw0825.dtb \
- sun4i-a10-cubieboard.dtb \
- sun4i-a10-dserve-dsrv9703c.dtb \
- sun4i-a10-gemei-g9.dtb \
- sun4i-a10-hackberry.dtb \
- sun4i-a10-hyundai-a7hd.dtb \
- sun4i-a10-inet1.dtb \
sun4i-a10-inet-3f.dtb \
- sun4i-a10-inet-3w.dtb \
- sun4i-a10-inet97fv2.dtb \
- sun4i-a10-inet9f-rev03.dtb \
- sun4i-a10-itead-iteaduino-plus.dtb \
- sun4i-a10-jesurun-q5.dtb \
- sun4i-a10-marsboard.dtb \
- sun4i-a10-mini-xplus.dtb \
- sun4i-a10-mk802.dtb \
- sun4i-a10-mk802ii.dtb \
- sun4i-a10-olinuxino-lime.dtb \
- sun4i-a10-pcduino.dtb \
- sun4i-a10-pcduino2.dtb \
- sun4i-a10-pov-protab2-ips9.dtb \
- sun4i-a10-topwise-a721.dtb
+ sun4i-a10-inet-3w.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
deleted file mode 100644
index 20f9ed2..0000000
--- a/arch/arm/dts/sun4i-a10-a1000.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2013 Emilio López
- *
- * Emilio López <emilio@elopez.com.ar>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Mele A1000";
- compatible = "mele,a1000", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "a1000:red:usr";
- gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
- };
-
- led-1 {
- label = "a1000:blue:pwr";
- gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <20000>;
- enable-active-high;
- gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "On-board SPDIF";
-
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- };
-};
-
-&ahci {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&de {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-#include "axp209.dtsi"
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&spdif {
- pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pin>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
deleted file mode 100644
index 816d534..0000000
--- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "BA10 tvbox";
- compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- regulator-boot-on;
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
deleted file mode 100644
index 7426298..0000000
--- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Chuwi V7 CW0825";
- compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- ft5306de4: touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-size-x = <1024>;
- touchscreen-size-y = <768>;
- };
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button-800 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <800000>;
- };
-
- button-1000 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <1000000>;
- };
-
- button-1200 {
- label = "Back";
- linux,code = <KEY_BACK>;
- channel = <0>;
- voltage = <1200000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
deleted file mode 100644
index 0645d60..0000000
--- a/arch/arm/dts/sun4i-a10-cubieboard.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Cubietech Cubieboard";
- compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_cubieboard>;
-
- led-0 {
- label = "cubieboard:blue:usr";
- gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
- };
-
- led-1 {
- label = "cubieboard:green:usr";
- gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&ahci {
- target-supply = <®_ahci_5v>;
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_cubieboard: led-pins {
- pins = "PH20", "PH21";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_ahci_5v {
- status = "okay";
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1450000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pi_pins>,
- <&spi0_cs0_pi_pin>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
deleted file mode 100644
index 63e77c0..0000000
--- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Dserve DSRV9703C";
- compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
- power-supply = <®_vcc3v3>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- haptics {
- compatible = "regulator-haptic";
- haptic-supply = <®_motor>;
- min-microvolt = <3000000>;
- max-microvolt = <3000000>;
- };
-
- reg_motor: reg-motor {
- compatible = "regulator-fixed";
- regulator-name = "vcc-motor";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- enable-active-high;
- gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
- };
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- /* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
-};
-
-&i2c2 {
- status = "okay";
-
- ft5406ee8: touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
- touchscreen-size-x = <1024>;
- touchscreen-size-y = <768>;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-
- button-800 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <800000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts
deleted file mode 100644
index ea7a59d..0000000
--- a/arch/arm/dts/sun4i-a10-gemei-g9.dts
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Copyright 2015 Priit Laes
- *
- * Priit Laes <plaes@plaes.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Gemei G9 Tablet";
- compatible = "gemei,g9", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-/*
- * TODO:
- * 2x cameras via CSI
- * AXP battery management
- * NAND
- * OTG
- * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
- */
-&codec {
- /* PH15 controls power to external amplifier (ft2012q) */
- allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- /* Accelerometer */
- bma250@18 {
- compatible = "bosch,bma250";
- reg = <0x18>;
- interrupt-parent = <&pio>;
- interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
-
- status = "okay";
-
- button-158 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <158730>;
- };
-
- button-349 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <349206>;
- };
-
- button-1142 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1142856>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts
deleted file mode 100644
index 47dea09..0000000
--- a/arch/arm/dts/sun4i-a10-hackberry.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Miniand Hackberry";
