dm: arm: imx: cx9020: migrate to dm_video
Enable DM_VIDEO in config and don't overwrite console so it can be set
from environment
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
diff --git a/board/beckhoff/mx53cx9020/Makefile b/board/beckhoff/mx53cx9020/Makefile
index 423a553..7f15fc5 100644
--- a/board/beckhoff/mx53cx9020/Makefile
+++ b/board/beckhoff/mx53cx9020/Makefile
@@ -4,4 +4,4 @@
# Patrick Bruenn <p.bruenn@beckhoff.com>
obj-y += mx53cx9020.o
-obj-$(CONFIG_VIDEO) += mx53cx9020_video.o
+obj-$(CONFIG_DM_VIDEO) += mx53cx9020_video.o
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 79ea456..fdef447 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -23,8 +23,6 @@
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
#include <input.h>
#include <fs.h>
#include <dm/platform_data/serial_mxc.h>
@@ -232,15 +230,6 @@
return 0;
}
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
- return 1;
-}
-
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
index 85f1cda..bf47290 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
@@ -8,29 +8,34 @@
*/
#include <common.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
#include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/video.h>
#define CX9020_DVI_PWD IMX_GPIO_NR(6, 1)
-static struct fb_videomode const vga_640x480 = {
- .name = "VESA_VGA_640x480",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721, /* picosecond (25.175 MHz) */
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = NULL,
+ .mode = {
+ .name = "DVI",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721, /* picosecond (25.175 MHz) */
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
void setup_iomux_lcd(void)
{
@@ -39,11 +44,3 @@
gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD");
gpio_direction_output(CX9020_DVI_PWD, 1);
}
-
-int board_video_skip(void)
-{
- const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24);
- if (ret)
- printf("VESA VG 640x480 cannot be configured: %d\n", ret);
- return ret;
-}