diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h
index 9ef03a6..d323829 100644
--- a/include/configs/mv88f6281gtw_ge.h
+++ b/include/configs/mv88f6281gtw_ge.h
@@ -33,66 +33,19 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_MV88F6281GTW_GE	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_PING
@@ -100,17 +53,18 @@
 #define CONFIG_CMD_USB
 
 /*
- * Flash configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH		1
-#define CONFIG_HARD_SPI			1
-#define CONFIG_KIRKWOOD_SPI		1
-#define CONFIG_SPI_FLASH_MACRONIX	1
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000	/*50Mhz */
-#endif
+#include "mv-common.h"
+
+/* Unwanted stuffs from mv-common.h */
+#undef	CONFIG_CMD_EXT2
+#undef	CONFIG_CMD_JFFS2
+#undef	CONFIG_CMD_FAT
+#undef	CONFIG_CMD_UBI
+#undef	CONFIG_CMD_UBIFS
+#undef	CONFIG_RBTREE
 
 /*
  *  Environment variables configurations
@@ -142,59 +96,11 @@
 	"x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Marvell 88Exxxx Switch configurations
- */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init phy/swtich */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable mv88e61xx switch driver */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#endif /* CONFIG_CMD_NET */
 
 #endif /* _CONFIG_MV88F6281GTW_GE_H */