- compatible = "miniand,hackberry", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <20000>;
- enable-active-high;
- gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy0>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
deleted file mode 100644
index bf2044b..0000000
--- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Hyundai A7HD";
- compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
deleted file mode 100644
index 60e432a..0000000
--- a/arch/arm/dts/sun4i-a10-inet1.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "iNet-1";
- compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
- power-supply = <®_vcc3v3>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- /* Accelerometer */
- bma250@18 {
- compatible = "bosch,bma250";
- reg = <0x18>;
- interrupt-parent = <&pio>;
- interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
- };
-};
-
-&i2c2 {
- status = "okay";
-
- ft5x: touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
- touchscreen-size-x = <600>;
- touchscreen-size-y = <1024>;
- touchscreen-swapped-x-y;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-1000 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <1000000>;
- };
-
- button-1200 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <1200000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts
deleted file mode 100644
index 76016f2..0000000
--- a/arch/arm/dts/sun4i-a10-inet97fv2.dts
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright 2014 Open Source Support GmbH
- *
- * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "INet-97F Rev 02";
- compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- ft5406ee8: touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-600 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <600000>;
- };
-
- button-800 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <800000>;
- };
-
- button-1000 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <1000000>;
- };
-
- button-1200 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1200000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
deleted file mode 100644
index 62e7aa5..0000000
--- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "iNet-9F Rev 03";
- compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- event-left-joystick-left {
- label = "Left Joystick Left";
- linux,code = <ABS_X>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
- };
-
- event-left-joystick-right {
- label = "Left Joystick Right";
- linux,code = <ABS_X>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
- };
-
- event-left-joystick-up {
- label = "Left Joystick Up";
- linux,code = <ABS_Y>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
- };
-
- event-left-joystick-down {
- label = "Left Joystick Down";
- linux,code = <ABS_Y>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
- };
-
- event-right-joystick-left {
- label = "Right Joystick Left";
- linux,code = <ABS_Z>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
- };
-
- event-right-joystick-right {
- label = "Right Joystick Right";
- linux,code = <ABS_Z>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
- };
-
- event-right-joystick-up {
- label = "Right Joystick Up";
- linux,code = <ABS_RZ>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
- };
-
- event-right-joystick-down {
- label = "Right Joystick Down";
- linux,code = <ABS_RZ>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
- };
-
- event-dpad-left {
- label = "DPad Left";
- linux,code = <ABS_HAT0X>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
- };
-
- event-dpad-right {
- label = "DPad Right";
- linux,code = <ABS_HAT0X>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
- };
-
- event-dpad-up {
- label = "DPad Up";
- linux,code = <ABS_HAT0Y>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <0xffffffff>; /* -1 */
- gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
- };
-
- event-dpad-down {
- label = "DPad Down";
- linux,code = <ABS_HAT0Y>;
- linux,input-type = <EV_ABS>;
- linux,input-value = <1>;
- gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
- };
-
- event-x {
- label = "Button X";
- linux,code = <BTN_X>;
- gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
- };
-
- event-y {
- label = "Button Y";
- linux,code = <BTN_Y>;
- gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
- };
-
- event-a {
- label = "Button A";
- linux,code = <BTN_A>;
- gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
- };
-
- event-b {
- label = "Button B";
- linux,code = <BTN_B>;
- gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
- };
-
- event-select {
- label = "Select Button";
- linux,code = <BTN_SELECT>;
- gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
- };
-
- event-start {
- label = "Start Button";
- linux,code = <BTN_START>;
- gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
- };
-
- event-top-left {
- label = "Top Left Button";
- linux,code = <BTN_TL>;
- gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
- };
-
- event-top-right {
- label = "Top Right Button";
- linux,code = <BTN_TR>;
- gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
- };
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- /* Accelerometer */
- bma250@18 {
- compatible = "bosch,bma250";
- reg = <0x18>;
- interrupt-parent = <&pio>;
- interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
- };
-};
-
-&i2c2 {
- status = "okay";
-
- ft5406ee8: touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-600 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <600000>;
- };
-
- button-800 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <800000>;
- };
-
- button-1000 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <1000000>;
- };
-
- button-1200 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1200000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
