diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile
new file mode 100644
index 0000000..3906bf9
--- /dev/null
+++ b/drivers/nand/Makefile
@@ -0,0 +1,17 @@
+include $(TOPDIR)/config.mk
+
+LIB := libnand.a
+
+OBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o
+all:	$(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
diff --git a/drivers/nand/diskonchip.c b/drivers/nand/diskonchip.c
new file mode 100644
index 0000000..02135c3
--- /dev/null
+++ b/drivers/nand/diskonchip.c
@@ -0,0 +1,1782 @@
+/* 
+ * drivers/mtd/nand/diskonchip.c
+ *
+ * (C) 2003 Red Hat, Inc.
+ * (C) 2004 Dan Brown <dan_brown@ieee.org>
+ * (C) 2004 Kalev Lember <kalev@smartlink.ee>
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ * Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org>
+ * Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee>
+ * 
+ * Error correction code lifted from the old docecc code
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Copyright (C) 2000 Netgem S.A.
+ * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
+ *  
+ * Interface to generic NAND code for M-Systems DiskOnChip devices
+ *
+ * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/rslib.h>
+#include <linux/moduleparam.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/inftl.h>
+
+/* Where to look for the devices? */
+#ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS
+#define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0
+#endif
+
+static unsigned long __initdata doc_locations[] = {
+#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
+	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 
+	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
+	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, 
+	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, 
+	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
+#else /*  CONFIG_MTD_DOCPROBE_HIGH */
+	0xc8000, 0xca000, 0xcc000, 0xce000, 
+	0xd0000, 0xd2000, 0xd4000, 0xd6000,
+	0xd8000, 0xda000, 0xdc000, 0xde000, 
+	0xe0000, 0xe2000, 0xe4000, 0xe6000, 
+	0xe8000, 0xea000, 0xec000, 0xee000,
+#endif /*  CONFIG_MTD_DOCPROBE_HIGH */
+#elif defined(__PPC__)
+	0xe4000000,
+#elif defined(CONFIG_MOMENCO_OCELOT)
+	0x2f000000,
+        0xff000000,
+#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
+        0xff000000,
+##else
+#warning Unknown architecture for DiskOnChip. No default probe locations defined
+#endif
+	0xffffffff };
+
+static struct mtd_info *doclist = NULL;
+
+struct doc_priv {
+	void __iomem *virtadr;
+	unsigned long physadr;
+	u_char ChipID;
+	u_char CDSNControl;
+	int chips_per_floor; /* The number of chips detected on each floor */
+	int curfloor;
+	int curchip;
+	int mh0_page;
+	int mh1_page;
+	struct mtd_info *nextdoc;
+};
+
+/* Max number of eraseblocks to scan (from start of device) for the (I)NFTL
+   MediaHeader.  The spec says to just keep going, I think, but that's just
+   silly. */
+#define MAX_MEDIAHEADER_SCAN 8
+
+/* This is the syndrome computed by the HW ecc generator upon reading an empty
+   page, one with all 0xff for data and stored ecc code. */
+static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
+/* This is the ecc value computed by the HW ecc generator upon writing an empty
+   page, one with all 0xff for data. */
+static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
+
+#define INFTL_BBT_RESERVED_BLOCKS 4
+
+#define DoC_is_MillenniumPlus(doc) ((doc)->ChipID == DOC_ChipID_DocMilPlus16 || (doc)->ChipID == DOC_ChipID_DocMilPlus32)
+#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil)
+#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd);
+static void doc200x_select_chip(struct mtd_info *mtd, int chip);
+
+static int debug=0;
+module_param(debug, int, 0);
+
+static int try_dword=1;
+module_param(try_dword, int, 0);
+
+static int no_ecc_failures=0;
+module_param(no_ecc_failures, int, 0);
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int no_autopart=0;
+module_param(no_autopart, int, 0);
+#endif
+
+#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
+static int inftl_bbt_write=1;
+#else
+static int inftl_bbt_write=0;
+#endif
+module_param(inftl_bbt_write, int, 0);
+
+static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS;
+module_param(doc_config_location, ulong, 0);
+MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
+
+
+/* Sector size for HW ECC */
+#define SECTOR_SIZE 512
+/* The sector bytes are packed into NB_DATA 10 bit words */
+#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / 10)
+/* Number of roots */
+#define NROOTS 4
+/* First consective root */
+#define FCR 510
+/* Number of symbols */
+#define NN 1023
+
+/* the Reed Solomon control structure */
+static struct rs_control *rs_decoder;
+
+/* 
+ * The HW decoder in the DoC ASIC's provides us a error syndrome,
+ * which we must convert to a standard syndrom usable by the generic
+ * Reed-Solomon library code.
+ *
+ * Fabrice Bellard figured this out in the old docecc code. I added
+ * some comments, improved a minor bit and converted it to make use
+ * of the generic Reed-Solomon libary. tglx
+ */
+static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
+{
+	int i, j, nerr, errpos[8];
+	uint8_t parity;
+	uint16_t ds[4], s[5], tmp, errval[8], syn[4];
+
+	/* Convert the ecc bytes into words */
+	ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
+	ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
+	ds[2] = ((ecc[2] & 0xf0) >> 4) | ((ecc[3] & 0x3f) << 4);
+	ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
+	parity = ecc[1];
+
+	/* Initialize the syndrom buffer */
+	for (i = 0; i < NROOTS; i++)
+		s[i] = ds[0];
+	/* 
+	 *  Evaluate 
+	 *  s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
+	 *  where x = alpha^(FCR + i)
+	 */
+	for(j = 1; j < NROOTS; j++) {
+		if(ds[j] == 0)
+			continue;
+		tmp = rs->index_of[ds[j]];
+		for(i = 0; i < NROOTS; i++)
+			s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
+	}
+
+	/* Calc s[i] = s[i] / alpha^(v + i) */
+	for (i = 0; i < NROOTS; i++) {
+		if (syn[i])
+ 			syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
+	}
+	/* Call the decoder library */
+	nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval);
+
+	/* Incorrectable errors ? */
+	if (nerr < 0)
+		return nerr;
+
+	/* 
+	 * Correct the errors. The bitpositions are a bit of magic,
+	 * but they are given by the design of the de/encoder circuit
+	 * in the DoC ASIC's.
+	 */
+	for(i = 0;i < nerr; i++) {
+		int index, bitpos, pos = 1015 - errpos[i];
+		uint8_t val;
+		if (pos >= NB_DATA && pos < 1019)
+			continue;
+		if (pos < NB_DATA) {
+			/* extract bit position (MSB first) */
+			pos = 10 * (NB_DATA - 1 - pos) - 6;
+			/* now correct the following 10 bits. At most two bytes
+			   can be modified since pos is even */
+			index = (pos >> 3) ^ 1;
+			bitpos = pos & 7;
+			if ((index >= 0 && index < SECTOR_SIZE) || 
+			    index == (SECTOR_SIZE + 1)) {
+				val = (uint8_t) (errval[i] >> (2 + bitpos));
+				parity ^= val;
+				if (index < SECTOR_SIZE)
+					data[index] ^= val;
+			}
+			index = ((pos >> 3) + 1) ^ 1;
+			bitpos = (bitpos + 10) & 7;
+			if (bitpos == 0)
+				bitpos = 8;
+			if ((index >= 0 && index < SECTOR_SIZE) || 
+			    index == (SECTOR_SIZE + 1)) {
+				val = (uint8_t)(errval[i] << (8 - bitpos));
+				parity ^= val;
+				if (index < SECTOR_SIZE)
+					data[index] ^= val;
+			}
+		}
+	}
+	/* If the parity is wrong, no rescue possible */
+	return parity ? -1 : nerr;
+}
+
+static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
+{
+	volatile char dummy;
+	int i;
+	
+	for (i = 0; i < cycles; i++) {
+		if (DoC_is_Millennium(doc))
+			dummy = ReadDOC(doc->virtadr, NOP);
+		else if (DoC_is_MillenniumPlus(doc))
+			dummy = ReadDOC(doc->virtadr, Mplus_NOP);
+		else
+			dummy = ReadDOC(doc->virtadr, DOCStatus);
+	}
+	
+}
+
+#define CDSN_CTRL_FR_B_MASK	(CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(struct doc_priv *doc)
+{
+        void __iomem *docptr = doc->virtadr;
+	unsigned long timeo = jiffies + (HZ * 10);
+
+	if(debug) printk("_DoC_WaitReady...\n");
+	/* Out-of-line routine to wait for chip response */
+	if (DoC_is_MillenniumPlus(doc)) {
+		while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+			if (time_after(jiffies, timeo)) {
+				printk("_DoC_WaitReady timed out.\n");
+				return -EIO;
+			}
+			udelay(1);
+			cond_resched();
+		}
+	} else {
+		while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+			if (time_after(jiffies, timeo)) {
+				printk("_DoC_WaitReady timed out.\n");
+				return -EIO;
+			}
+			udelay(1);
+			cond_resched();
+		}
+	}
+
+	return 0;
+}
+
+static inline int DoC_WaitReady(struct doc_priv *doc)
+{
+        void __iomem *docptr = doc->virtadr;
+	int ret = 0;
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		DoC_Delay(doc, 4);
+
+		if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK)
+			/* Call the out-of-line routine to wait */
+			ret = _DoC_WaitReady(doc);
+	} else {
+		DoC_Delay(doc, 4);
+
+		if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
+			/* Call the out-of-line routine to wait */
+			ret = _DoC_WaitReady(doc);
+		DoC_Delay(doc, 2);
+	}
+
+	if(debug) printk("DoC_WaitReady OK\n");
+	return ret;
+}
+
+static void doc2000_write_byte(struct mtd_info *mtd, u_char datum)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	if(debug)printk("write_byte %02x\n", datum);
+	WriteDOC(datum, docptr, CDSNSlowIO);
+	WriteDOC(datum, docptr, 2k_CDSN_IO);
+}
+
+static u_char doc2000_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	u_char ret;
+
+	ReadDOC(docptr, CDSNSlowIO);
+	DoC_Delay(doc, 2);
+	ret = ReadDOC(docptr, 2k_CDSN_IO);
+	if (debug) printk("read_byte returns %02x\n", ret);
+	return ret;
+}
+
+static void doc2000_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+	if (debug)printk("writebuf of %d bytes: ", len);
+	for (i=0; i < len; i++) {
+		WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+	if (debug) printk("\n");
+}
+
+static void doc2000_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+ 	int i;
+
+	if (debug)printk("readbuf of %d bytes: ", len);
+
+	for (i=0; i < len; i++) {
+		buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i);
+	}
+}
+
+static void doc2000_readbuf_dword(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+ 	int i;
+
+	if (debug) printk("readbuf_dword of %d bytes: ", len);
+
+	if (unlikely((((unsigned long)buf)|len) & 3)) {
+		for (i=0; i < len; i++) {
+			*(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
+		}
+	} else {
+		for (i=0; i < len; i+=4) {
+			*(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
+		}
+	}
+}
+
+static int doc2000_verifybuf(struct mtd_info *mtd, 
+			      const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	for (i=0; i < len; i++)
+		if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO))
+			return -EFAULT;
+	return 0;
+}
+
+static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	uint16_t ret;
+
+	doc200x_select_chip(mtd, nr);
+	doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
+	this->write_byte(mtd, NAND_CMD_READID);
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
+	doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
+	this->write_byte(mtd, 0);
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+
+	ret = this->read_byte(mtd) << 8;
+	ret |= this->read_byte(mtd);
+
+	if (doc->ChipID == DOC_ChipID_Doc2k && try_dword && !nr) {
+		/* First chip probe. See if we get same results by 32-bit access */
+		union {
+			uint32_t dword;
+			uint8_t byte[4];
+		} ident;
+		void __iomem *docptr = doc->virtadr;
+
+		doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
+		doc2000_write_byte(mtd, NAND_CMD_READID);
+		doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
+		doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
+		doc2000_write_byte(mtd, 0);
+		doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+
+		ident.dword = readl(docptr + DoC_2k_CDSN_IO);
+		if (((ident.byte[0] << 8) | ident.byte[1]) == ret) {
+			printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n");
+			this->read_buf = &doc2000_readbuf_dword;
+		}
+	}
+		
+	return ret;
+}
+
+static void __init doc2000_count_chips(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	uint16_t mfrid;
+	int i;
+
+	/* Max 4 chips per floor on DiskOnChip 2000 */
+	doc->chips_per_floor = 4;
+
+	/* Find out what the first chip is */
+	mfrid = doc200x_ident_chip(mtd, 0);
+
+	/* Find how many chips in each floor. */
+	for (i = 1; i < 4; i++) {
+		if (doc200x_ident_chip(mtd, i) != mfrid)
+			break;
+	}
+	doc->chips_per_floor = i;
+	printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
+}
+
+static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+	struct doc_priv *doc = this->priv;
+
+	int status;
+	
+	DoC_WaitReady(doc);
+	this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	DoC_WaitReady(doc);
+	status = (int)this->read_byte(mtd);
+
+	return status;
+}
+
+static void doc2001_write_byte(struct mtd_info *mtd, u_char datum)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	WriteDOC(datum, docptr, CDSNSlowIO);
+	WriteDOC(datum, docptr, Mil_CDSN_IO);
+	WriteDOC(datum, docptr, WritePipeTerm);
+}
+
+static u_char doc2001_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	//ReadDOC(docptr, CDSNSlowIO);
+	/* 11.4.5 -- delay twice to allow extended length cycle */
+	DoC_Delay(doc, 2);
+	ReadDOC(docptr, ReadPipeInit);
+	//return ReadDOC(docptr, Mil_CDSN_IO);
+	return ReadDOC(docptr, LastDataRead);
+}
+
+static void doc2001_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	for (i=0; i < len; i++)
+		WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+	/* Terminate write pipeline */
+	WriteDOC(0x00, docptr, WritePipeTerm);
+}
+
+static void doc2001_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	/* Start read pipeline */
+	ReadDOC(docptr, ReadPipeInit);
+
+	for (i=0; i < len-1; i++)
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
+
+	/* Terminate read pipeline */
+	buf[i] = ReadDOC(docptr, LastDataRead);
+}
+
+static int doc2001_verifybuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	/* Start read pipeline */
+	ReadDOC(docptr, ReadPipeInit);
+
+	for (i=0; i < len-1; i++)
+		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
+			ReadDOC(docptr, LastDataRead);
+			return i;
+		}
+	if (buf[i] != ReadDOC(docptr, LastDataRead))
+		return i;
+	return 0;
+}
+
+static u_char doc2001plus_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	u_char ret;
+
+        ReadDOC(docptr, Mplus_ReadPipeInit);
+        ReadDOC(docptr, Mplus_ReadPipeInit);
+        ret = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug) printk("read_byte returns %02x\n", ret);
+	return ret;
+}
+
+static void doc2001plus_writebuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("writebuf of %d bytes: ", len);
+	for (i=0; i < len; i++) {
+		WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+	if (debug) printk("\n");
+}
+
+static void doc2001plus_readbuf(struct mtd_info *mtd, 
+			    u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("readbuf of %d bytes: ", len);
+
+	/* Start read pipeline */
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	for (i=0; i < len-2; i++) {
+		buf[i] = ReadDOC(docptr, Mil_CDSN_IO);
+		if (debug && i < 16)
+			printk("%02x ", buf[i]);
+	}
+
+	/* Terminate read pipeline */
+	buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug && i < 16)
+		printk("%02x ", buf[len-2]);
+	buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead);
+	if (debug && i < 16)
+		printk("%02x ", buf[len-1]);
+	if (debug) printk("\n");
+}
+
+static int doc2001plus_verifybuf(struct mtd_info *mtd, 
+			     const u_char *buf, int len)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+
+	if (debug)printk("verifybuf of %d bytes: ", len);
+
+	/* Start read pipeline */
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+
+	for (i=0; i < len-2; i++)
+		if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
+			ReadDOC(docptr, Mplus_LastDataRead);
+			ReadDOC(docptr, Mplus_LastDataRead);
+			return i;
+		}
+	if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead))
+		return len-2;
+	if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead))
+		return len-1;
+	return 0;
+}
+
+static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int floor = 0;
+
+	if(debug)printk("select chip (%d)\n", chip);
+
+	if (chip == -1) {
+		/* Disable flash internally */
+		WriteDOC(0, docptr, Mplus_FlashSelect);
+		return;
+	}
+
+	floor = chip / doc->chips_per_floor;
+	chip -= (floor *  doc->chips_per_floor);
+
+	/* Assert ChipEnable and deassert WriteProtect */
+	WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect);
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	doc->curchip = chip;
+	doc->curfloor = floor;
+}
+
+static void doc200x_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int floor = 0;
+
+	if(debug)printk("select chip (%d)\n", chip);
+
+	if (chip == -1)
+		return;
+
+	floor = chip / doc->chips_per_floor;
+	chip -= (floor *  doc->chips_per_floor);
+
+	/* 11.4.4 -- deassert CE before changing chip */
+	doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE);
+
+	WriteDOC(floor, docptr, FloorSelect);
+	WriteDOC(chip, docptr, CDSNDeviceSelect);
+
+	doc200x_hwcontrol(mtd, NAND_CTL_SETNCE);
+
+	doc->curchip = chip;
+	doc->curfloor = floor;
+}
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	switch(cmd) {
+	case NAND_CTL_SETNCE:
+		doc->CDSNControl |= CDSN_CTRL_CE;
+		break;
+	case NAND_CTL_CLRNCE:
+		doc->CDSNControl &= ~CDSN_CTRL_CE;
+		break;
+	case NAND_CTL_SETCLE:
+		doc->CDSNControl |= CDSN_CTRL_CLE;
+		break;
+	case NAND_CTL_CLRCLE:
+		doc->CDSNControl &= ~CDSN_CTRL_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		doc->CDSNControl |= CDSN_CTRL_ALE;
+		break;
+	case NAND_CTL_CLRALE:
+		doc->CDSNControl &= ~CDSN_CTRL_ALE;
+		break;
+	case NAND_CTL_SETWP:
+		doc->CDSNControl |= CDSN_CTRL_WP;
+		break;
+	case NAND_CTL_CLRWP:
+		doc->CDSNControl &= ~CDSN_CTRL_WP;
+		break;
+	}
+	if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
+	WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+	/* 11.4.3 -- 4 NOPs after CSDNControl write */
+	DoC_Delay(doc, 4);
+}
+
+static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/*
+	 * Must terminate write pipeline before sending any commands
+	 * to the device.
