ARM64: zynqmp: Modify the SD and QSPI bootmode values
Modify the SD bootmode value to 0x3 as per latest
spec. Also add new boot mode QSPI 32 bit boot mode
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index 5f4cfe3..5eec999 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -64,7 +64,10 @@
/* Bootmode setting values */
#define BOOT_MODES_MASK 0x0000000F
+#define QSPI_MODE_24BIT 0x00000001
+#define QSPI_MODE_32BIT 0x00000002
#define SD_MODE 0x00000003
+#define NAND_MODE 0x00000004
#define EMMC_MODE 0x00000006
#define JTAG_MODE 0x00000000
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 63c332f..cf8d6a4 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -83,6 +83,13 @@
bootmode = reg & BOOT_MODES_MASK;
switch (bootmode) {
+ case JTAG_MODE:
+ setenv("modeboot", "netboot");
+ break;
+ case QSPI_MODE_24BIT:
+ case QSPI_MODE_32BIT:
+ setenv("modeboot", "qspiboot");
+ break;
case SD_MODE:
case EMMC_MODE:
setenv("modeboot", "sdboot");