bootm: Support boot measurement
Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
diff --git a/boot/Kconfig b/boot/Kconfig
index a01e6cb..fbc49c5 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -685,6 +685,38 @@
loaded. If a board needs the legacy image format support in this
case, enable it here.
+config MEASURED_BOOT
+ bool "Measure boot images and configuration when booting without EFI"
+ depends on HASH && TPM_V2
+ help
+ This option enables measurement of the boot process when booting
+ without UEFI . Measurement involves creating cryptographic hashes
+ of the binary images that are booting and storing them in the TPM.
+ In addition, a log of these hashes is stored in memory for the OS
+ to verify the booted images and configuration. Enable this if the
+ OS has configured some memory area for the event log and you intend
+ to use some attestation tools on your system.
+
+if MEASURED_BOOT
+ config MEASURE_DEVICETREE
+ bool "Measure the devicetree image"
+ default y if MEASURED_BOOT
+ help
+ On some platforms, the devicetree is not static as it may contain
+ random MAC addresses or other such data that changes each boot.
+ Therefore, it should not be measured into the TPM. In that case,
+ disable the measurement here.
+
+ config MEASURE_IGNORE_LOG
+ bool "Ignore the existing event log"
+ default n
+ help
+ On platforms that use an event log memory region that persists
+ through system resets and are the first stage bootloader, then
+ this option should be enabled to ignore any existing data in the
+ event log memory region.
+endif # MEASURED_BOOT
+
config SUPPORT_RAW_INITRD
bool "Enable raw initrd images"
help
diff --git a/boot/bootm.c b/boot/bootm.c
index b1c3afe..11b6b3c 100644
--- a/boot/bootm.c
+++ b/boot/bootm.c
@@ -22,6 +22,7 @@
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/sizes.h>
+#include <tpm-v2.h>
#if defined(CONFIG_CMD_USB)
#include <usb.h>
#endif
@@ -673,6 +674,75 @@
return 0;
}
+int bootm_measure(struct bootm_headers *images)
+{
+ int ret = 0;
+
+ /* Skip measurement if EFI is going to do it */
+ if (images->os.os == IH_OS_EFI &&
+ IS_ENABLED(CONFIG_EFI_TCG2_PROTOCOL) &&
+ IS_ENABLED(CONFIG_BOOTM_EFI))
+ return ret;
+
+ if (IS_ENABLED(CONFIG_MEASURED_BOOT)) {
+ struct tcg2_event_log elog;
+ struct udevice *dev;
+ void *initrd_buf;
+ void *image_buf;
+ const char *s;
+ u32 rd_len;
+ bool ign;
+
+ elog.log_size = 0;
+ ign = IS_ENABLED(CONFIG_MEASURE_IGNORE_LOG);
+ ret = tcg2_measurement_init(&dev, &elog, ign);
+ if (ret)
+ return ret;
+
+ image_buf = map_sysmem(images->os.image_start,
+ images->os.image_len);
+ ret = tcg2_measure_data(dev, &elog, 8, images->os.image_len,
+ image_buf, EV_COMPACT_HASH,
+ strlen("linux") + 1, (u8 *)"linux");
+ if (ret)
+ goto unmap_image;
+
+ rd_len = images->rd_end - images->rd_start;
+ initrd_buf = map_sysmem(images->rd_start, rd_len);
+ ret = tcg2_measure_data(dev, &elog, 9, rd_len, initrd_buf,
+ EV_COMPACT_HASH, strlen("initrd") + 1,
+ (u8 *)"initrd");
+ if (ret)
+ goto unmap_initrd;
+
+ if (IS_ENABLED(CONFIG_MEASURE_DEVICETREE)) {
+ ret = tcg2_measure_data(dev, &elog, 0, images->ft_len,
+ (u8 *)images->ft_addr,
+ EV_TABLE_OF_DEVICES,
+ strlen("dts") + 1,
+ (u8 *)"dts");
+ if (ret)
+ goto unmap_initrd;
+ }
+
+ s = env_get("bootargs");
+ if (!s)
+ s = "";
+ ret = tcg2_measure_data(dev, &elog, 1, strlen(s) + 1, (u8 *)s,
+ EV_PLATFORM_CONFIG_FLAGS,
+ strlen(s) + 1, (u8 *)s);
+
+unmap_initrd:
+ unmap_sysmem(initrd_buf);
+
+unmap_image:
+ unmap_sysmem(image_buf);
+ tcg2_measurement_term(dev, &elog, ret != 0);
+ }
+
+ return ret;
+}
+
/**
* Execute selected states of the bootm command.
*
@@ -724,6 +794,10 @@
if (!ret && (states & BOOTM_STATE_FINDOTHER))
ret = bootm_find_other(cmdtp, flag, argc, argv);
+ if (IS_ENABLED(CONFIG_MEASURED_BOOT) && !ret &&
+ (states & BOOTM_STATE_MEASURE))
+ bootm_measure(images);
+
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
iflag = bootm_disable_interrupts();