+	 */
+	if (command == NAND_CMD_PAGEPROG) {
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+	}
+
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		WriteDOC(readcmd, docptr, Mplus_FlashCmd);
+	}
+	WriteDOC(command, docptr, Mplus_FlashCmd);
+	WriteDOC(0, docptr, Mplus_WritePipeTerm);
+	WriteDOC(0, docptr, Mplus_WritePipeTerm);
+
+	if (column != -1 || page_addr != -1) {
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			WriteDOC(column, docptr, Mplus_FlashAddress);
+		}
+		if (page_addr != -1) {
+			WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress);
+			WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
+			/* One more address cycle for higher density devices */
+			if (this->chipsize & 0x0c000000) {
+				WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
+				printk("high density\n");
+			}
+		}
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		/* deassert ALE */
+		if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID)
+			WriteDOC(0, docptr, Mplus_FlashControl);
+	}
+
+	/* 
+	 * program and erase have their own busy handlers
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)
+			break;
+		udelay(this->chip_delay);
+		WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		WriteDOC(0, docptr, Mplus_WritePipeTerm);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}
+	}
+
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+static int doc200x_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		/* 11.4.2 -- must NOP four times before checking FR/B# */
+		DoC_Delay(doc, 4);
+		if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+			if(debug)
+				printk("not ready\n");
+			return 0;
+		}
+		if (debug)printk("was ready\n");
+		return 1;
+	} else {
+		/* 11.4.2 -- must NOP four times before checking FR/B# */
+		DoC_Delay(doc, 4);
+		if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+			if(debug)
+				printk("not ready\n");
+			return 0;
+		}
+		/* 11.4.2 -- Must NOP twice if it's ready */
+		DoC_Delay(doc, 2);
+		if (debug)printk("was ready\n");
+		return 1;
+	}
+}
+
+static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	/* This is our last resort if we couldn't find or create a BBT.  Just
+	   pretend all blocks are good. */
+	return 0;
+}
+
+static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/* Prime the ECC engine */
+	switch(mode) {
+	case NAND_ECC_READ:
+		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC(DOC_ECC_EN, docptr, ECCConf);
+		break;
+	case NAND_ECC_WRITE:
+		WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
+		break;
+	}
+}
+
+static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+
+	/* Prime the ECC engine */
+	switch(mode) {
+	case NAND_ECC_READ:
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+		WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
+		break;
+	case NAND_ECC_WRITE:
+		WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+		WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf);
+		break;
+	}
+}
+
+/* This code is only called on write */
+static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				 unsigned char *ecc_code)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	int i;
+	int emptymatch = 1;
+
+	/* flush the pipeline */
+	if (DoC_is_2000(doc)) {
+		WriteDOC(doc->CDSNControl & ~CDSN_CTRL_FLASH_IO, docptr, CDSNControl);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(0, docptr, 2k_CDSN_IO);
+		WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+	} else if (DoC_is_MillenniumPlus(doc)) {
+		WriteDOC(0, docptr, Mplus_NOP);
+		WriteDOC(0, docptr, Mplus_NOP);
+		WriteDOC(0, docptr, Mplus_NOP);
+	} else {
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+		WriteDOC(0, docptr, NOP);
+	}
+
+	for (i = 0; i < 6; i++) {
+		if (DoC_is_MillenniumPlus(doc))
+			ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+		else 
+			ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+		if (ecc_code[i] != empty_write_ecc[i])
+			emptymatch = 0;
+	}
+	if (DoC_is_MillenniumPlus(doc))
+		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+	else
+		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+#if 0
+	/* If emptymatch=1, we might have an all-0xff data buffer.  Check. */
+	if (emptymatch) {
+		/* Note: this somewhat expensive test should not be triggered
+		   often.  It could be optimized away by examining the data in
+		   the writebuf routine, and remembering the result. */
+		for (i = 0; i < 512; i++) {
+			if (dat[i] == 0xff) continue;
+			emptymatch = 0;
+			break;
+		}
+	}
+	/* If emptymatch still =1, we do have an all-0xff data buffer.
+	   Return all-0xff ecc value instead of the computed one, so
+	   it'll look just like a freshly-erased page. */
+	if (emptymatch) memset(ecc_code, 0xff, 6);
+#endif
+	return 0;
+}
+
+static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+	int i, ret = 0;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+        void __iomem *docptr = doc->virtadr;
+	volatile u_char dummy;
+	int emptymatch = 1;
+	
+	/* flush the pipeline */
+	if (DoC_is_2000(doc)) {
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+		dummy = ReadDOC(docptr, 2k_ECCStatus);
+	} else if (DoC_is_MillenniumPlus(doc)) {
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+		dummy = ReadDOC(docptr, Mplus_ECCConf);
+	} else {
+		dummy = ReadDOC(docptr, ECCConf);
+		dummy = ReadDOC(docptr, ECCConf);
+		dummy = ReadDOC(docptr, ECCConf);
+	}
+	
+	/* Error occured ? */
+	if (dummy & 0x80) {
+		for (i = 0; i < 6; i++) {
+			if (DoC_is_MillenniumPlus(doc))
+				calc_ecc[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+			else
+				calc_ecc[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+			if (calc_ecc[i] != empty_read_syndrome[i])
+				emptymatch = 0;
+		}
+		/* If emptymatch=1, the read syndrome is consistent with an
+		   all-0xff data and stored ecc block.  Check the stored ecc. */
+		if (emptymatch) {
+			for (i = 0; i < 6; i++) {
+				if (read_ecc[i] == 0xff) continue;
+				emptymatch = 0;
+				break;
+			}
+		}
+		/* If emptymatch still =1, check the data block. */
+		if (emptymatch) {
+		/* Note: this somewhat expensive test should not be triggered
+		   often.  It could be optimized away by examining the data in
+		   the readbuf routine, and remembering the result. */
+			for (i = 0; i < 512; i++) {
+				if (dat[i] == 0xff) continue;
+				emptymatch = 0;
+				break;
+			}
+		}
+		/* If emptymatch still =1, this is almost certainly a freshly-
+		   erased block, in which case the ECC will not come out right.
+		   We'll suppress the error and tell the caller everything's
+		   OK.  Because it is. */
+		if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
+		if (ret > 0)
+			printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
+	}	
+	if (DoC_is_MillenniumPlus(doc))
+		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+	else
+		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+	if (no_ecc_failures && (ret == -1)) {
+		printk(KERN_ERR "suppressing ECC failure\n");
+		ret = 0;
+	}
+	return ret;
+}
+		
+//u_char mydatabuf[528];
+
+static struct nand_oobinfo doc200x_oobinfo = {
+        .useecc = MTD_NANDECC_AUTOPLACE,
+        .eccbytes = 6,
+        .eccpos = {0, 1, 2, 3, 4, 5},
+        .oobfree = { {8, 8} }
+};
+ 
+/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
+   On sucessful return, buf will contain a copy of the media header for
+   further processing.  id is the string to scan for, and will presumably be
+   either "ANAND" or "BNAND".  If findmirror=1, also look for the mirror media
+   header.  The page #s of the found media headers are placed in mh0_page and
+   mh1_page in the DOC private structure. */
+static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
+				     const char *id, int findmirror)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift);
+	int ret;
+	size_t retlen;
+
+	end = min(end, mtd->size); // paranoia
+	for (offs = 0; offs < end; offs += mtd->erasesize) {
+		ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
+		if (retlen != mtd->oobblock) continue;
+		if (ret) {
+			printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n",
+				offs);
+		}
+		if (memcmp(buf, id, 6)) continue;
+		printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs);
+		if (doc->mh0_page == -1) {
+			doc->mh0_page = offs >> this->page_shift;
+			if (!findmirror) return 1;
+			continue;
+		}
+		doc->mh1_page = offs >> this->page_shift;
+		return 2;
+	}
+	if (doc->mh0_page == -1) {
+		printk(KERN_WARNING "DiskOnChip %s Media Header not found.\n", id);
+		return 0;
+	}
+	/* Only one mediaheader was found.  We want buf to contain a
+	   mediaheader on return, so we'll have to re-read the one we found. */
+	offs = doc->mh0_page << this->page_shift;
+	ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
+	if (retlen != mtd->oobblock) {
+		/* Insanity.  Give up. */
+		printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
+		return 0;
+	}
+	return 1;
+}
+
+static inline int __init nftl_partscan(struct mtd_info *mtd,
+				struct mtd_partition *parts)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	int ret = 0;
+	u_char *buf;
+	struct NFTLMediaHeader *mh;
+	const unsigned psize = 1 << this->page_shift;
+	unsigned blocks, maxblocks;
+	int offs, numheaders;
+
+	buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
+		return 0;
+	}
+	if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
+	mh = (struct NFTLMediaHeader *) buf;
+
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+	printk(KERN_INFO "    DataOrgID        = %s\n"
+			 "    NumEraseUnits    = %d\n"
+			 "    FirstPhysicalEUN = %d\n"
+			 "    FormattedSize    = %d\n"
+			 "    UnitSizeFactor   = %d\n",
+		mh->DataOrgID, mh->NumEraseUnits,
+		mh->FirstPhysicalEUN, mh->FormattedSize,
+		mh->UnitSizeFactor);
+//#endif
+
+	blocks = mtd->size >> this->phys_erase_shift;
+	maxblocks = min(32768U, mtd->erasesize - psize);
+
+	if (mh->UnitSizeFactor == 0x00) {
+		/* Auto-determine UnitSizeFactor.  The constraints are:
+		   - There can be at most 32768 virtual blocks.
+		   - There can be at most (virtual block size - page size)
+		     virtual blocks (because MediaHeader+BBT must fit in 1).
+		*/
+		mh->UnitSizeFactor = 0xff;
+		while (blocks > maxblocks) {
+			blocks >>= 1;
+			maxblocks = min(32768U, (maxblocks << 1) + psize);
+			mh->UnitSizeFactor--;
+		}
+		printk(KERN_WARNING "UnitSizeFactor=0x00 detected.  Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor);
+	}
+
+	/* NOTE: The lines below modify internal variables of the NAND and MTD
+	   layers; variables with have already been configured by nand_scan.