deleted file mode 100644
index d4e319d..0000000
--- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2015 Josef Gajdusek <atx@atx.name>
- * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-itead-core-common.dtsi"
-
-/ {
- model = "Iteaduino Plus A10";
- compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
-};
-
-&ahci {
- target-supply = <®_ahci_5v>;
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins>;
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-
- axp209: pmic@34 {
- interrupts = <0>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-®_ahci_5v {
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pi_pins>,
- <&spi0_cs0_pi_pin>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-0 = <&uart0_pb_pins>;
-};
diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
deleted file mode 100644
index 1aeb0bd..0000000
--- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2015 Gábor Nyers
- *
- * Gábor Nyers <gabor.nyers@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Jesurun Q5";
- compatible = "jesurun,q5", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led {
- label = "q5:green:usr";
- gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
- };
-
- };
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <20000>;
- enable-active-high;
- gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
- };
-};
-
-&ahci {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&mdio {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- regulator-boot-on;
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
deleted file mode 100644
index 81fdb21..0000000
--- a/arch/arm/dts/sun4i-a10-marsboard.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright 2015 Aleksei Mamlin
- * Aleksei Mamlin <mamlinav@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "HAOYU Electronics Marsboard A10";
- compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "marsboard:red1:usr";
- gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
- };
-
- led-1 {
- label = "marsboard:red2:usr";
- gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
- };
-
- led-2 {
- label = "marsboard:red3:usr";
- gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
- };
-
- led-3 {
- label = "marsboard:red4:usr";
- gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&ahci {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pi_pins>,
- <&spi0_cs0_pi_pin>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts
deleted file mode 100644
index f9d74e2..0000000
--- a/arch/arm/dts/sun4i-a10-mini-xplus.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "PineRiver Mini X-Plus";
- compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins>;
- status = "okay";
-};
-
-&ir0_rx_pins {
- /* The ir receiver is not always populated */
- bias-pull-up;
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- regulator-boot-on;
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts
deleted file mode 100644
index 059fe9c..0000000
--- a/arch/arm/dts/sun4i-a10-mk802.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "MK802";
- compatible = "allwinner,mk802", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-};
-
-&codec {
- status = "okay";
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-mk802ii.dts b/arch/arm/dts/sun4i-a10-mk802ii.dts
deleted file mode 100644
index 17dcdf0..0000000
--- a/arch/arm/dts/sun4i-a10-mk802ii.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "MK802ii";
- compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
deleted file mode 100644
index 83d283c..0000000
--- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Olimex A10-OLinuXino-LIME";
- compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
-
- led {
- label = "a10-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&ahci {
- target-supply = <®_ahci_5v>;
- status = "okay";
-};
-
-&cpu0 {
- /*
- * The A10-Lime is known to be unstable when running at 1008 MHz
- */
- operating-points =
- /* kHz uV */
- <912000 1350000>,
- <864000 1300000>,
- <624000 1250000>;
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&i2c1 {
- status = "okay";
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c16";
- reg = <0x50>;
- pagesize = <16>;
- };
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_olinuxinolime: led-pin {
- pins = "PH2";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts
deleted file mode 100644
index a332d61..0000000
--- a/arch/arm/dts/sun4i-a10-pcduino.dts
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "LinkSprite pcDuino";
- compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "pcduino:green:tx";
- gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
- };
-
- led-1 {
- label = "pcduino:green:rx";
- gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key-back {
- label = "Key Back";
- linux,code = <KEY_BACK>;
- gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
- };
-
- key-home {
- label = "Key Home";
- linux,code = <KEY_HOME>;
- gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
- };
-
- key-menu {
- label = "Key Menu";
- linux,code = <KEY_MENU>;
- gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-#include "axp209.dtsi"
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */
- usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-pcduino2.dts b/arch/arm/dts/sun4i-a10-pcduino2.dts
deleted file mode 100644
index bc4f128..0000000
--- a/arch/arm/dts/sun4i-a10-pcduino2.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The LinkSprite pcDuino2 board is almost identical to the older
- * LinkSprite pcDuino1 board. The only software visible difference
- * is that the pcDuino2 board got a USB VBUS voltage regulator, which
- * is controlled by the PD2 pin (pulled-up by default). Also one of
- * the USB host ports has been replaced with a USB WIFI chip.
