x86: ivybridge: Add early init for PCH devices
Many PCH devices are hard-coded to a particular PCI address. Set these
up early in case they are needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index c572f76..290a737 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -14,9 +14,30 @@
#include <pci.h>
+#define DEFAULT_GPIOBASE 0x0480
+#define DEFAULT_PMBASE 0x0500
+
+#define SMBUS_IO_BASE 0x0400
+
+#define PCH_EHCI1_DEV PCI_BDF(0, 0x1d, 0)
+#define PCH_EHCI2_DEV PCI_BDF(0, 0x1a, 0)
+#define PCH_XHCI_DEV PCI_BDF(0, 0x14, 0)
+#define PCH_ME_DEV PCI_BDF(0, 0x16, 0)
+#define PCH_PCIE_DEV_SLOT 28
+
+#define PCH_DEV PCI_BDF(0, 0, 0)
+#define PCH_VIDEO_DEV PCI_BDF(0, 2, 0)
+
/* PCI Configuration Space (D31:F0): LPC */
#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
+#define PMBASE 0x40
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0xDC
+#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
+#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
+#define GPIO_ROUT 0xb8
+
#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
#define LPC_EN 0x82 /* LPC IF Enables Register */
#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */
@@ -35,9 +56,35 @@
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
-#define DEFAULT_RCBA 0xfed1c000
+/* PCI Configuration Space (D31:F3): SMBus */
+#define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3)
+#define SMB_BASE 0x20
+#define HOSTC 0x40
+#define SMB_RCV_SLVA 0x09
+
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
+
+/* SMBus I/O bits. */
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
+
/* Root Complex Register Block */
+#define DEFAULT_RCBA 0xfed1c000
#define RCB_REG(reg) (DEFAULT_RCBA + (reg))
#define PCH_RCBA_BASE 0xf0
@@ -95,6 +142,78 @@
#define FD2 0x3428 /* 32bit */
#define CG 0x341c /* 32bit */
+/* ICH7 PMBASE */
+#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define BM_STS (1 << 4)
+#define TMROF_STS (1 << 0)
+#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define PM1_CNT 0x04
+#define SLP_EN (1 << 13)
+#define SLP_TYP (7 << 10)
+#define SLP_TYP_S0 0
+#define SLP_TYP_S1 1
+#define SLP_TYP_S3 5
+#define SLP_TYP_S4 6
+#define SLP_TYP_S5 7
+#define GBL_RLS (1 << 2)
+#define BM_RLD (1 << 1)
+#define SCI_EN (1 << 0)
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x50 /* mobile only */
+#define GPE0_STS 0x20
+#define PME_B0_STS (1 << 13)
+#define PME_STS (1 << 11)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define RI_STS (1 << 8)
+#define SMB_WAK_STS (1 << 7)
+#define TCOSCI_STS (1 << 6)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define GPE0_EN 0x28
+#define PME_B0_EN (1 << 13)
+#define PME_EN (1 << 11)
+#define TCOSCI_EN (1 << 6)
+#define SMI_EN 0x30
+#define INTEL_USB2_EN (1 << 18) /* Intel-Specific USB2 SMI logic */
+#define LEGACY_USB2_EN (1 << 17) /* Legacy USB2 SMI logic */
+#define PERIODIC_EN (1 << 14) /* SMI on PERIODIC_STS in SMI_STS */
+#define TCO_EN (1 << 13) /* Enable TCO Logic (BIOSWE et al) */
+#define MCSMI_EN (1 << 11) /* Trap microcontroller range access */
+#define BIOS_RLS (1 << 7) /* asserts SCI on bit set */
+#define SWSMI_TMR_EN (1 << 6) /* start software smi timer on bit set */
+#define APMC_EN (1 << 5) /* Writes to APM_CNT cause SMI# */
+#define SLP_SMI_EN (1 << 4) /* Write SLP_EN in PM1_CNT asserts SMI# */
+#define LEGACY_USB_EN (1 << 3) /* Legacy USB circuit SMI logic */
+#define BIOS_EN (1 << 2) /* Assert SMI# on setting GBL_RLS bit */
+#define EOS (1 << 1) /* End of SMI (deassert SMI#) */
+#define GBL_SMI_EN (1 << 0) /* SMI# generation at all? */
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+#define TCO1_STS 0x64
+#define DMISCI_STS (1 << 9)
+#define TCO2_STS 0x66
+
/**
* lpc_early_init() - set up LPC serial ports and other early things
*