+	   Unfortunately, we didn't know before this point what these values
+	   should be.  Thus, this code is somewhat dependant on the exact
+	   implementation of the NAND layer.  */
+	if (mh->UnitSizeFactor != 0xff) {
+		this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
+		mtd->erasesize <<= (0xff - mh->UnitSizeFactor);
+		printk(KERN_INFO "Setting virtual erase size to %d\n", mtd->erasesize);
+		blocks = mtd->size >> this->bbt_erase_shift;
+		maxblocks = min(32768U, mtd->erasesize - psize);
+	}
+
+	if (blocks > maxblocks) {
+		printk(KERN_ERR "UnitSizeFactor of 0x%02x is inconsistent with device size.  Aborting.\n", mh->UnitSizeFactor);
+		goto out;
+	}
+
+	/* Skip past the media headers. */
+	offs = max(doc->mh0_page, doc->mh1_page);
+	offs <<= this->page_shift;
+	offs += mtd->erasesize;
+
+	//parts[0].name = " DiskOnChip Boot / Media Header partition";
+	//parts[0].offset = 0;
+	//parts[0].size = offs;
+
+	parts[0].name = " DiskOnChip BDTL partition";
+	parts[0].offset = offs;
+	parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+
+	offs += parts[0].size;
+	if (offs < mtd->size) {
+		parts[1].name = " DiskOnChip Remainder partition";
+		parts[1].offset = offs;
+		parts[1].size = mtd->size - offs;
+		ret = 2;
+		goto out;
+	}
+	ret = 1;
+out:
+	kfree(buf);
+	return ret;
+}
+
+/* This is a stripped-down copy of the code in inftlmount.c */
+static inline int __init inftl_partscan(struct mtd_info *mtd,
+				 struct mtd_partition *parts)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	int ret = 0;
+	u_char *buf;
+	struct INFTLMediaHeader *mh;
+	struct INFTLPartition *ip;
+	int numparts = 0;
+	int blocks;
+	int vshift, lastvunit = 0;
+	int i;
+	int end = mtd->size;
+
+	if (inftl_bbt_write)
+		end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift);
+
+	buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
+		return 0;
+	}
+
+	if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out;
+	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
+	mh = (struct INFTLMediaHeader *) buf;
+
+	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
+	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
+	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
+	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
+	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
+	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+ 
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+	printk(KERN_INFO "    bootRecordID          = %s\n"
+			 "    NoOfBootImageBlocks   = %d\n"
+			 "    NoOfBinaryPartitions  = %d\n"
+			 "    NoOfBDTLPartitions    = %d\n"
+			 "    BlockMultiplerBits    = %d\n"
+			 "    FormatFlgs            = %d\n"
+			 "    OsakVersion           = %d.%d.%d.%d\n"
+			 "    PercentUsed           = %d\n",
+		mh->bootRecordID, mh->NoOfBootImageBlocks,
+		mh->NoOfBinaryPartitions,
+		mh->NoOfBDTLPartitions,
+		mh->BlockMultiplierBits, mh->FormatFlags,
+		((unsigned char *) &mh->OsakVersion)[0] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[1] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[2] & 0xf,
+		((unsigned char *) &mh->OsakVersion)[3] & 0xf,
+		mh->PercentUsed);
+//#endif
+
+	vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
+
+	blocks = mtd->size >> vshift;
+	if (blocks > 32768) {
+		printk(KERN_ERR "BlockMultiplierBits=%d is inconsistent with device size.  Aborting.\n", mh->BlockMultiplierBits);
+		goto out;
+	}
+
+	blocks = doc->chips_per_floor << (this->chip_shift - this->phys_erase_shift);
+	if (inftl_bbt_write && (blocks > mtd->erasesize)) {
+		printk(KERN_ERR "Writeable BBTs spanning more than one erase block are not yet supported.  FIX ME!\n");
+		goto out;
+	}
+
+	/* Scan the partitions */
+	for (i = 0; (i < 4); i++) {
+		ip = &(mh->Partitions[i]);
+		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
+		ip->firstUnit = le32_to_cpu(ip->firstUnit);
+		ip->lastUnit = le32_to_cpu(ip->lastUnit);
+		ip->flags = le32_to_cpu(ip->flags);
+		ip->spareUnits = le32_to_cpu(ip->spareUnits);
+		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+
+//#ifdef CONFIG_MTD_DEBUG_VERBOSE
+//		if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+		printk(KERN_INFO	"    PARTITION[%d] ->\n"
+			"        virtualUnits    = %d\n"
+			"        firstUnit       = %d\n"
+			"        lastUnit        = %d\n"
+			"        flags           = 0x%x\n"
+			"        spareUnits      = %d\n",
+			i, ip->virtualUnits, ip->firstUnit,
+			ip->lastUnit, ip->flags,
+			ip->spareUnits);
+//#endif
+
+/*
+		if ((i == 0) && (ip->firstUnit > 0)) {
+			parts[0].name = " DiskOnChip IPL / Media Header partition";
+			parts[0].offset = 0;
+			parts[0].size = mtd->erasesize * ip->firstUnit;
+			numparts = 1;
+		}
+*/
+
+		if (ip->flags & INFTL_BINARY)
+			parts[numparts].name = " DiskOnChip BDK partition";
+		else
+			parts[numparts].name = " DiskOnChip BDTL partition";
+		parts[numparts].offset = ip->firstUnit << vshift;
+		parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift;
+		numparts++;
+		if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit;
+		if (ip->flags & INFTL_LAST) break;
+	}
+	lastvunit++;
+	if ((lastvunit << vshift) < end) {
+		parts[numparts].name = " DiskOnChip Remainder partition";
+		parts[numparts].offset = lastvunit << vshift;
+		parts[numparts].size = end - parts[numparts].offset;
+		numparts++;
+	}
+	ret = numparts;
+out:
+	kfree(buf);
+	return ret;
+}
+
+static int __init nftl_scan_bbt(struct mtd_info *mtd)
+{
+	int ret, numparts;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	struct mtd_partition parts[2];
+
+	memset((char *) parts, 0, sizeof(parts));
+	/* On NFTL, we have to find the media headers before we can read the
+	   BBTs, since they're stored in the media header eraseblocks. */
+	numparts = nftl_partscan(mtd, parts);
+	if (!numparts) return -EIO;
+	this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+				NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+				NAND_BBT_VERSION;
+	this->bbt_td->veroffs = 7;
+	this->bbt_td->pages[0] = doc->mh0_page + 1;
+	if (doc->mh1_page != -1) {
+		this->bbt_md->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+					NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+					NAND_BBT_VERSION;
+		this->bbt_md->veroffs = 7;
+		this->bbt_md->pages[0] = doc->mh1_page + 1;
+	} else {
+		this->bbt_md = NULL;
+	}
+
+	/* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
+	   At least as nand_bbt.c is currently written. */
+	if ((ret = nand_scan_bbt(mtd, NULL)))
+		return ret;
+	add_mtd_device(mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+	if (!no_autopart)
+		add_mtd_partitions(mtd, parts, numparts);
+#endif
+	return 0;
+}
+
+static int __init inftl_scan_bbt(struct mtd_info *mtd)
+{
+	int ret, numparts;
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+	struct mtd_partition parts[5];
+
+	if (this->numchips > doc->chips_per_floor) {
+		printk(KERN_ERR "Multi-floor INFTL devices not yet supported.\n");
+		return -EIO;
+	}
+
+	if (DoC_is_MillenniumPlus(doc)) {
+		this->bbt_td->options = NAND_BBT_2BIT | NAND_BBT_ABSPAGE;
+		if (inftl_bbt_write)
+			this->bbt_td->options |= NAND_BBT_WRITE;
+		this->bbt_td->pages[0] = 2;
+		this->bbt_md = NULL;
+	} else {
+		this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
+					NAND_BBT_VERSION;
+		if (inftl_bbt_write)
+			this->bbt_td->options |= NAND_BBT_WRITE;
+		this->bbt_td->offs = 8;
+		this->bbt_td->len = 8;
+		this->bbt_td->veroffs = 7;
+		this->bbt_td->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+		this->bbt_td->reserved_block_code = 0x01;
+		this->bbt_td->pattern = "MSYS_BBT";
+
+		this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
+					NAND_BBT_VERSION;
+		if (inftl_bbt_write)
+			this->bbt_md->options |= NAND_BBT_WRITE;
+		this->bbt_md->offs = 8;
+		this->bbt_md->len = 8;
+		this->bbt_md->veroffs = 7;
+		this->bbt_md->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+		this->bbt_md->reserved_block_code = 0x01;
+		this->bbt_md->pattern = "TBB_SYSM";
+	}
+
+	/* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
+	   At least as nand_bbt.c is currently written. */
+	if ((ret = nand_scan_bbt(mtd, NULL)))
+		return ret;
+	memset((char *) parts, 0, sizeof(parts));
+	numparts = inftl_partscan(mtd, parts);
+	/* At least for now, require the INFTL Media Header.  We could probably
+	   do without it for non-INFTL use, since all it gives us is
+	   autopartitioning, but I want to give it more thought. */
+	if (!numparts) return -EIO;
+	add_mtd_device(mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+	if (!no_autopart)
+		add_mtd_partitions(mtd, parts, numparts);
+#endif
+	return 0;
+}
+
+static inline int __init doc2000_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = doc2000_write_byte;
+	this->read_byte = doc2000_read_byte;
+	this->write_buf = doc2000_writebuf;
+	this->read_buf = doc2000_readbuf;
+	this->verify_buf = doc2000_verifybuf;
+	this->scan_bbt = nftl_scan_bbt;
+
+	doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO;
+	doc2000_count_chips(mtd);
+	mtd->name = "DiskOnChip 2000 (NFTL Model)";
+	return (4 * doc->chips_per_floor);
+}
+
+static inline int __init doc2001_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = doc2001_write_byte;
+	this->read_byte = doc2001_read_byte;
+	this->write_buf = doc2001_writebuf;
+	this->read_buf = doc2001_readbuf;
+	this->verify_buf = doc2001_verifybuf;
+
+	ReadDOC(doc->virtadr, ChipID);
+	ReadDOC(doc->virtadr, ChipID);
+	ReadDOC(doc->virtadr, ChipID);
+	if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) {
+		/* It's not a Millennium; it's one of the newer
+		   DiskOnChip 2000 units with a similar ASIC. 
+		   Treat it like a Millennium, except that it
+		   can have multiple chips. */
+		doc2000_count_chips(mtd);
+		mtd->name = "DiskOnChip 2000 (INFTL Model)";
+		this->scan_bbt = inftl_scan_bbt;
+		return (4 * doc->chips_per_floor);
+	} else {
+		/* Bog-standard Millennium */
+		doc->chips_per_floor = 1;
+		mtd->name = "DiskOnChip Millennium";
+		this->scan_bbt = nftl_scan_bbt;
+		return 1;
+	}
+}
+
+static inline int __init doc2001plus_init(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	struct doc_priv *doc = this->priv;
+
+	this->write_byte = NULL;
+	this->read_byte = doc2001plus_read_byte;
+	this->write_buf = doc2001plus_writebuf;
+	this->read_buf = doc2001plus_readbuf;
+	this->verify_buf = doc2001plus_verifybuf;
+	this->scan_bbt = inftl_scan_bbt;
+	this->hwcontrol = NULL;
+	this->select_chip = doc2001plus_select_chip;
+	this->cmdfunc = doc2001plus_command;
+	this->enable_hwecc = doc2001plus_enable_hwecc;
+
+	doc->chips_per_floor = 1;
+	mtd->name = "DiskOnChip Millennium Plus";
+
+	return 1;
+}
+
+static inline int __init doc_probe(unsigned long physadr)
+{
+	unsigned char ChipID;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	struct doc_priv *doc;
+	void __iomem *virtadr;
+	unsigned char save_control;
+	unsigned char tmp, tmpb, tmpc;
+	int reg, len, numchips;
+	int ret = 0;
+
+	virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
+	if (!virtadr) {
+		printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr);
+		return -EIO;
+	}
+
+	/* It's not possible to cleanly detect the DiskOnChip - the
+	 * bootup procedure will put the device into reset mode, and
+	 * it's not possible to talk to it without actually writing
+	 * to the DOCControl register. So we store the current contents
+	 * of the DOCControl register's location, in case we later decide
+	 * that it's not a DiskOnChip, and want to put it back how we
+	 * found it. 
+	 */
+	save_control = ReadDOC(virtadr, DOCControl);
+
+	/* Reset the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 virtadr, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+		 virtadr, DOCControl);
+
+	/* Enable the DiskOnChip ASIC */
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 virtadr, DOCControl);
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+		 virtadr, DOCControl);
+
+	ChipID = ReadDOC(virtadr, ChipID);
+
+	switch(ChipID) {
+	case DOC_ChipID_Doc2k:
+		reg = DoC_2k_ECCStatus;
+		break;
+	case DOC_ChipID_DocMil:
+		reg = DoC_ECCConf;
+		break;
+	case DOC_ChipID_DocMilPlus16:
+	case DOC_ChipID_DocMilPlus32:
+	case 0:
+		/* Possible Millennium Plus, need to do more checks */
+		/* Possibly release from power down mode */
+		for (tmp = 0; (tmp < 4); tmp++)
+			ReadDOC(virtadr, Mplus_Power);
+
+		/* Reset the Millennium Plus ASIC */
+		tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, virtadr, Mplus_DOCControl);
+		WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+
+		mdelay(1);
+		/* Enable the Millennium Plus ASIC */
+		tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
+			DOC_MODE_BDECT;
+		WriteDOC(tmp, virtadr, Mplus_DOCControl);
+		WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+		mdelay(1);
+
+		ChipID = ReadDOC(virtadr, ChipID);
+
+		switch (ChipID) {
+		case DOC_ChipID_DocMilPlus16:
+			reg = DoC_Mplus_Toggle;
+			break;
+		case DOC_ChipID_DocMilPlus32:
+			printk(KERN_ERR "DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
+		default:
+			ret = -ENODEV;
+			goto notfound;
+		}
+		break;
+
+	default:
+		ret = -ENODEV;
+		goto notfound;
+	}
+	/* Check the TOGGLE bit in the ECC register */
+	tmp  = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+	if ((tmp == tmpb) || (tmp != tmpc)) {
+		printk(KERN_WARNING "Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr);
+		ret = -ENODEV;
+		goto notfound;
+	}
+
+	for (mtd = doclist; mtd; mtd = doc->nextdoc) {
+		unsigned char oldval;
+		unsigned char newval;
+		nand = mtd->priv;
+		doc = nand->priv;
+		/* Use the alias resolution register to determine if this is
+		   in fact the same DOC aliased to a new address.  If writes
+		   to one chip's alias resolution register change the value on
+		   the other chip, they're the same chip. */
+		if (ChipID == DOC_ChipID_DocMilPlus16) {
+			oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+			newval = ReadDOC(virtadr, Mplus_AliasResolution);
+		} else {
+			oldval = ReadDOC(doc->virtadr, AliasResolution);
+			newval = ReadDOC(virtadr, AliasResolution);
+		}
+		if (oldval != newval)
+			continue;
+		if (ChipID == DOC_ChipID_DocMilPlus16) {
+			WriteDOC(~newval, virtadr, Mplus_AliasResolution);
+			oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+			WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+		} else {
+			WriteDOC(~newval, virtadr, AliasResolution);
+			oldval = ReadDOC(doc->virtadr, AliasResolution);
+			WriteDOC(newval, virtadr, AliasResolution); // restore it
+		}
+		newval = ~newval;
+		if (oldval == newval) {
+			printk(KERN_DEBUG "Found alias of DOC at 0x%lx to 0x%lx\n", doc->physadr, physadr);
+			goto notfound;
+		}
+	}
+
+	printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr);
+
+	len = sizeof(struct mtd_info) +
+	      sizeof(struct nand_chip) +
+	      sizeof(struct doc_priv) +
+	      (2 * sizeof(struct nand_bbt_descr));
+	mtd =  kmalloc(len, GFP_KERNEL);
+	if (!mtd) {
+		printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
+		ret = -ENOMEM;
+		goto fail;
+	}
+	memset(mtd, 0, len);
+
+	nand			= (struct nand_chip *) (mtd + 1);
+	doc			= (struct doc_priv *) (nand + 1);
+	nand->bbt_td		= (struct nand_bbt_descr *) (doc + 1);
+	nand->bbt_md		= nand->bbt_td + 1;
+
+	mtd->priv		= nand;
+	mtd->owner		= THIS_MODULE;
+
+	nand->priv		= doc;
+	nand->select_chip	= doc200x_select_chip;
+	nand->hwcontrol		= doc200x_hwcontrol;
+	nand->dev_ready		= doc200x_dev_ready;
+	nand->waitfunc		= doc200x_wait;
+	nand->block_bad		= doc200x_block_bad;
+	nand->enable_hwecc	= doc200x_enable_hwecc;
+	nand->calculate_ecc	= doc200x_calculate_ecc;
+	nand->correct_data	= doc200x_correct_data;
+
+	nand->autooob		= &doc200x_oobinfo;
+	nand->eccmode		= NAND_ECC_HW6_512;
+	nand->options		= NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME;
+
+	doc->physadr		= physadr;
+	doc->virtadr		= virtadr;
+	doc->ChipID		= ChipID;
+	doc->curfloor		= -1;
+	doc->curchip		= -1;
+	doc->mh0_page		= -1;
+	doc->mh1_page		= -1;
+	doc->nextdoc		= doclist;
+
+	if (ChipID == DOC_ChipID_Doc2k)
+		numchips = doc2000_init(mtd);
+	else if (ChipID == DOC_ChipID_DocMilPlus16)
+		numchips = doc2001plus_init(mtd);
+	else
+		numchips = doc2001_init(mtd);
+
+	if ((ret = nand_scan(mtd, numchips))) {
+		/* DBB note: i believe nand_release is necessary here, as
+		   buffers may have been allocated in nand_base.  Check with
+		   Thomas. FIX ME! */
+		/* nand_release will call del_mtd_device, but we haven't yet
+		   added it.  This is handled without incident by
+		   del_mtd_device, as far as I can tell. */
+		nand_release(mtd);
+		kfree(mtd);
+		goto fail;
+	}
+
+	/* Success! */
+	doclist = mtd;
+	return 0;
+
+notfound:
+	/* Put back the contents of the DOCControl register, in case it's not
+	   actually a DiskOnChip.  */
+	WriteDOC(save_control, virtadr, DOCControl);
+fail:
+	iounmap(virtadr);
+	return ret;
+}
+
+static void release_nanddoc(void)
+{
+ 	struct mtd_info *mtd, *nextmtd;
+	struct nand_chip *nand;
+	struct doc_priv *doc;
+
+	for (mtd = doclist; mtd; mtd = nextmtd) {
+		nand = mtd->priv;
+		doc = nand->priv;
+
+		nextmtd = doc->nextdoc;
+		nand_release(mtd);
+		iounmap(doc->virtadr);
+		kfree(mtd);
+	}
+}
+
+static int __init init_nanddoc(void)
+{
+	int i, ret = 0;
+
+	/* We could create the decoder on demand, if memory is a concern.