- */
-
-#include "sun4i-a10-pcduino.dts"
-
-/ {
- model = "LinkSprite pcDuino2";
- compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
-};
-
-®_usb2_vbus {
- gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
deleted file mode 100644
index c325969..0000000
--- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Point of View Protab2-IPS9";
- compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
- power-supply = <®_vcc3v3>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- /* pull-ups and devices require AXP209 LDO3 */
- status = "failed";
-};
-
-&i2c2 {
- status = "okay";
-
- touchscreen@5c {
- compatible = "pixcir,pixcir_tangoc";
- reg = <0x5c>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
- attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
- enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
- wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
- touchscreen-size-x = <1024>;
- touchscreen-size-y = <768>;
- touchscreen-inverted-x;
- touchscreen-inverted-y;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-400 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <400000>;
- };
-
- button-800 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <800000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts
deleted file mode 100644
index 3628f12..0000000
--- a/arch/arm/dts/sun4i-a10-topwise-a721.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Topwise A721";
- compatible = "topwise,a721", "allwinner,sun4i-a10";
-
- aliases {
- serial0 = &uart0;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
- power-supply = <®_vbat>;
- enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
- brightness-levels = <0 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- panel {
- compatible = "starry,kr070pe2t";
- backlight = <&backlight>;
- power-supply = <®_lcd_power>;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&tcon0_out_panel>;
- };
- };
- };
-
- reg_lcd_power: reg-lcd-power {
- compatible = "regulator-fixed";
- regulator-name = "reg-lcd-power";
- gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
- enable-active-high;
- };
-
- reg_vbat: reg-vbat {
- compatible = "regulator-fixed";
- regulator-name = "vbat";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- };
-
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-&battery_power_supply {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- accelerometer@4c {
- compatible = "fsl,mma7660";
- reg = <0x4c>;
- };
-};
-
-&i2c2 {
- status = "okay";
-
- touchscreen@38 {
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&pio>;
- interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- vcc-supply = <®_vcc3v3>;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-571 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <571428>;
- };
-
- button-761 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <761904>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- vcc-pb-supply = <®_vcc3v3>;
- vcc-pf-supply = <®_vcc3v3>;
- vcc-ph-supply = <®_vcc3v3>;
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_usb0_vbus {
- status = "okay";
-};
-
-®_usb1_vbus {
- status = "okay";
-};
-
-®_usb2_vbus {
- status = "okay";
-};
-
-&tcon0_out {
- tcon0_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi
deleted file mode 100644
index 51a6464..0000000
--- a/arch/arm/dts/sun4i-a10.dtsi
+++ /dev/null
@@ -1,1271 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/clock/sun4i-a10-ccu.h>
-#include <dt-bindings/reset/sun4i-a10-ccu.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
-
- aliases {
- ethernet0 = &emac;
- };
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer-lcd0-hdmi {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
- <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
- <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
- status = "disabled";
- };
-
- framebuffer-fe0-lcd0-hdmi {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
- <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
- <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
- <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
- status = "disabled";
- };
-
- framebuffer-fe0-lcd0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
- <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
- <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
- <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
- status = "disabled";
- };
-
- framebuffer-fe0-lcd0-tve0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
- <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
- <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
- <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
- status = "disabled";
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&ccu CLK_CPU>;
- clock-latency = <244144>; /* 8 32k periods */
- operating-points =
- /* kHz uV */
- <1008000 1400000>,
- <912000 1350000>,
- <864000 1300000>,
- <624000 1250000>;
- #cooling-cells = <2>;
- };
- };
-
- thermal-zones {
- cpu-thermal {
- /* milliseconds */
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&rtp>;
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-
- trips {
- cpu_alert0: cpu-alert0 {
- /* milliCelsius */
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- /* milliCelsius */
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: clk-24M {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk-32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
- };
-
- de: display-engine {