+	 * This way we have it handy, if an error happens 
+	 *
+	 * Symbolsize is 10 (bits)
+	 * Primitve polynomial is x^10+x^3+1
+	 * first consecutive root is 510
+	 * primitve element to generate roots = 1
+	 * generator polinomial degree = 4
+	 */
+	rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
+ 	if (!rs_decoder) {
+		printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
+		return -ENOMEM;
+	}
+
+	if (doc_config_location) {
+		printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location);
+		ret = doc_probe(doc_config_location);
+		if (ret < 0)
+			goto outerr;
+	} else {
+		for (i=0; (doc_locations[i] != 0xffffffff); i++) {
+			doc_probe(doc_locations[i]);
+		}
+	}
+	/* No banner message any more. Print a message if no DiskOnChip
+	   found, so the user knows we at least tried. */
+	if (!doclist) {
+		printk(KERN_INFO "No valid DiskOnChip devices found\n");
+		ret = -ENODEV;
+		goto outerr;
+	}
+	return 0;
+outerr:
+	free_rs(rs_decoder);
+	return ret;
+}
+
+static void __exit cleanup_nanddoc(void)
+{
+	/* Cleanup the nand/DoC resources */
+	release_nanddoc();
+
+	/* Free the reed solomon resources */
+	if (rs_decoder) {
+		free_rs(rs_decoder);
+	}
+}
+
+module_init(init_nanddoc);
+module_exit(cleanup_nanddoc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver\n");
diff --git a/drivers/nand/nand.c b/drivers/nand/nand.c
new file mode 100644
index 0000000..d187c89
--- /dev/null
+++ b/drivers/nand/nand.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2005
+ * 2N Telekomunikace, a.s. <www.2n.cz>
+ * Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+
+#ifndef CFG_NAND_BASE_LIST
+#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+#endif
+
+int nand_curr_device = -1;
+nand_info_t nand_info[CFG_MAX_NAND_DEVICE];
+
+static struct nand_chip nand_chip[CFG_MAX_NAND_DEVICE];
+static ulong base_address[CFG_MAX_NAND_DEVICE] = CFG_NAND_BASE_LIST;
+
+static const char default_nand_name[] = "nand";
+
+extern void board_nand_init(struct nand_chip *nand);
+
+static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand,
+			   ulong base_addr)
+{
+	mtd->priv = nand;
+
+	nand->IO_ADDR_R = nand->IO_ADDR_W = base_addr;
+	board_nand_init(nand);
+
+	if (nand_scan(mtd, 1) == 0) {
+		if (!mtd->name)
+			mtd->name = default_nand_name;
+	} else
+		mtd->name = NULL;
+
+}
+
+void nand_init(void)
+{
+	int i;
+
+	for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+		nand_init_chip(&nand_info[i], &nand_chip[i], base_address[i]);
+		if (nand_curr_device == -1)
+			nand_curr_device = i;
+	}
+}
+
+#endif
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
new file mode 100644
index 0000000..c423512
--- /dev/null
+++ b/drivers/nand/nand_base.c
@@ -0,0 +1,2630 @@
+/*
+ *  drivers/mtd/nand.c
+ *
+ *  Overview:
+ *   This is the generic MTD driver for NAND flash devices. It should be
+ *   capable of working with almost all NAND chips currently available.
+ *   Basic support for AG-AND chips is provided.
+ *   
+ *	Additional technical information is available on
+ *	http://www.linux-mtd.infradead.org/tech/nand.html
+ *	
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 		  2002 Thomas Gleixner (tglx@linutronix.de)
+ *
+ *  02-08-2004  tglx: support for strange chips, which cannot auto increment 
+ *		pages on read / read_oob
+ *
+ *  03-17-2004  tglx: Check ready before auto increment check. Simon Bayes
+ *		pointed this out, as he marked an auto increment capable chip
+ *		as NOAUTOINCR in the board driver.
+ *		Make reads over block boundaries work too
+ *
+ *  04-14-2004	tglx: first working version for 2k page size chips
+ *  
+ *  05-19-2004  tglx: Basic support for Renesas AG-AND chips
+ *
+ *  09-24-2004  tglx: add support for hardware controllers (e.g. ECC) shared
+ *		among multiple independend devices. Suggestions and initial patch
+ *		from Ben Dooks <ben-mtd@fluff.org>
+ *
+ * Credits:
+ *	David Woodhouse for adding multichip support  
+ *	
+ *	Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ *	rework for 2K page size chips
+ *
+ * TODO:
+ *	Enable cached programming for 2k page size chips
+ *	Check, if mtd->ecctype should be set to MTD_ECC_HW
+ *	if we have HW ecc support.
+ *	The AG-AND chips have nice features for speed improvement,
+ *	which are not supported yet. Read / program 4 pages in one go.
+ *
+ * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* XXX U-BOOT XXX */
+#if 0
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/partitions.h>
+#endif
+
+#else
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <malloc.h>
+#include <watchdog.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#ifdef CONFIG_JFFS2_NAND
+#include <jffs2/jffs2.h>
+#endif
+
+#endif
+
+/* Define default oob placement schemes for large and small page devices */
+static struct nand_oobinfo nand_oob_8 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 3,
+	.eccpos = {0, 1, 2},
+	.oobfree = { {3, 2}, {6, 2} }
+};
+
+static struct nand_oobinfo nand_oob_16 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 6,
+	.eccpos = {0, 1, 2, 3, 6, 7},
+	.oobfree = { {8, 8} }
+};
+
+static struct nand_oobinfo nand_oob_64 = {
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 24,
+	.eccpos = {
+		40, 41, 42, 43, 44, 45, 46, 47, 
+		48, 49, 50, 51, 52, 53, 54, 55, 
+		56, 57, 58, 59, 60, 61, 62, 63},
+	.oobfree = { {2, 38} }
+};
+
+/* This is used for padding purposes in nand_write_oob */
+static u_char ffchars[] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+};
+
+/*
+ * NAND low-level MTD interface functions
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
+
+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
+/* XXX U-BOOT XXX */
+#if 0
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t * retlen);
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+#endif
+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr);
+static void nand_sync (struct mtd_info *mtd);
+
+/* Some internal functions */
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
+		struct nand_oobinfo *oobsel, int mode);
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
+#else
+#define nand_verify_pages(...) (0)
+#endif
+		
+static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
+
+/**
+ * nand_release_device - [GENERIC] release chip
+ * @mtd:	MTD device structure
+ * 
+ * Deselect, release chip lock and wake up anyone waiting on the device 
+ */
+/* XXX U-BOOT XXX */
+#if 0
+static void nand_release_device (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* De-select the NAND device */
+	this->select_chip(mtd, -1);
+	/* Do we have a hardware controller ? */
+	if (this->controller) {
+		spin_lock(&this->controller->lock);
+		this->controller->active = NULL;
+		spin_unlock(&this->controller->lock);
+	}
+	/* Release the chip */
+	spin_lock (&this->chip_lock);
+	this->state = FL_READY;
+	wake_up (&this->wq);
+	spin_unlock (&this->chip_lock);
+}
+#else
+#define nand_release_device(mtd)	do {} while(0)
+#endif
+
+/**
+ * nand_read_byte - [DEFAULT] read one byte from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 8bit buswith
+ */
+static u_char nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return readb(this->IO_ADDR_R);
+}
+
+/**
+ * nand_write_byte - [DEFAULT] write one byte to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ * Default write function for 8it buswith
+ */
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writeb(byte, this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 16bit buswith with 
+ * endianess conversion
+ */
+static u_char nand_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip
+ * @mtd:	MTD device structure
+ * @byte:	pointer to data byte to write
+ *
+ * Default write function for 16bit buswith with
+ * endianess conversion
+ */
+static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_word - [DEFAULT] read one word from the chip
+ * @mtd:	MTD device structure
+ *
+ * Default read function for 16bit buswith without 
+ * endianess conversion
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return readw(this->IO_ADDR_R);
+}
+
+/**
+ * nand_write_word - [DEFAULT] write one word to the chip
+ * @mtd:	MTD device structure
+ * @word:	data word to write
+ *
+ * Default write function for 16bit buswith without 
+ * endianess conversion
+ */
+static void nand_write_word(struct mtd_info *mtd, u16 word)
+{
+	struct nand_chip *this = mtd->priv;
+	writew(word, this->IO_ADDR_W);
+}
+
+/**
+ * nand_select_chip - [DEFAULT] control CE line
+ * @mtd:	MTD device structure
+ * @chip:	chipnumber to select, -1 for deselect
+ *
+ * Default select function for 1 chip devices.
+ */
+static void nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	switch(chip) {
+	case -1:
+		this->hwcontrol(mtd, NAND_CTL_CLRNCE);	
+		break;
+	case 0:
+		this->hwcontrol(mtd, NAND_CTL_SETNCE);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/**
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ * Default write function for 8bit buswith
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		writeb(buf[i], this->IO_ADDR_W);
+}
+
+/**
+ * nand_read_buf - [DEFAULT] read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ * Default read function for 8bit buswith
+ */
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		buf[i] = readb(this->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ * Default verify function for 8bit buswith
+ */
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != readb(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @mtd:	MTD device structure
+ * @buf:	data buffer
+ * @len:	number of bytes to write
+ *
+ * Default write function for 16bit buswith
+ */
+static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+	
+	for (i=0; i<len; i++)
+		writew(p[i], this->IO_ADDR_W);
+		
+}
+
+/**
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer to store date
+ * @len:	number of bytes to read
+ *
+ * Default read function for 16bit buswith
+ */
+static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++)
+		p[i] = readw(this->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer 
+ * @mtd:	MTD device structure
+ * @buf:	buffer containing the data to compare
+ * @len:	number of bytes to compare
+ *
+ * Default verify function for 16bit buswith
+ */
+static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i=0; i<len; i++)
+		if (p[i] != readw(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ * @getchip:	0, if the chip is already selected
+ *
+ * Check, if the block is bad. 
+ */
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	int page, chipnr, res = 0;
+	struct nand_chip *this = mtd->priv;
+	u16 bad;
+
+	if (getchip) {
+		page = (int)(ofs >> this->page_shift);
+		chipnr = (int)(ofs >> this->chip_shift);
+
+		/* Grab the lock and see if the device is available */
+		nand_get_device (this, mtd, FL_READING);
+
+		/* Select the NAND device */
+		this->select_chip(mtd, chipnr);
+	} else 
+		page = (int) ofs;	
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
+		bad = cpu_to_le16(this->read_word(mtd));
+		if (this->badblockpos & 0x1)
+			bad >>= 1;
+		if ((bad & 0xFF) != 0xff)
+			res = 1;
+	} else {
+		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
+		if (this->read_byte(mtd) != 0xff)
+			res = 1;
+	}
+		
+	if (getchip) {
+		/* Deselect and wake up anyone waiting on the device */
+		nand_release_device(mtd);
+	}	
+	
+	return res;
+}
+
+/**
+ * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+*/
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *this = mtd->priv;
+	u_char buf[2] = {0, 0};
+	size_t	retlen;
+	int block;
+	
+	/* Get block number */
+	block = ((int) ofs) >> this->bbt_erase_shift;
+	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+	/* Do we have a flash based bad block table ? */
+	if (this->options & NAND_USE_FLASH_BBT)
+		return nand_update_bbt (mtd, ofs);
+		
+	/* We write two bytes, so we dont have to mess with 16 bit access */
+	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
+	return nand_write_oob (mtd, ofs , 2, &retlen, buf);
+}
+
+/** 
+ * nand_check_wp - [GENERIC] check if the chip is write protected
+ * @mtd:	MTD device structure
+ * Check, if the device is write protected 
+ *
+ * The function expects, that the device is already selected 
+ */
+static int nand_check_wp (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Check the WP bit */
+	this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+	return (this->read_byte(mtd) & 0x80) ? 0 : 1; 
+}
+
+/**
+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset from device start
+ * @getchip:	0, if the chip is already selected
+ * @allowbbt:	1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+{
+	struct nand_chip *this = mtd->priv;
+	
+	if (!this->bbt)
+		return this->block_bad(mtd, ofs, getchip);
+	
+	/* Return info from the table */
+	return nand_isbad_bbt (mtd, ofs, allowbbt);
+}
+
+/**
+ * nand_command - [DEFAULT] Send command to NAND device
+ * @mtd:	MTD device structure
+ * @command:	the command to be sent
+ * @column:	the column address for this command, -1 if none
+ * @page_addr:	the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This function is used for small page
+ * devices (256/512 Bytes per page)
+ */
+static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		this->write_byte(mtd, readcmd);
+	}
+	this->write_byte(mtd, command);
+
+	/* Set ALE and clear CLE to start address cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			this->write_byte(mtd, column);
+		}
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for devices > 32MiB */
+			if (this->chipsize > (32 << 20))
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		udelay(this->chip_delay);
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+/**
+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
+ * @mtd:	MTD device structure
+ * @command:	the command to be sent
+ * @column:	the column address for this command, -1 if none
+ * @page_addr:	the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This is the version for the new large page devices
+ * We dont have the seperate regions as we have in the small page devices.
+ * We must emulate NAND_CMD_READOOB to keep the code compatible.