- compatible = "allwinner,sun4i-a10-display-engine";
- allwinner,pipelines = <&fe0>, <&fe1>;
- status = "disabled";
- };
-
- pmu {
- compatible = "arm,cortex-a8-pmu";
- interrupts = <3>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- default-pool {
- compatible = "shared-dma-pool";
- size = <0x6000000>;
- alloc-ranges = <0x40000000 0x10000000>;
- reusable;
- linux,cma-default;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- system-control@1c00000 {
- compatible = "allwinner,sun4i-a10-system-control";
- reg = <0x01c00000 0x30>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram_a: sram@0 {
- compatible = "mmio-sram";
- reg = <0x00000000 0xc000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00000000 0xc000>;
-
- emac_sram: sram-section@8000 {
- compatible = "allwinner,sun4i-a10-sram-a3-a4";
- reg = <0x8000 0x4000>;
- status = "disabled";
- };
- };
-
- sram_d: sram@10000 {
- compatible = "mmio-sram";
- reg = <0x00010000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00010000 0x1000>;
-
- otg_sram: sram-section@0 {
- compatible = "allwinner,sun4i-a10-sram-d";
- reg = <0x0000 0x1000>;
- status = "disabled";
- };
- };
-
- sram_c: sram@1d00000 {
- compatible = "mmio-sram";
- reg = <0x01d00000 0xd0000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x01d00000 0xd0000>;
-
- ve_sram: sram-section@0 {
- compatible = "allwinner,sun4i-a10-sram-c1";
- reg = <0x000000 0x80000>;
- };
- };
- };
-
- dma: dma-controller@1c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ccu CLK_AHB_DMA>;
- #dma-cells = <2>;
- };
-
- nfc: nand-controller@1c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <37>;
- clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 3>;
- dma-names = "rxtx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@1c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@1c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- emac: ethernet@1c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
- interrupts = <55>;
- clocks = <&ccu CLK_AHB_EMAC>;
- allwinner,sram = <&emac_sram 1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins>;
- status = "disabled";
- };
-
- mdio: mdio@1c0b080 {
- compatible = "allwinner,sun4i-a10-mdio";
- reg = <0x01c0b080 0x14>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun4i-a10-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- resets = <&ccu RST_TCON0>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD0>,
- <&ccu CLK_TCON0_CH0>,
- <&ccu CLK_TCON0_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon0-pixel-clock";
- #clock-cells = <0>;
- dmas = <&dma SUN4I_DMA_DEDICATED 14>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon0>;
- };
-
- tcon0_in_be1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&be1_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_hdmi: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&hdmi_in_tcon0>;
- allwinner,tcon-channel = <1>;
- };
- };
- };
- };
-
- tcon1: lcd-controller@1c0d000 {
- compatible = "allwinner,sun4i-a10-tcon";
- reg = <0x01c0d000 0x1000>;
- interrupts = <45>;
- resets = <&ccu RST_TCON1>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD1>,
- <&ccu CLK_TCON1_CH0>,
- <&ccu CLK_TCON1_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon1-pixel-clock";
- #clock-cells = <0>;
- dmas = <&dma SUN4I_DMA_DEDICATED 15>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon1_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon1_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon1>;
- };
-
- tcon1_in_be1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&be1_out_tcon1>;
- };
- };
-
- tcon1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon1_out_hdmi: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&hdmi_in_tcon1>;
- allwinner,tcon-channel = <1>;
- };
- };
- };
- };
-
- video-codec@1c0e000 {
- compatible = "allwinner,sun4i-a10-video-engine";
- reg = <0x01c0e000 0x1000>;
- clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
- <&ccu CLK_DRAM_VE>;
- clock-names = "ahb", "mod", "ram";
- resets = <&ccu RST_VE>;
- interrupts = <53>;
- allwinner,sram = <&ve_sram 1>;
- };
-
- mmc0: mmc@1c0f000 {
- compatible = "allwinner,sun4i-a10-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- interrupts = <32>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@1c10000 {
- compatible = "allwinner,sun4i-a10-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- interrupts = <33>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@1c11000 {
- compatible = "allwinner,sun4i-a10-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- interrupts = <34>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc3: mmc@1c12000 {
- compatible = "allwinner,sun4i-a10-mmc";
- reg = <0x01c12000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
- clock-names = "ahb", "mmc";
- interrupts = <35>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb_otg: usb@1c13000 {
- compatible = "allwinner,sun4i-a10-musb";
- reg = <0x01c13000 0x0400>;
- clocks = <&ccu CLK_AHB_OTG>;
- interrupts = <38>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- allwinner,sram = <&otg_sram 1>;
- dr_mode = "otg";
- status = "disabled";
- };
-
- usbphy: phy@1c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-phy";
- reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
- reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&ccu CLK_USB_PHY>;
- clock-names = "usb_phy";
- resets = <&ccu RST_USB_PHY0>,
- <&ccu RST_USB_PHY1>,
- <&ccu RST_USB_PHY2>;
- reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