+ *
+ */
+static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Emulate NAND_CMD_READOOB */
+	if (command == NAND_CMD_READOOB) {
+		column += mtd->oobblock;
+		command = NAND_CMD_READ0;
+	}
+	
+		
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/* Write out the command to the device. */
+	this->write_byte(mtd, command);
+	/* End command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (this->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			this->write_byte(mtd, column & 0xff);
+			this->write_byte(mtd, column >> 8);
+		}	
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for devices > 128MiB */
+			if (this->chipsize > (128 << 20))
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_CACHEDPROG:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		udelay(this->chip_delay);
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	case NAND_CMD_READ0:
+		/* Begin command latch cycle */
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		/* Write out the start read command */
+		this->write_byte(mtd, NAND_CMD_READSTART);
+		/* End command latch cycle */
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		/* Fall through into ready check */
+		
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+/**
+ * nand_get_device - [GENERIC] Get chip for selected access
+ * @this:	the nand chip descriptor
+ * @mtd:	MTD device structure
+ * @new_state:	the state which is requested 
+ *
+ * Get the device and lock it for exclusive access
+ */
+/* XXX U-BOOT XXX */
+#if 0
+static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+{
+	struct nand_chip *active = this;
+
+	DECLARE_WAITQUEUE (wait, current);
+
+	/* 
+	 * Grab the lock and see if the device is available 
+	*/
+retry:
+	/* Hardware controller shared among independend devices */
+	if (this->controller) {
+		spin_lock (&this->controller->lock);
+		if (this->controller->active)
+			active = this->controller->active;
+		else
+			this->controller->active = this;
+		spin_unlock (&this->controller->lock);
+	}
+	
+	if (active == this) {
+		spin_lock (&this->chip_lock);
+		if (this->state == FL_READY) {
+			this->state = new_state;
+			spin_unlock (&this->chip_lock);
+			return;
+		}
+	}	
+	set_current_state (TASK_UNINTERRUPTIBLE);
+	add_wait_queue (&active->wq, &wait);
+	spin_unlock (&active->chip_lock);
+	schedule ();
+	remove_wait_queue (&active->wq, &wait);
+	goto retry;
+}
+#else
+static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) {}
+#endif
+
+/**
+ * nand_wait - [DEFAULT]  wait until the command is done
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @state:	state to select the max. timeout value
+ *
+ * Wait for command done. This applies to erase and program only
+ * Erase can take up to 400ms and program up to 20ms according to 
+ * general NAND and SmartMedia specs
+ *
+*/
+/* XXX U-BOOT XXX */
+#if 0
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+	unsigned long	timeo = jiffies;
+	int	status;
+	
+	if (state == FL_ERASING)
+		 timeo += (HZ * 400) / 1000;
+	else
+		 timeo += (HZ * 20) / 1000;
+
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay (100);
+
+	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
+		this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+	else	
+		this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+
+	while (time_before(jiffies, timeo)) {		
+		/* Check, if we were interrupted */
+		if (this->state != state)
+			return 0;
+
+		if (this->dev_ready) {
+			if (this->dev_ready(mtd))
+				break;	
+		} else {
+			if (this->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		yield ();
+	}
+	status = (int) this->read_byte(mtd);
+	return status;
+
+	return 0;
+}
+#else
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+	/* TODO */
+	return 0;
+}
+#endif
+
+/**
+ * nand_write_page - [GENERIC] write one page
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @page: 	startpage inside the chip, must be called with (page & this->pagemask)
+ * @oob_buf:	out of band data buffer
+ * @oobsel:	out of band selecttion structre
+ * @cached:	1 = enable cached programming if supported by chip
+ *
+ * Nand_page_program function is used for write and writev !
+ * This function will always program a full page of data
+ * If you call it with a non page aligned buffer, you're lost :)
+ *
+ * Cached programming is not supported yet.
+ */
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, 
+	u_char *oob_buf,  struct nand_oobinfo *oobsel, int cached)
+{
+	int 	i, status;
+	u_char	ecc_code[32];
+	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
+	int  	*oob_config = oobsel->eccpos;
+	int	datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
+	int	eccbytes = 0;
+	
+	/* FIXME: Enable cached programming */
+	cached = 0;
+	
+	/* Send command to begin auto page programming */
+	this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
+
+	/* Write out complete page of data, take care of eccmode */
+	switch (eccmode) {
+	/* No ecc, write all */
+	case NAND_ECC_NONE:
+		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
+		this->write_buf(mtd, this->data_poi, mtd->oobblock);
+		break;
+		
+	/* Software ecc 3/256, write all */
+	case NAND_ECC_SOFT:
+		for (; eccsteps; eccsteps--) {
+			this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
+			for (i = 0; i < 3; i++, eccidx++)
+				oob_buf[oob_config[eccidx]] = ecc_code[i];
+			datidx += this->eccsize;
+		}
+		this->write_buf(mtd, this->data_poi, mtd->oobblock);
+		break;
+	default:
+		eccbytes = this->eccbytes;
+		for (; eccsteps; eccsteps--) {
+			/* enable hardware ecc logic for write */
+			this->enable_hwecc(mtd, NAND_ECC_WRITE);
+			this->write_buf(mtd, &this->data_poi[datidx], this->eccsize);
+			this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
+			for (i = 0; i < eccbytes; i++, eccidx++)
+				oob_buf[oob_config[eccidx]] = ecc_code[i];
+			/* If the hardware ecc provides syndromes then
+			 * the ecc code must be written immidiately after
+			 * the data bytes (words) */
+			if (this->options & NAND_HWECC_SYNDROME)
+				this->write_buf(mtd, ecc_code, eccbytes);
+			datidx += this->eccsize;
+		}
+		break;
+	}
+										
+	/* Write out OOB data */
+	if (this->options & NAND_HWECC_SYNDROME)
+		this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
+	else 
+		this->write_buf(mtd, oob_buf, mtd->oobsize);
+
+	/* Send command to actually program the data */
+	this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1);
+
+	if (!cached) {
+		/* call wait ready function */
+		status = this->waitfunc (mtd, this, FL_WRITING);
+		/* See if device thinks it succeeded */
+		if (status & 0x01) {
+			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
+			return -EIO;
+		}
+	} else {
+		/* FIXME: Implement cached programming ! */
+		/* wait until cache is ready*/
+		// status = this->waitfunc (mtd, this, FL_CACHEDRPG);
+	}
+	return 0;	
+}
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+/**
+ * nand_verify_pages - [GENERIC] verify the chip contents after a write
+ * @mtd:	MTD device structure
+ * @this:	NAND chip structure
+ * @page: 	startpage inside the chip, must be called with (page & this->pagemask)
+ * @numpages:	number of pages to verify
+ * @oob_buf:	out of band data buffer
+ * @oobsel:	out of band selecttion structre
+ * @chipnr:	number of the current chip
+ * @oobmode:	1 = full buffer verify, 0 = ecc only
+ *
+ * The NAND device assumes that it is always writing to a cleanly erased page.
+ * Hence, it performs its internal write verification only on bits that 
+ * transitioned from 1 to 0. The device does NOT verify the whole page on a
+ * byte by byte basis. It is possible that the page was not completely erased 
+ * or the page is becoming unusable due to wear. The read with ECC would catch 
+ * the error later when the ECC page check fails, but we would rather catch 
+ * it early in the page write stage. Better to write no data than invalid data.
+ */
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
+{
+	int 	i, j, datidx = 0, oobofs = 0, res = -EIO;
+	int	eccsteps = this->eccsteps;
+	int	hweccbytes; 
+	u_char 	oobdata[64];
+
+	hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
+
+	/* Send command to read back the first page */
+	this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
+
+	for(;;) {
+		for (j = 0; j < eccsteps; j++) {
+			/* Loop through and verify the data */
+			if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+			datidx += mtd->eccsize;
+			/* Have we a hw generator layout ? */
+			if (!hweccbytes)
+				continue;
+			if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+			oobofs += hweccbytes;
+		}
+
+		/* check, if we must compare all data or if we just have to
+		 * compare the ecc bytes
+		 */
+		if (oobmode) {
+			if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
+				DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
+				goto out;
+			}
+		} else {
+			/* Read always, else autoincrement fails */
+			this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps);
+
+			if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
+				int ecccnt = oobsel->eccbytes;
+		
+				for (i = 0; i < ecccnt; i++) {
+					int idx = oobsel->eccpos[i];
+					if (oobdata[idx] != oob_buf[oobofs + idx] ) {
+						DEBUG (MTD_DEBUG_LEVEL0,
+					       	"%s: Failed ECC write "
+						"verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
+						goto out;
+					}
+				}
+			}	
+		}
+		oobofs += mtd->oobsize - hweccbytes * eccsteps;
+		page++;
+		numpages--;
+
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		 * Do this also before returning, so the chip is
+		 * ready for the next command.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+
+		/* All done, return happy */
+		if (!numpages)
+			return 0;
+		
+			
+		/* Check, if the chip supports auto page increment */ 
+		if (!NAND_CANAUTOINCR(this))
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
+	}
+	/* 
+	 * Terminate the read command. We come here in case of an error
+	 * So we must issue a reset command.
+	 */
+out:	 
+	this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
+	return res;
+}
+#endif
+
+/**
+ * nand_read - [MTD Interface] MTD compability function for nand_read_ecc
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ *
+ * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL
+*/
+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+{
+	return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
+}			   
+
+
+/**
+ * nand_read_ecc - [MTD Interface] Read data with ECC
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ * @oob_buf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND read with ECC
+ */
+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
+			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
+{
+	int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
+	int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
+	struct nand_chip *this = mtd->priv;
+	u_char *data_poi, *oob_data = oob_buf;
+	u_char ecc_calc[32];
+	u_char ecc_code[32];
+        int eccmode, eccsteps;
+	int	*oob_config, datidx;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+	int	eccbytes;
+	int	compareecc = 1;
+	int	oobreadlen;
+
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
+		*retlen = 0;
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd ,FL_READING);
+
+	/* use userspace supplied oobinfo, if zero */
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+	
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
+		oobsel = this->autooob;
+		
+	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
+	oob_config = oobsel->eccpos;
+
+	/* Select the NAND device */
+	chipnr = (int)(from >> this->chip_shift);
+	this->select_chip(mtd, chipnr);
+
+	/* First we calculate the starting page */
+	realpage = (int) (from >> this->page_shift);
+	page = realpage & this->pagemask;
+
+	/* Get raw starting column */
+	col = from & (mtd->oobblock - 1);
+
+	end = mtd->oobblock;
+	ecc = this->eccsize;
+	eccbytes = this->eccbytes;
+	
+	if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
+		compareecc = 0;
+
+	oobreadlen = mtd->oobsize;
+	if (this->options & NAND_HWECC_SYNDROME) 
+		oobreadlen -= oobsel->eccbytes;
+
+	/* Loop until all data read */
+	while (read < len) {
+		
+		int aligned = (!col && (len - read) >= end);
+		/* 
+		 * If the read is not page aligned, we have to read into data buffer
+		 * due to ecc, else we read into return buffer direct
+		 */
+		if (aligned)
+			data_poi = &buf[read];
+		else 
+			data_poi = this->data_buf;
+		
+		/* Check, if we have this page in the buffer 
+		 *
+		 * FIXME: Make it work when we must provide oob data too,
+		 * check the usage of data_buf oob field
+		 */
+		if (realpage == this->pagebuf && !oob_buf) {
+			/* aligned read ? */
+			if (aligned)
+				memcpy (data_poi, this->data_buf, end);
+			goto readdata;
+		}
+
+		/* Check, if we must send the read command */
+		if (sndcmd) {
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
+			sndcmd = 0;
+		}	
+
+		/* get oob area, if we have no oob buffer from fs-driver */
+		if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
+			oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
+			oob_data = &this->data_buf[end];
+
+		eccsteps = this->eccsteps;
+		
+		switch (eccmode) {
+		case NAND_ECC_NONE: {	/* No ECC, Read in a page */
+/* XXX U-BOOT XXX */
+#if 0
+			static unsigned long lastwhinge = 0;
+			if ((lastwhinge / HZ) != (jiffies / HZ)) {
+				printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n");
+				lastwhinge = jiffies;
+			}
+#else
+			puts("Reading data from NAND FLASH without ECC is not recommended\n");
+#endif
+			this->read_buf(mtd, data_poi, end);
+			break;
+		}
+			
+		case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
+			this->read_buf(mtd, data_poi, end);
+			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) 
+				this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
+			break;	
+
+		default:
+			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
+				this->enable_hwecc(mtd, NAND_ECC_READ);
+				this->read_buf(mtd, &data_poi[datidx], ecc);
+
+				/* HW ecc with syndrome calculation must read the
+				 * syndrome from flash immidiately after the data */
+				if (!compareecc) {
+					/* Some hw ecc generators need to know when the
+					 * syndrome is read from flash */
+					this->enable_hwecc(mtd, NAND_ECC_READSYN);
+					this->read_buf(mtd, &oob_data[i], eccbytes);
+					/* We calc error correction directly, it checks the hw
+					 * generator for an error, reads back the syndrome and
+					 * does the error correction on the fly */
+					if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
+						DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " 
+							"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
+						ecc_failed++;
+					}
+				} else {
+					this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
+				}	
+			}
+			break;						
+		}
+
+		/* read oobdata */
+		this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
+
+		/* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
+		if (!compareecc)
+			goto readoob;	
+		
+		/* Pick the ECC bytes out of the oob data */
+		for (j = 0; j < oobsel->eccbytes; j++)
+			ecc_code[j] = oob_data[oob_config[j]];
+
+		/* correct data, if neccecary */
+		for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
+			ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
+			
+			/* Get next chunk of ecc bytes */
+			j += eccbytes;
+			
+			/* Check, if we have a fs supplied oob-buffer, 
+			 * This is the legacy mode. Used by YAFFS1
+			 * Should go away some day
+			 */
+			if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { 
+				int *p = (int *)(&oob_data[mtd->oobsize]);
+				p[i] = ecc_status;
+			}
+			
+			if (ecc_status == -1) {	
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
+				ecc_failed++;
+			}
+		}		
+
+	readoob:
+		/* check, if we have a fs supplied oob-buffer */
+		if (oob_buf) {
+			/* without autoplace. Legacy mode used by YAFFS1 */
+			switch(oobsel->useecc) {
+			case MTD_NANDECC_AUTOPLACE:
+			case MTD_NANDECC_AUTOPL_USR:
+				/* Walk through the autoplace chunks */
+				for (i = 0, j = 0; j < mtd->oobavail; i++) {
+					int from = oobsel->oobfree[i][0];
+					int num = oobsel->oobfree[i][1];
+					memcpy(&oob_buf[oob], &oob_data[from], num);
+					j+= num;
+				}
+				oob += mtd->oobavail;
+				break;
+			case MTD_NANDECC_PLACE:
+				/* YAFFS1 legacy mode */
+				oob_data += this->eccsteps * sizeof (int);
+			default:
+				oob_data += mtd->oobsize;
+			}
+		}
+	readdata:
+		/* Partial page read, transfer data into fs buffer */
+		if (!aligned) { 
+			for (j = col; j < end && read < len; j++)
+				buf[read++] = data_poi[j];
+			this->pagebuf = realpage;	
+		} else		
+			read += mtd->oobblock;
+
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+			
+		if (read == len)
+			break;	
+
+		/* For subsequent reads align to page boundary. */
+		col = 0;
+		/* Increment page address */
+		realpage++;
+
+		page = realpage & this->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+		/* Check, if the chip supports auto page increment 
+		 * or if we have hit a block boundary. 