- status = "disabled";
- };
-
- ehci0: usb@1c14000 {
- compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ccu CLK_AHB_EHCI0>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@1c14400 {
- compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <64>;
- clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- crypto: crypto-engine@1c15000 {
- compatible = "allwinner,sun4i-a10-crypto";
- reg = <0x01c15000 0x1000>;
- interrupts = <86>;
- clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
- clock-names = "ahb", "mod";
- };
-
- hdmi: hdmi@1c16000 {
- compatible = "allwinner,sun4i-a10-hdmi";
- reg = <0x01c16000 0x1000>;
- interrupts = <58>;
- clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
- <&ccu CLK_PLL_VIDEO0_2X>,
- <&ccu CLK_PLL_VIDEO1_2X>;
- clock-names = "ahb", "mod", "pll-0", "pll-1";
- dmas = <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_DEDICATED 24>;
- dma-names = "ddc-tx", "ddc-rx", "audio-tx";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hdmi_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_hdmi>;
- };
-
- hdmi_in_tcon1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tcon1_out_hdmi>;
- };
- };
-
- hdmi_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- spi2: spi@1c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- ahci: sata@1c18000 {
- compatible = "allwinner,sun4i-a10-ahci";
- reg = <0x01c18000 0x1000>;
- interrupts = <56>;
- clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
- status = "disabled";
- };
-
- ehci1: usb@1c1c000 {
- compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
- reg = <0x01c1c000 0x100>;
- interrupts = <40>;
- clocks = <&ccu CLK_AHB_EHCI1>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci1: usb@1c1c400 {
- compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
- reg = <0x01c1c400 0x100>;
- interrupts = <65>;
- clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- csi1: csi@1c1d000 {
- compatible = "allwinner,sun4i-a10-csi1";
- reg = <0x01c1d000 0x1000>;
- interrupts = <43>;
- clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
- clock-names = "bus", "ram";
- resets = <&ccu RST_CSI1>;
- status = "disabled";
- };
-
- spi3: spi@1c1f000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c1f000 0x1000>;
- interrupts = <50>;
- clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 31>,
- <&dma SUN4I_DMA_DEDICATED 30>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- ccu: clock@1c20000 {
- compatible = "allwinner,sun4i-a10-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- intc: interrupt-controller@1c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@1c20800 {
- compatible = "allwinner,sun4i-a10-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <3>;
- #gpio-cells = <3>;
-
- can0_ph_pins: can0-ph-pins {
- pins = "PH20", "PH21";
- function = "can";
- };
-
- /omit-if-no-ref/
- csi1_8bits_pg_pins: csi1-8bits-pg-pins {
- pins = "PG0", "PG2", "PG3", "PG4", "PG5",
- "PG6", "PG7", "PG8", "PG9", "PG10",
- "PG11";
- function = "csi1";
- };
-
- /omit-if-no-ref/
- csi1_24bits_ph_pins: csi1-24bits-ph-pins {
- pins = "PH0", "PH1", "PH2", "PH3", "PH4",
- "PH5", "PH6", "PH7", "PH8", "PH9",
- "PH10", "PH11", "PH12", "PH13", "PH14",
- "PH15", "PH16", "PH17", "PH18", "PH19",
- "PH20", "PH21", "PH22", "PH23", "PH24",
- "PH25", "PH26", "PH27";
- function = "csi1";
- };
-
- /omit-if-no-ref/
- csi1_clk_pg_pin: csi1-clk-pg-pin {
- pins = "PG1";
- function = "csi1";
- };
-
- emac_pins: emac0-pins {
- pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- function = "emac";
- };
-
- i2c0_pins: i2c0-pins {
- pins = "PB0", "PB1";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1-pins {
- pins = "PB18", "PB19";
- function = "i2c1";
- };
-
- i2c2_pins: i2c2-pins {
- pins = "PB20", "PB21";
- function = "i2c2";
- };
-
- ir0_rx_pins: ir0-rx-pin {
- pins = "PB4";
- function = "ir0";
- };
-
- ir0_tx_pins: ir0-tx-pin {
- pins = "PB3";
- function = "ir0";
- };
-
- ir1_rx_pins: ir1-rx-pin {
- pins = "PB23";
- function = "ir1";
- };
-
- ir1_tx_pins: ir1-tx-pin {
- pins = "PB22";
- function = "ir1";
- };
-
- mmc0_pins: mmc0-pins {
- pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- ps2_ch0_pins: ps2-ch0-pins {
- pins = "PI20", "PI21";
- function = "ps2";
- };
-
- ps2_ch1_ph_pins: ps2-ch1-ph-pins {
- pins = "PH12", "PH13";
- function = "ps2";
- };
-
- pwm0_pin: pwm0-pin {
- pins = "PB2";
- function = "pwm";
- };
-
- pwm1_pin: pwm1-pin {
- pins = "PI3";
- function = "pwm";
- };
-
- spdif_tx_pin: spdif-tx-pin {
- pins = "PB13";
- function = "spdif";
- bias-pull-up;
- };
-
- spi0_pi_pins: spi0-pi-pins {
- pins = "PI11", "PI12", "PI13";
- function = "spi0";
- };
-
- spi0_cs0_pi_pin: spi0-cs0-pi-pin {
- pins = "PI10";
- function = "spi0";
- };
-
- spi1_pins: spi1-pins {
- pins = "PI17", "PI18", "PI19";
- function = "spi1";
- };
-
- spi1_cs0_pin: spi1-cs0-pin {
- pins = "PI16";
- function = "spi1";
- };
-
- spi2_pb_pins: spi2-pb-pins {
- pins = "PB15", "PB16", "PB17";
- function = "spi2";
- };
-
- spi2_pc_pins: spi2-pc-pins {
- pins = "PC20", "PC21", "PC22";
- function = "spi2";
- };
-
- spi2_cs0_pb_pin: spi2-cs0-pb-pin {
- pins = "PB14";
- function = "spi2";
- };
-
- spi2_cs0_pc_pins: spi2-cs0-pc-pin {
- pins = "PC19";
- function = "spi2";
- };
-
- uart0_pb_pins: uart0-pb-pins {
- pins = "PB22", "PB23";
- function = "uart0";
- };
-
- uart0_pf_pins: uart0-pf-pins {
- pins = "PF2", "PF4";
- function = "uart0";
- };
-
- uart1_pins: uart1-pins {
- pins = "PA10", "PA11";
- function = "uart1";
- };
- };
-
- timer@1c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>,
- <23>,
- <24>,
- <25>,
- <67>,
- <68>;
- clocks = <&osc24M>;
- };
-
- wdt: watchdog@1c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- interrupts = <24>;
- clocks = <&osc24M>;
- };
-
- rtc: rtc@1c20d00 {
- compatible = "allwinner,sun4i-a10-rtc";
- reg = <0x01c20d00 0x20>;
- interrupts = <24>;
- };
-
- pwm: pwm@1c20e00 {
- compatible = "allwinner,sun4i-a10-pwm";
- reg = <0x01c20e00 0xc>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- spdif: spdif@1c21000 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-spdif";
- reg = <0x01c21000 0x400>;
- interrupts = <13>;
- clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
- clock-names = "apb", "spdif";
- dmas = <&dma SUN4I_DMA_NORMAL 2>,
- <&dma SUN4I_DMA_NORMAL 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ir0: ir@1c21800 {
- compatible = "allwinner,sun4i-a10-ir";
- clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
- clock-names = "apb", "ir";
- interrupts = <5>;
- reg = <0x01c21800 0x40>;
- status = "disabled";
- };
-
- ir1: ir@1c21c00 {
- compatible = "allwinner,sun4i-a10-ir";
- clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
- clock-names = "apb", "ir";
- interrupts = <6>;
- reg = <0x01c21c00 0x40>;
- status = "disabled";
- };
-
- i2s0: i2s@1c22400 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-i2s";
- reg = <0x01c22400 0x400>;
- interrupts = <16>;
- clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
- clock-names = "apb", "mod";
- dmas = <&dma SUN4I_DMA_NORMAL 3>,
- <&dma SUN4I_DMA_NORMAL 3>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lradc: lradc@1c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- codec: codec@1c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec";
- reg = <0x01c22c00 0x40>;
- interrupts = <30>;
- clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
- clock-names = "apb", "codec";
- dmas = <&dma SUN4I_DMA_NORMAL 19>,
- <&dma SUN4I_DMA_NORMAL 19>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- sid: eeprom@1c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@1c25000 {
- compatible = "allwinner,sun4i-a10-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
- uart0: serial@1c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <1>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART0>;
- status = "disabled";
- };
-
- uart1: serial@1c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART1>;
- status = "disabled";
- };
-
- uart2: serial@1c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <3>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART2>;
- status = "disabled";
- };
-
- uart3: serial@1c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART3>;
- status = "disabled";
- };
-
- uart4: serial@1c29000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c29000 0x400>;
- interrupts = <17>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART4>;
- status = "disabled";
- };
-
- uart5: serial@1c29400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c29400 0x400>;
- interrupts = <18>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART5>;
- status = "disabled";
- };
-
- uart6: serial@1c29800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c29800 0x400>;
- interrupts = <19>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART6>;
- status = "disabled";
- };
-
- uart7: serial@1c29c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c29c00 0x400>;
- interrupts = <20>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART7>;
- status = "disabled";
- };
-
- ps20: ps2@1c2a000 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a000 0x400>;
- interrupts = <62>;
- clocks = <&ccu CLK_APB1_PS20>;
- status = "disabled";
- };
-
- ps21: ps2@1c2a400 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a400 0x400>;
- interrupts = <63>;
- clocks = <&ccu CLK_APB1_PS21>;
- status = "disabled";
- };
-
- i2c0: i2c@1c2ac00 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&ccu CLK_APB1_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@1c2b000 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&ccu CLK_APB1_I2C1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@1c2b400 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&ccu CLK_APB1_I2C2>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- can0: can@1c2bc00 {
- compatible = "allwinner,sun4i-a10-can";
- reg = <0x01c2bc00 0x400>;
- interrupts = <26>;
- clocks = <&ccu CLK_APB1_CAN>;
- status = "disabled";
- };
-
- mali: gpu@1c40000 {
- compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
- reg = <0x01c40000 0x10000>;
- interrupts = <69>,
- <70>,
- <71>,
- <72>,
- <73>;
- interrupt-names = "gp",
- "gpmmu",
- "pp0",
- "ppmmu0",
- "pmu";
- clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
- clock-names = "bus", "core";
- resets = <&ccu RST_GPU>;
-
- assigned-clocks = <&ccu CLK_GPU>;
- assigned-clock-rates = <384000000>;
- };
-
- fe0: display-frontend@1e00000 {
- compatible = "allwinner,sun4i-a10-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
- <&ccu CLK_DRAM_DE_FE0>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe0>;
- };
-
- fe0_out_be1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&be1_in_fe0>;
- };
- };
- };
- };
-
- fe1: display-frontend@1e20000 {
- compatible = "allwinner,sun4i-a10-display-frontend";
- reg = <0x01e20000 0x20000>;
- interrupts = <48>;
- clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