+		*/ 
+		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+			sndcmd = 1;				
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/*
+	 * Return success, if no ECC failures, else -EBADMSG
+	 * fs driver will take care of that, because
+	 * retlen == desired len and result == -EBADMSG
+	 */
+	*retlen = read;
+	return ecc_failed ? -EBADMSG : 0;
+}
+
+/**
+ * nand_read_oob - [MTD Interface] NAND read out-of-band
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @retlen:	pointer to variable to store the number of read bytes
+ * @buf:	the databuffer to put data
+ *
+ * NAND read out-of-band data from the spare area
+ */
+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+{
+	int i, col, page, chipnr;
+	struct nand_chip *this = mtd->priv;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+	/* Shift to get page */
+	page = (int)(from >> this->page_shift);
+	chipnr = (int)(from >> this->chip_shift);
+	
+	/* Mask to get column */
+	col = from & (mtd->oobsize - 1);
+
+	/* Initialize return length value */
+	*retlen = 0;
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
+		*retlen = 0;
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd , FL_READING);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Send the read command */
+	this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
+	/* 
+	 * Read the data, if we read more than one page
+	 * oob data, let the device transfer the data !
+	 */
+	i = 0;
+	while (i < len) {
+		int thislen = mtd->oobsize - col;
+		thislen = min_t(int, thislen, len);
+		this->read_buf(mtd, &buf[i], thislen);
+		i += thislen;
+		
+		/* Apply delay or wait for ready/busy pin 
+		 * Do this before the AUTOINCR check, so no problems
+		 * arise if a chip which does auto increment
+		 * is marked as NOAUTOINCR by the board driver.
+		*/
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+
+		/* Read more ? */
+		if (i < len) {
+			page++;
+			col = 0;
+
+			/* Check, if we cross a chip boundary */
+			if (!(page & this->pagemask)) {
+				chipnr++;
+				this->select_chip(mtd, -1);
+				this->select_chip(mtd, chipnr);
+			}
+				
+			/* Check, if the chip supports auto page increment 
+			 * or if we have hit a block boundary. 
+			*/ 
+			if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
+				/* For subsequent page reads set offset to 0 */
+			        this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
+			}
+		}
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/* Return happy */
+	*retlen = len;
+	return 0;
+}
+
+/**
+ * nand_read_raw - [GENERIC] Read raw data including oob into buffer
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @from:	offset to read from
+ * @len:	number of bytes to read
+ * @ooblen:	number of oob data bytes to read
+ *
+ * Read raw data including oob into buffer
+ */
+int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen)
+{
+	struct nand_chip *this = mtd->priv;
+	int page = (int) (from >> this->page_shift);
+	int chip = (int) (from >> this->chip_shift);
+	int sndcmd = 1;
+	int cnt = 0;
+	int pagesize = mtd->oobblock + mtd->oobsize;
+	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd , FL_READING);
+
+	this->select_chip (mtd, chip);
+	
+	/* Add requested oob length */
+	len += ooblen;
+	
+	while (len) {
+		if (sndcmd)
+			this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
+		sndcmd = 0;	
+
+		this->read_buf (mtd, &buf[cnt], pagesize);
+
+		len -= pagesize;
+		cnt += pagesize;
+		page++;
+		
+		if (!this->dev_ready) 
+			udelay (this->chip_delay);
+		else
+			while (!this->dev_ready(mtd));	
+			
+		/* Check, if the chip supports auto page increment */ 
+		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+			sndcmd = 1;
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+	return 0;
+}
+
+
+/** 
+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer 
+ * @mtd:	MTD device structure
+ * @fsbuf:	buffer given by fs driver
+ * @oobsel:	out of band selection structre
+ * @autoplace:	1 = place given buffer into the oob bytes
+ * @numpages:	number of pages to prepare
+ *
+ * Return:
+ * 1. Filesystem buffer available and autoplacement is off,
+ *    return filesystem buffer
+ * 2. No filesystem buffer or autoplace is off, return internal
+ *    buffer
+ * 3. Filesystem buffer is given and autoplace selected
+ *    put data from fs buffer into internal buffer and
+ *    retrun internal buffer
+ *
+ * Note: The internal buffer is filled with 0xff. This must
+ * be done only once, when no autoplacement happens
+ * Autoplacement sets the buffer dirty flag, which
+ * forces the 0xff fill before using the buffer again.
+ *
+*/
+static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,
+		int autoplace, int numpages)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, len, ofs;
+
+	/* Zero copy fs supplied buffer */
+	if (fsbuf && !autoplace) 
+		return fsbuf;
+
+	/* Check, if the buffer must be filled with ff again */
+	if (this->oobdirty) {	
+		memset (this->oob_buf, 0xff, 
+			mtd->oobsize << (this->phys_erase_shift - this->page_shift));
+		this->oobdirty = 0;
+	}	
+	
+	/* If we have no autoplacement or no fs buffer use the internal one */
+	if (!autoplace || !fsbuf)
+		return this->oob_buf;
+	
+	/* Walk through the pages and place the data */
+	this->oobdirty = 1;
+	ofs = 0;
+	while (numpages--) {
+		for (i = 0, len = 0; len < mtd->oobavail; i++) {
+			int to = ofs + oobsel->oobfree[i][0];
+			int num = oobsel->oobfree[i][1];
+			memcpy (&this->oob_buf[to], fsbuf, num);
+			len += num;
+			fsbuf += num;
+		}
+		ofs += mtd->oobavail;
+	}
+	return this->oob_buf;
+}
+
+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
+
+/**
+ * nand_write - [MTD Interface] compability function for nand_write_ecc
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL
+ *
+*/
+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+{
+	return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
+}
+			   
+/**
+ * nand_write_ecc - [MTD Interface] NAND write with ECC
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ * @eccbuf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND write with ECC
+ */
+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
+{
+	int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;
+	int autoplace = 0, numpages, totalpages;
+	struct nand_chip *this = mtd->priv;
+	u_char *oobbuf, *bufstart;
+	int	ppblock = (1 << (this->phys_erase_shift - this->page_shift));
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+
+	/* Initialize retlen, in case of early exit */
+	*retlen = 0;
+
+	/* Do not allow write past end of device */
+	if ((to + len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* reject writes, which are not page aligned */	
+	if (NOTALIGNED (to) || NOTALIGNED(len)) {
+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Calculate chipnr */
+	chipnr = (int)(to >> this->chip_shift);
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+
+	/* if oobsel is NULL, use chip defaults */
+	if (oobsel == NULL) 
+		oobsel = &mtd->oobinfo;		
+		
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
+		oobsel = this->autooob;
+		autoplace = 1;
+	}	
+	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
+		autoplace = 1;
+
+	/* Setup variables and oob buffer */
+	totalpages = len >> this->page_shift;
+	page = (int) (to >> this->page_shift);
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page <= this->pagebuf && this->pagebuf < (page + totalpages))  
+		this->pagebuf = -1;
+	
+	/* Set it relative to chip */
+	page &= this->pagemask;
+	startpage = page;
+	/* Calc number of pages we can write in one go */
+	numpages = min (ppblock - (startpage  & (ppblock - 1)), totalpages);
+	oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);
+	bufstart = (u_char *)buf;
+
+	/* Loop until all data is written */
+	while (written < len) {
+
+		this->data_poi = (u_char*) &buf[written];
+		/* Write one page. If this is the last page to write
+		 * or the last page in this block, then use the
+		 * real pageprogram command, else select cached programming
+		 * if supported by the chip.
+		 */
+		ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
+		if (ret) {
+			DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
+			goto out;
+		}	
+		/* Next oob page */
+		oob += mtd->oobsize;
+		/* Update written bytes count */
+		written += mtd->oobblock;
+		if (written == len) 
+			goto cmp;
+		
+		/* Increment page address */
+		page++;
+
+		/* Have we hit a block boundary ? Then we have to verify and
+		 * if verify is ok, we have to setup the oob buffer for
+		 * the next pages.
+		*/
+		if (!(page & (ppblock - 1))){
+			int ofs;
+			this->data_poi = bufstart;
+			ret = nand_verify_pages (mtd, this, startpage, 
+				page - startpage,
+				oobbuf, oobsel, chipnr, (eccbuf != NULL));
+			if (ret) {
+				DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+				goto out;
+			}	
+			*retlen = written;
+
+			ofs = autoplace ? mtd->oobavail : mtd->oobsize;
+			if (eccbuf)
+				eccbuf += (page - startpage) * ofs;
+			totalpages -= page - startpage;
+			numpages = min (totalpages, ppblock);
+			page &= this->pagemask;
+			startpage = page;
+			oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, 
+					autoplace, numpages);
+			/* Check, if we cross a chip boundary */
+			if (!page) {
+				chipnr++;
+				this->select_chip(mtd, -1);
+				this->select_chip(mtd, chipnr);
+			}
+		}
+	}
+	/* Verify the remaining pages */
+cmp:
+	this->data_poi = bufstart;
+ 	ret = nand_verify_pages (mtd, this, startpage, totalpages,
+		oobbuf, oobsel, chipnr, (eccbuf != NULL));
+	if (!ret)
+		*retlen = written;
+	else	
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
+
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	return ret;
+}
+
+
+/**
+ * nand_write_oob - [MTD Interface] NAND write out-of-band
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * NAND write out-of-band
+ */
+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+{
+	int column, page, status, ret = -EIO, chipnr;
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+
+	/* Shift to get page */
+	page = (int) (to >> this->page_shift);
+	chipnr = (int) (to >> this->chip_shift);
+
+	/* Mask to get column */
+	column = to & (mtd->oobsize - 1);
+
+	/* Initialize return length value */
+	*retlen = 0;
+
+	/* Do not allow write past end of page */
+	if ((column + len) > mtd->oobsize) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Reset the chip. Some chips (like the Toshiba TC5832DC found
+	   in one of my DiskOnChip 2000 test units) will clear the whole
+	   data page too if we don't do this. I have no clue why, but
+	   I seem to have 'fixed' it in the doc2000 driver in
+	   August 1999.  dwmw2. */
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+	
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page == this->pagebuf)
+		this->pagebuf = -1;
+
+	if (NAND_MUST_PAD(this)) {
+		/* Write out desired data */
+		this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+		/* prepad 0xff for partial programming */
+		this->write_buf(mtd, ffchars, column);
+		/* write data */
+		this->write_buf(mtd, buf, len);
+		/* postpad 0xff for partial programming */
+		this->write_buf(mtd, ffchars, mtd->oobsize - (len+column));
+	} else {
+		/* Write out desired data */
+		this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask);
+		/* write data */
+		this->write_buf(mtd, buf, len);
+	}
+	/* Send command to program the OOB data */
+	this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = this->waitfunc (mtd, this, FL_WRITING);
+
+	/* See if device thinks it succeeded */
+	if (status & 0x01) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
+		ret = -EIO;
+		goto out;
+	}
+	/* Return happy */
+	*retlen = len;
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+	/* Send command to read back the data */
+	this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
+
+	if (this->verify_buf(mtd, buf, len)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
+		ret = -EIO;
+		goto out;
+	}
+#endif
+	ret = 0;
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	return ret;
+}
+
+/* XXX U-BOOT XXX */
+#if 0
+/**
+ * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc
+ * @mtd:	MTD device structure
+ * @vecs:	the iovectors to write
+ * @count:	number of vectors
+ * @to:		offset to write to
+ * @retlen:	pointer to variable to store the number of written bytes
+ *
+ * NAND write with kvec. This just calls the ecc function
+ */
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+		loff_t to, size_t * retlen)
+{
+	return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));	
+}
+
+/**
+ * nand_writev_ecc - [MTD Interface] write with iovec with ecc
+ * @mtd:	MTD device structure
+ * @vecs:	the iovectors to write
+ * @count:	number of vectors
+ * @to:		offset to write to
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @eccbuf:	filesystem supplied oob data buffer
+ * @oobsel:	oob selection structure
+ *
+ * NAND write with iovec with ecc
+ */
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
+{
+	int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
+	int oob, numpages, autoplace = 0, startpage;
+	struct nand_chip *this = mtd->priv;
+	int	ppblock = (1 << (this->phys_erase_shift - this->page_shift));
+	u_char *oobbuf, *bufstart;
+
+	/* Preset written len for early exit */
+	*retlen = 0;
+
+	/* Calculate total length of data */
+	total_len = 0;
+	for (i = 0; i < count; i++)
+		total_len += (int) vecs[i].iov_len;
+
+	DEBUG (MTD_DEBUG_LEVEL3,
+	       "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
+
+	/* Do not allow write past end of page */
+	if ((to + total_len) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
+		return -EINVAL;
+	}
+
+	/* reject writes, which are not page aligned */	
+	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_WRITING);
+
+	/* Get the current chip-nr */
+	chipnr = (int) (to >> this->chip_shift);
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		goto out;
+
+	/* if oobsel is NULL, use chip defaults */
+	if (oobsel == NULL) 
+		oobsel = &mtd->oobinfo;		
+
+	/* Autoplace of oob data ? Use the default placement scheme */
+	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
+		oobsel = this->autooob;
+		autoplace = 1;
+	}	
+	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
+		autoplace = 1;
+
+	/* Setup start page */
+	page = (int) (to >> this->page_shift);
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))  
+		this->pagebuf = -1;
+
+	startpage = page & this->pagemask;
+
+	/* Loop until all kvec' data has been written */
+	len = 0;
+	while (count) {
+		/* If the given tuple is >= pagesize then
+		 * write it out from the iov
+		 */
+		if ((vecs->iov_len - len) >= mtd->oobblock) {
+			/* Calc number of pages we can write
+			 * out of this iov in one go */
+			numpages = (vecs->iov_len - len) >> this->page_shift;
+			/* Do not cross block boundaries */
+			numpages = min (ppblock - (startpage & (ppblock - 1)), numpages);
+			oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
+			bufstart = (u_char *)vecs->iov_base;
+			bufstart += len;
+			this->data_poi = bufstart;
+			oob = 0;
+			for (i = 1; i <= numpages; i++) {
+				/* Write one page. If this is the last page to write
+				 * then use the real pageprogram command, else select 
+				 * cached programming if supported by the chip.
+				 */
+				ret = nand_write_page (mtd, this, page & this->pagemask, 
+					&oobbuf[oob], oobsel, i != numpages);
+				if (ret)
+					goto out;
+				this->data_poi += mtd->oobblock;
+				len += mtd->oobblock;
+				oob += mtd->oobsize;
+				page++;
+			}
+			/* Check, if we have to switch to the next tuple */
+			if (len >= (int) vecs->iov_len) {
+				vecs++;
+				len = 0;
+				count--;
+			}
+		} else {
+			/* We must use the internal buffer, read data out of each 
+			 * tuple until we have a full page to write
+			 */
+			int cnt = 0;
+			while (cnt < mtd->oobblock) {
+				if (vecs->iov_base != NULL && vecs->iov_len) 
+					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
+				/* Check, if we have to switch to the next tuple */
+				if (len >= (int) vecs->iov_len) {
+					vecs++;
+					len = 0;
+					count--;
+				}
+			}
+			this->pagebuf = page;	
+			this->data_poi = this->data_buf;	
+			bufstart = this->data_poi;
+			numpages = 1;		
+			oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
+			ret = nand_write_page (mtd, this, page & this->pagemask,
+				oobbuf, oobsel, 0);
+			if (ret)
+				goto out;
+			page++;
+		}
+
+		this->data_poi = bufstart;
+		ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
+		if (ret)
+			goto out;
+			
+		written += mtd->oobblock * numpages;
+		/* All done ? */
+		if (!count)
+			break;
+
+		startpage = page & this->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!startpage) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+	}
+	ret = 0;
+out:
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	*retlen = written;
+	return ret;
+}
+#endif
+
+/**
+ * single_erease_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd:	MTD device structure
+ * @page:	the page address of the block which will be erased
+ *
+ * Standard erase command for NAND chips
+ */
+static void single_erase_cmd (struct mtd_info *mtd, int page)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Send commands to erase a block */
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
+	this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * multi_erease_cmd - [GENERIC] AND specific block erase command function
+ * @mtd:	MTD device structure
+ * @page:	the page address of the block which will be erased
+ *
+ * AND multi block erase command function
+ * Erase 4 consecutive blocks
+ */
+static void multi_erase_cmd (struct mtd_info *mtd, int page)
+{
+	struct nand_chip *this = mtd->priv;
+	/* Send commands to erase a block */
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
+	this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
+	this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * nand_erase - [MTD Interface] erase block(s)
+ * @mtd:	MTD device structure
+ * @instr:	erase instruction
+ *
+ * Erase one ore more blocks
+ */
+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	return nand_erase_nand (mtd, instr, 0);
+}
+ 
+/**
+ * nand_erase_intern - [NAND Interface] erase block(s)
+ * @mtd:	MTD device structure
+ * @instr:	erase instruction
+ * @allowbbt:	allow erasing the bbt area
+ *
+ * Erase one ore more blocks
+ */
+int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
+{
+	int page, len, status, pages_per_block, ret, chipnr;
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3,
+	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
+
+	/* Start address must align on block boundary */
+	if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+		return -EINVAL;
+	}
+
+	/* Length must align on block boundary */
+	if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow erase past end of device */
+	if ((instr->len + instr->addr) > mtd->size) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
+		return -EINVAL;
+	}
+
+	instr->fail_addr = 0xffffffff;
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_ERASING);
+
+	/* Shift to get first page */
+	page = (int) (instr->addr >> this->page_shift);
+	chipnr = (int) (instr->addr >> this->chip_shift);
+
+	/* Calculate pages in each block */
+	pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
+
+	/* Select the NAND device */
+	this->select_chip(mtd, chipnr);
+
+	/* Check the WP bit */
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
+		instr->state = MTD_ERASE_FAILED;
+		goto erase_exit;
+	}
+
+	/* Loop through the pages */
+	len = instr->len;
+
+	instr->state = MTD_ERASING;
+
+	while (len) {
+		/* Check if we have a bad block, we do not erase bad blocks ! */
+		if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) {
+			printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
+			instr->state = MTD_ERASE_FAILED;
+			goto erase_exit;
+		}
+		
+		/* Invalidate the page cache, if we erase the block which contains 
+		   the current cached page */
+		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
+			this->pagebuf = -1;
+
+		this->erase_cmd (mtd, page & this->pagemask);
+		
+		status = this->waitfunc (mtd, this, FL_ERASING);
+
+		/* See if block erase succeeded */
+		if (status & 0x01) {
+			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr = (page << this->page_shift);
+			goto erase_exit;
+		}
+		
+		/* Increment page address and decrement length */
+		len -= (1 << this->phys_erase_shift);
+		page += pages_per_block;
+
+		/* Check, if we cross a chip boundary */
+		if (len && !(page & this->pagemask)) {
+			chipnr++;
+			this->select_chip(mtd, -1);
+			this->select_chip(mtd, chipnr);
+		}
+	}
+	instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+	/* Do call back function */
+	if (!ret)
+		mtd_erase_callback(instr);
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/* Return more or less happy */
+	return ret;
+}
+
+/**
+ * nand_sync - [MTD Interface] sync
+ * @mtd:	MTD device structure
+ *
+ * Sync is actually a wait for chip ready function
+ */
+static void nand_sync (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device (this, mtd, FL_SYNCING);
+	/* Release it and go back */
+	nand_release_device (mtd);
+}
+
+
+/**
+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset relative to mtd start
+ */
+static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
+{
+	/* Check for invalid offset */
+	if (ofs > mtd->size) 
+		return -EINVAL;
+	
+	return nand_block_checkbad (mtd, ofs, 1, 0);
+}
+
+/**
+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * @mtd:	MTD device structure
+ * @ofs:	offset relative to mtd start
+ */
+static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *this = mtd->priv;
+	int ret;
+
+        if ((ret = nand_block_isbad(mtd, ofs))) {
+        	/* If it was bad already, return success and do nothing. */
+		if (ret > 0)
+			return 0;
+        	return ret;
+        }
+
+	return this->block_markbad(mtd, ofs);
+}
+
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd:	MTD device structure
+ * @maxchips:	Number of chips to scan for
+ *
+ * This fills out all the not initialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values. Buffers are allocated if
+ * they are not provided by the board driver
+ *
+ */
+int nand_scan (struct mtd_info *mtd, int maxchips)
+{
+	int i, j, nand_maf_id, nand_dev_id, busw;
+	struct nand_chip *this = mtd->priv;
+
+	/* Get buswidth to select the correct functions*/
+	busw = this->options & NAND_BUSWIDTH_16;
+
+	/* check for proper chip_delay setup, set 20us if not */
+	if (!this->chip_delay)
+		this->chip_delay = 20;
+
+	/* check, if a user supplied command function given */
+	if (this->cmdfunc == NULL)
+		this->cmdfunc = nand_command;
+
+	/* check, if a user supplied wait function given */
+	if (this->waitfunc == NULL)
+		this->waitfunc = nand_wait;
+
+	if (!this->select_chip)
+		this->select_chip = nand_select_chip;
+	if (!this->write_byte)
+		this->write_byte = busw ? nand_write_byte16 : nand_write_byte;
+	if (!this->read_byte)
+		this->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+	if (!this->write_word)
+		this->write_word = nand_write_word;
+	if (!this->read_word)
+		this->read_word = nand_read_word;
+	if (!this->block_bad)
+		this->block_bad = nand_block_bad;
+	if (!this->block_markbad)
+		this->block_markbad = nand_default_block_markbad;
+	if (!this->write_buf)
+		this->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+	if (!this->read_buf)
+		this->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+	if (!this->verify_buf)
+		this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+	if (!this->scan_bbt)
+		this->scan_bbt = nand_default_bbt;
+
+	/* Select the device */
+	this->select_chip(mtd, 0);
+
+	/* Send the command for reading device ID */
+	this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	nand_maf_id = this->read_byte(mtd);
+	nand_dev_id = this->read_byte(mtd);
+
+	/* Print and store flash device information */
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+				
+		if (nand_dev_id != nand_flash_ids[i].id) 
+			continue;
+
+		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
+		this->chipsize = nand_flash_ids[i].chipsize << 20;
+		
+		/* New devices have all the information in additional id bytes */
+		if (!nand_flash_ids[i].pagesize) {
+			int extid;
+			/* The 3rd id byte contains non relevant data ATM */
+			extid = this->read_byte(mtd);
+			/* The 4th id byte is the important one */
+			extid = this->read_byte(mtd);
+			/* Calc pagesize */
+			mtd->oobblock = 1024 << (extid & 0x3);
+			extid >>= 2;
+			/* Calc oobsize */
+			mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
+			extid >>= 2;
+			/* Calc blocksize. Blocksize is multiples of 64KiB */
+			mtd->erasesize = (64 * 1024)  << (extid & 0x03);
+			extid >>= 2;
+			/* Get buswidth information */
+			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+		
+		} else {
+			/* Old devices have this data hardcoded in the
+			 * device id table */
+			mtd->erasesize = nand_flash_ids[i].erasesize;
+			mtd->oobblock = nand_flash_ids[i].pagesize;
+			mtd->oobsize = mtd->oobblock / 32;
+			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
+		}
+
+		/* Check, if buswidth is correct. Hardware drivers should set
+		 * this correct ! */
+		if (busw != (this->options & NAND_BUSWIDTH_16)) {
+			printk (KERN_INFO "NAND device: Manufacturer ID:"
+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+				nand_manuf_ids[i].name , mtd->name);
+			printk (KERN_WARNING 
+				"NAND bus width %d instead %d bit\n", 
+					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
+					busw ? 16 : 8);
+			this->select_chip(mtd, -1);
+			return 1;	
+		}
+		
+		/* Calculate the address shift from the page size */	
+		this->page_shift = ffs(mtd->oobblock) - 1;
+		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
+		this->chip_shift = ffs(this->chipsize) - 1;
+
+		/* Set the bad block position */
+		this->badblockpos = mtd->oobblock > 512 ? 
+			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+
+		/* Get chip options, preserve non chip based options */
+		this->options &= ~NAND_CHIPOPTIONS_MSK;
+		this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
+		/* Set this as a default. Board drivers can override it, if neccecary */
+		this->options |= NAND_NO_AUTOINCR;
+		/* Check if this is a not a samsung device. Do not clear the options
+		 * for chips which are not having an extended id.
+		 */	
+		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
+			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+		
+		/* Check for AND chips with 4 page planes */
+		if (this->options & NAND_4PAGE_ARRAY)
+			this->erase_cmd = multi_erase_cmd;
+		else
+			this->erase_cmd = single_erase_cmd;
+
+		/* Do not replace user supplied command function ! */
+		if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
+			this->cmdfunc = nand_command_lp;
+				
+		/* Try to identify manufacturer */
+		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
+			if (nand_manuf_ids[j].id == nand_maf_id)
+				break;
+		}
+		printk (KERN_INFO "NAND device: Manufacturer ID:"
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+			nand_manuf_ids[j].name , nand_flash_ids[i].name);
+		break;
+	}
+
+	if (!nand_flash_ids[i].name) {
+		printk (KERN_WARNING "No NAND device found!!!\n");
+		this->select_chip(mtd, -1);
+		return 1;
+	}
+
+	for (i=1; i < maxchips; i++) {
+		this->select_chip(mtd, i);
+
+		/* Send the command for reading device ID */
+		this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+
+		/* Read manufacturer and device IDs */
+		if (nand_maf_id != this->read_byte(mtd) ||
+		    nand_dev_id != this->read_byte(mtd))
+			break;
+	}
+	if (i > 1)
+		printk(KERN_INFO "%d NAND chips detected\n", i);
+	
+	/* Allocate buffers, if neccecary */
+	if (!this->oob_buf) {
+		size_t len;
+		len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
+		this->oob_buf = kmalloc (len, GFP_KERNEL);
+		if (!this->oob_buf) {
+			printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
+			return -ENOMEM;
+		}
+		this->options |= NAND_OOBBUF_ALLOC;
+	}
+	
+	if (!this->data_buf) {
+		size_t len;
+		len = mtd->oobblock + mtd->oobsize;
+		this->data_buf = kmalloc (len, GFP_KERNEL);
+		if (!this->data_buf) {
+			if (this->options & NAND_OOBBUF_ALLOC)
+				kfree (this->oob_buf);
+			printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
+			return -ENOMEM;
+		}
+		this->options |= NAND_DATABUF_ALLOC;
+	}
+
+	/* Store the number of chips and calc total size for mtd */
+	this->numchips = i;
+	mtd->size = i * this->chipsize;
+	/* Convert chipsize to number of pages per chip -1. */
+	this->pagemask = (this->chipsize >> this->page_shift) - 1;
+	/* Preset the internal oob buffer */
+	memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
+
+	/* If no default placement scheme is given, select an
+	 * appropriate one */
+	if (!this->autooob) {
+		/* Select the appropriate default oob placement scheme for
+		 * placement agnostic filesystems */
+		switch (mtd->oobsize) { 
+		case 8:
+			this->autooob = &nand_oob_8;
+			break;
+		case 16:
+			this->autooob = &nand_oob_16;
+			break;
+		case 64:
+			this->autooob = &nand_oob_64;
+			break;
+		default:
+			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
+				mtd->oobsize);
+/*			BUG(); */
+		}
+	}
+	
+	/* The number of bytes available for the filesystem to place fs dependend
+	 * oob data */
+	if (this->options & NAND_BUSWIDTH_16) {
+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
+		if (this->autooob->eccbytes & 0x01)
+			mtd->oobavail--;
+	} else
+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
+
+	/* 
+	 * check ECC mode, default to software
+	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
+	 * fallback to software ECC 
+	*/
+	this->eccsize = 256;	/* set default eccsize */	
+	this->eccbytes = 3;
+
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		if (mtd->oobblock < 2048) {
+			printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+			       mtd->oobblock);
+			this->eccmode = NAND_ECC_SOFT;
+			this->calculate_ecc = nand_calculate_ecc;
+			this->correct_data = nand_correct_data;
+		} else
+			this->eccsize = 2048;
+		break;
+
+	case NAND_ECC_HW3_512: 
+	case NAND_ECC_HW6_512: 
+	case NAND_ECC_HW8_512: 
+		if (mtd->oobblock == 256) {
+			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
+			this->eccmode = NAND_ECC_SOFT;
+			this->calculate_ecc = nand_calculate_ecc;
+			this->correct_data = nand_correct_data;
+		} else 
+			this->eccsize = 512; /* set eccsize to 512 */
+		break;
+			
+	case NAND_ECC_HW3_256:
+		break;
+		
+	case NAND_ECC_NONE: 
+		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
+		this->eccmode = NAND_ECC_NONE;
+		break;
+
+	case NAND_ECC_SOFT:	
+		this->calculate_ecc = nand_calculate_ecc;
+		this->correct_data = nand_correct_data;
+		break;
+
+	default:
+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
+/*		BUG(); */
+	}	
+
+	/* Check hardware ecc function availability and adjust number of ecc bytes per 
+	 * calculation step
+	*/
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		this->eccbytes += 4;
+	case NAND_ECC_HW8_512: 
+		this->eccbytes += 2;
+	case NAND_ECC_HW6_512: 
+		this->eccbytes += 3;
+	case NAND_ECC_HW3_512: 
+	case NAND_ECC_HW3_256:
+		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
+			break;
+		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
+/*		BUG();	*/
+	}
+		
+	mtd->eccsize = this->eccsize;
+	
+	/* Set the number of read / write steps for one page to ensure ECC generation */
+	switch (this->eccmode) {
+	case NAND_ECC_HW12_2048:
+		this->eccsteps = mtd->oobblock / 2048;
+		break;
+	case NAND_ECC_HW3_512:
+	case NAND_ECC_HW6_512:
+	case NAND_ECC_HW8_512:
+		this->eccsteps = mtd->oobblock / 512;
+		break;
+	case NAND_ECC_HW3_256:
+	case NAND_ECC_SOFT:	
+		this->eccsteps = mtd->oobblock / 256;
+		break;
+		
+	case NAND_ECC_NONE: 
+		this->eccsteps = 1;
+		break;
+	}
+
+/* XXX U-BOOT XXX */
+#if 0	
+	/* Initialize state, waitqueue and spinlock */
+	this->state = FL_READY;
+	init_waitqueue_head (&this->wq);
+	spin_lock_init (&this->chip_lock);
+#endif
+
+	/* De-select the device */
+	this->select_chip(mtd, -1);
+
+	/* Invalidate the pagebuffer reference */
+	this->pagebuf = -1;
+
+	/* Fill in remaining MTD driver data */
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
+	mtd->ecctype = MTD_ECC_SW;
+	mtd->erase = nand_erase;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = nand_read;
+	mtd->write = nand_write;
+	mtd->read_ecc = nand_read_ecc;
+	mtd->write_ecc = nand_write_ecc;
+	mtd->read_oob = nand_read_oob;
+	mtd->write_oob = nand_write_oob;
+/* XXX U-BOOT XXX */
+#if 0
+	mtd->readv = NULL;
+	mtd->writev = nand_writev;
+	mtd->writev_ecc = nand_writev_ecc;
+#endif
+	mtd->sync = nand_sync;
+/* XXX U-BOOT XXX */
+#if 0
+	mtd->lock = NULL;
+	mtd->unlock = NULL;
+	mtd->suspend = NULL;
+	mtd->resume = NULL;
+#endif
+	mtd->block_isbad = nand_block_isbad;
+	mtd->block_markbad = nand_block_markbad;
+
+	/* and make the autooob the default one */
+	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
+/* XXX U-BOOT XXX */
+#if 0
+	mtd->owner = THIS_MODULE;
+#endif
+	/* Build bad block table */
+	return this->scan_bbt (mtd);
+}
+
+/**
+ * nand_release - [NAND Interface] Free resources held by the NAND device 
+ * @mtd:	MTD device structure
+*/
+void nand_release (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	/* Deregister partitions */
+	del_mtd_partitions (mtd);
+#endif
+	/* Deregister the device */
+/* XXX U-BOOT XXX */
+#if 0
+	del_mtd_device (mtd);
+#endif
+	/* Free bad block table memory, if allocated */
+	if (this->bbt)
+		kfree (this->bbt);
+	/* Buffer allocated by nand_scan ? */
+	if (this->options & NAND_OOBBUF_ALLOC)
+		kfree (this->oob_buf);
+	/* Buffer allocated by nand_scan ? */
+	if (this->options & NAND_DATABUF_ALLOC)
+		kfree (this->data_buf);
+}
+
+#endif
diff --git a/drivers/nand/nand_bbt.c b/drivers/nand/nand_bbt.c
new file mode 100644
index 0000000..6f7e05b
--- /dev/null
+++ b/drivers/nand/nand_bbt.c
@@ -0,0 +1,1056 @@
+/*
+ *  drivers/mtd/nand_bbt.c
+ *
+ *  Overview:
+ *   Bad block table support for the NAND driver
+ *   
+ *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Description:
+ *
+ * When nand_scan_bbt is called, then it tries to find the bad block table 
+ * depending on the options in the bbt descriptor(s). If a bbt is found 
+ * then the contents are read and the memory based bbt is created. If a 
+ * mirrored bbt is selected then the mirror is searched too and the
+ * versions are compared. If the mirror has a greater version number 
+ * than the mirror bbt is used to build the memory based bbt.