- <&ccu CLK_DRAM_DE_FE1>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe1_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe1>;
- };
-
- fe1_out_be1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&be1_in_fe1>;
- };
- };
- };
- };
-
- be1: display-backend@1e40000 {
- compatible = "allwinner,sun4i-a10-display-backend";
- reg = <0x01e40000 0x10000>;
- interrupts = <48>;
- clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
- <&ccu CLK_DRAM_DE_BE1>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be1_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be1_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be1>;
- };
-
- be1_in_fe1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&fe1_out_be1>;
- };
- };
-
- be1_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be1_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be1>;
- };
-
- be1_out_tcon1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tcon1_in_be1>;
- };
- };
- };
- };
-
- be0: display-backend@1e60000 {
- compatible = "allwinner,sun4i-a10-display-backend";
- reg = <0x01e60000 0x10000>;
- interrupts = <47>;
- clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
- <&ccu CLK_DRAM_DE_BE0>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
-
- be0_in_fe1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&fe1_out_be0>;
- };
- };
-
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be0>;
- };
-
- be0_out_tcon1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tcon1_in_be0>;
- };
- };
- };
- };
- };
-};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 4260101..6e4a209 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -287,6 +287,7 @@
select SUPPORT_SPL
imply SPL_SYS_I2C_LEGACY
imply SYS_I2C_LEGACY
+ imply OF_UPSTREAM
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 57e91d0..96e3d19 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-olinuxino-lime"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=480
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 02b3e69..40f52d1 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-chuwi-v7-cw0825"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index ab3f65a..9fc57c2 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-cubieboard"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=480
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 482e0fb..541f98d 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-hyundai-a7hd"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_EMR1=4
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index 49dcfa0..0e1a778 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pcduino"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB1_VBUS_PIN=""
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index 3c5312d..c7608ed 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-marsboard"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_AHCI=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 9ac2e48..93e73eb 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-a1000"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_VIDEO_VGA=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index e8bc148..e64352b 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mini-xplus"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index b89dd8e..c76f36e 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-ba10-tvbox"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=384
diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig
index f5ff69d..06a79c9 100644
--- a/configs/dserve_dsrv9703c_defconfig
+++ b/configs/dserve_dsrv9703c_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-dserve-dsrv9703c"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index 5cc1a1d..5ab210b 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
+# CONFIG_OF_UPSTREAM is not set
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index 38b2010..415575c 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
+# CONFIG_OF_UPSTREAM is not set
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig
index f81120b..68a6df5 100644
--- a/configs/inet1_defconfig
+++ b/configs/inet1_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet1"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig
index d5d2dc3..a5414e2 100644
--- a/configs/inet97fv2_defconfig
+++ b/configs/inet97fv2_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet97fv2"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig
index 4485f93..5b0cda1 100644
--- a/configs/inet9f_rev03_defconfig
+++ b/configs/inet9f_rev03_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet9f-rev03"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index c99be7c..b41c2cf 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-jesurun-q5"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=312
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 416565e..8ebd5e9 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB2_VBUS_PIN="PH12"
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index 965a9cd..c56a4c7 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802ii"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig
index a62c9f8..330c97f 100644
--- a/configs/pov_protab2_ips9_defconfig
+++ b/configs/pov_protab2_ips9_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pov-protab2-ips9"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index 3fee7c2..4f3d0ec 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-gemei-g9"
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432