+ * If the tables are not versioned, then we "or" the bad block information.
+ * If one of the bbt's is out of date or does not exist it is (re)created. 
+ * If no bbt exists at all then the device is scanned for factory marked 
+ * good / bad blocks and the bad block tables are created. 
+ *
+ * For manufacturer created bbts like the one found on M-SYS DOC devices 
+ * the bbt is searched and read but never created
+ *
+ * The autogenerated bad block table is located in the last good blocks 
+ * of the device. The table is mirrored, so it can be updated eventually. 
+ * The table is marked in the oob area with an ident pattern and a version 
+ * number which indicates which of both tables is more up to date.
+ *
+ * The table uses 2 bits per block
+ * 11b: 	block is good
+ * 00b: 	block is factory marked bad
+ * 01b, 10b: 	block is marked bad due to wear
+ *
+ * The memory bad block table uses the following scheme:
+ * 00b:		block is good
+ * 01b:		block is marked bad due to wear
+ * 10b:		block is reserved (to protect the bbt area)
+ * 11b:		block is factory marked bad
+ * 
+ * Multichip devices like DOC store the bad block info per floor.
+ *
+ * Following assumptions are made:
+ * - bbts start at a page boundary, if autolocated on a block boundary
+ * - the space neccecary for a bbt in FLASH does not exceed a block boundary
+ * 
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <malloc.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include <asm/errno.h>
+
+/** 
+ * check_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf:	the buffer to search
+ * @len:	the length of buffer to search
+ * @paglen:	the pagelength
+ * @td:		search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers.
+ * If the SCAN_EMPTY option is set then check, if all bytes except the
+ * pattern area contain 0xff
+ *
+*/
+static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+{
+	int i, end;
+	uint8_t *p = buf;
+
+	end = paglen + td->offs;
+	if (td->options & NAND_BBT_SCANEMPTY) {
+		for (i = 0; i < end; i++) {
+			if (p[i] != 0xff)
+				return -1;
+		}
+	}	
+	p += end;
+	
+	/* Compare the pattern */
+	for (i = 0; i < td->len; i++) {
+		if (p[i] != td->pattern[i])
+			return -1;
+	}
+
+	p += td->len;
+	end += td->len;
+	if (td->options & NAND_BBT_SCANEMPTY) {
+		for (i = end; i < len; i++) {
+			if (*p++ != 0xff)
+				return -1;
+		}
+	}
+	return 0;
+}
+
+/**
+ * read_bbt - [GENERIC] Read the bad block table starting from page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @page:	the starting page
+ * @num:	the number of bbt descriptors to read
+ * @bits:	number of bits per block
+ * @offs:	offset in the memory table
+ * @reserved_block_code:	Pattern to identify reserved blocks
+ *
+ * Read the bad block table starting from page.
+ *
+ */
+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, 
+	int bits, int offs, int reserved_block_code)
+{
+	int res, i, j, act = 0;
+	struct nand_chip *this = mtd->priv;
+	size_t retlen, len, totlen;
+	loff_t from;
+	uint8_t msk = (uint8_t) ((1 << bits) - 1);
+
+	totlen = (num * bits) >> 3;
+	from = ((loff_t)page) << this->page_shift;
+	
+	while (totlen) {
+		len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
+		res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
+		if (res < 0) {
+			if (retlen != len) {
+				printk (KERN_INFO "nand_bbt: Error reading bad block table\n");
+				return res;
+			}
+			printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
+		}	
+
+		/* Analyse data */
+		for (i = 0; i < len; i++) {
+			uint8_t dat = buf[i];
+			for (j = 0; j < 8; j += bits, act += 2) {
+				uint8_t tmp = (dat >> j) & msk;
+				if (tmp == msk)
+					continue;
+				if (reserved_block_code &&
+				    (tmp == reserved_block_code)) {
+					printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
+						((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+					continue;
+				}
+				/* Leave it for now, if its matured we can move this
+				 * message to MTD_DEBUG_LEVEL0 */
+				printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
+					((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+				/* Factory marked bad or worn out ? */	
+				if (tmp == 0)
+					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
+				else
+					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+			}	
+		}
+		totlen -= len;
+		from += len;
+	}
+	return 0;
+}
+
+/**
+ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @chip:	read the table for a specific chip, -1 read all chips.
+ *		Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Read the bad block table for all chips starting at a given page
+ * We assume that the bbt bits are in consecutive order.
+*/
+static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	int res = 0, i;
+	int bits;
+
+	bits = td->options & NAND_BBT_NRBITS_MSK;
+	if (td->options & NAND_BBT_PERCHIP) {
+		int offs = 0;
+		for (i = 0; i < this->numchips; i++) {
+			if (chip == -1 || chip == i)
+				res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
+			if (res)
+				return res;
+			offs += this->chipsize >> (this->bbt_erase_shift + 2);
+		}
+	} else {
+		res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
+		if (res)
+			return res;
+	}
+	return 0;
+}
+
+/**
+ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ *
+ * Read the bad block table(s) for all chips starting at a given page
+ * We assume that the bbt bits are in consecutive order.
+ *
+*/
+static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td,
+	struct nand_bbt_descr *md)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* Read the primary version, if available */	
+	if (td->options & NAND_BBT_VERSION) {
+		nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		td->version[0] = buf[mtd->oobblock + td->veroffs];
+		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
+	}
+
+	/* Read the mirror version, if available */	
+	if (md && (md->options & NAND_BBT_VERSION)) {
+		nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		md->version[0] = buf[mtd->oobblock + md->veroffs];
+		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
+	}
+
+	return 1;
+}
+
+/**
+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @bd:		descriptor for the good/bad block search pattern
+ * @chip:	create the table for a specific chip, -1 read all chips.
+ *		Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Create a bad block table by scanning the device
+ * for the given good/bad block identify pattern
+ */
+static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, j, numblocks, len, scanlen;
+	int startblock;
+	loff_t from;
+	size_t readlen, ooblen;
+
+	printk (KERN_INFO "Scanning device for bad blocks\n");
+
+	if (bd->options & NAND_BBT_SCANALLPAGES)
+		len = 1 << (this->bbt_erase_shift - this->page_shift);
+	else {
+		if (bd->options & NAND_BBT_SCAN2NDPAGE)
+			len = 2;
+		else	
+			len = 1;
+	}
+	scanlen	= mtd->oobblock + mtd->oobsize;
+	readlen = len * mtd->oobblock;
+	ooblen = len * mtd->oobsize;
+
+	if (chip == -1) {
+		/* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
+		 * makes shifting and masking less painful */
+		numblocks = mtd->size >> (this->bbt_erase_shift - 1);
+		startblock = 0;
+		from = 0;
+	} else {
+		if (chip >= this->numchips) {
+			printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+				chip + 1, this->numchips);
+			return;	
+		}
+		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
+		startblock = chip * numblocks;
+		numblocks += startblock;
+		from = startblock << (this->bbt_erase_shift - 1);
+	}
+	
+	for (i = startblock; i < numblocks;) {
+		nand_read_raw (mtd, buf, from, readlen, ooblen);
+		for (j = 0; j < len; j++) {
+			if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+				this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+				printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
+					i >> 1, (unsigned int) from);
+				break;
+			}
+		}
+		i += 2;
+		from += (1 << this->bbt_erase_shift);
+	}
+}
+
+/**
+ * search_bbt - [GENERIC] scan the device for a specific bad block table
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table
+ *
+ * Read the bad block table by searching for a given ident pattern.
+ * Search is preformed either from the beginning up or from the end of 
+ * the device downwards. The search starts always at the start of a
+ * block.
+ * If the option NAND_BBT_PERCHIP is given, each chip is searched 
+ * for a bbt, which contains the bad block information of this chip.
+ * This is neccecary to provide support for certain DOC devices.
+ *
+ * The bbt ident pattern resides in the oob area of the first page 
+ * in a block. 
+ */
+static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, chips;
+	int bits, startblock, block, dir;
+	int scanlen = mtd->oobblock + mtd->oobsize;
+	int bbtblocks;
+
+	/* Search direction top -> down ? */
+	if (td->options & NAND_BBT_LASTBLOCK) {
+		startblock = (mtd->size >> this->bbt_erase_shift) -1;
+		dir = -1;
+	} else {
+		startblock = 0;	
+		dir = 1;
+	}	
+	
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chips = this->numchips;
+		bbtblocks = this->chipsize >> this->bbt_erase_shift;
+		startblock &= bbtblocks - 1;
+	} else {
+		chips = 1;
+		bbtblocks = mtd->size >> this->bbt_erase_shift;
+	}
+	
+	/* Number of bits for each erase block in the bbt */
+	bits = td->options & NAND_BBT_NRBITS_MSK;
+	
+	for (i = 0; i < chips; i++) {
+		/* Reset version information */
+		td->version[i] = 0;	
+		td->pages[i] = -1;
+		/* Scan the maximum number of blocks */
+		for (block = 0; block < td->maxblocks; block++) {
+			int actblock = startblock + dir * block;
+			/* Read first page */
+			nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); 
+			if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
+				td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
+				if (td->options & NAND_BBT_VERSION) {
+					td->version[i] = buf[mtd->oobblock + td->veroffs];
+				}
+				break;
+			}
+		}
+		startblock += this->chipsize >> this->bbt_erase_shift;
+	}
+	/* Check, if we found a bbt for each requested chip */
+	for (i = 0; i < chips; i++) {
+		if (td->pages[i] == -1)
+			printk (KERN_WARNING "Bad block table not found for chip %d\n", i);
+		else
+			printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
+	}
+	return 0;	
+}
+
+/**
+ * search_read_bbts - [GENERIC] scan the device for bad block table(s)
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ *
+ * Search and read the bad block table(s)
+*/
+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, 
+	struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+{
+	/* Search the primary table */
+	search_bbt (mtd, buf, td);
+		
+	/* Search the mirror table */
+	if (md)
+		search_bbt (mtd, buf, md);
+	
+	/* Force result check */
+	return 1;	
+}
+	
+
+/** 
+ * write_bbt - [GENERIC] (Re)write the bad block table
+ *
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @td:		descriptor for the bad block table 
+ * @md:		descriptor for the bad block table mirror
+ * @chipsel:	selector for a specific chip, -1 for all
+ *
+ * (Re)write the bad block table
+ *
+*/
+static int write_bbt (struct mtd_info *mtd, uint8_t *buf, 
+	struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
+{
+	struct nand_chip *this = mtd->priv;
+	struct nand_oobinfo oobinfo;
+	struct erase_info einfo;
+	int i, j, res, chip = 0;
+	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
+	int nrchips, bbtoffs, pageoffs;
+	uint8_t msk[4];
+	uint8_t rcode = td->reserved_block_code;
+	size_t retlen, len = 0;
+	loff_t to;
+
+	if (!rcode)
+		rcode = 0xff;
+	/* Write bad block table per chip rather than per device ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
+		/* Full device write or specific chip ? */	
+		if (chipsel == -1) {
+			nrchips = this->numchips;
+		} else {
+			nrchips = chipsel + 1;
+			chip = chipsel;
+		}
+	} else {
+		numblocks = (int) (mtd->size >> this->bbt_erase_shift);
+		nrchips = 1;
+	}	
+	
+	/* Loop through the chips */
+	for (; chip < nrchips; chip++) {
+		
+		/* There was already a version of the table, reuse the page 
+		 * This applies for absolute placement too, as we have the 
+		 * page nr. in td->pages.
+		 */
+		if (td->pages[chip] != -1) {
+			page = td->pages[chip];
+			goto write;
+		}	
+
+		/* Automatic placement of the bad block table */
+		/* Search direction top -> down ? */
+		if (td->options & NAND_BBT_LASTBLOCK) {
+			startblock = numblocks * (chip + 1) - 1;
+			dir = -1;
+		} else {
+			startblock = chip * numblocks;
+			dir = 1;
+		}	
+
+		for (i = 0; i < td->maxblocks; i++) {
+			int block = startblock + dir * i;
+			/* Check, if the block is bad */
+			switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) {
+			case 0x01:
+			case 0x03:
+				continue;
+			}
+			page = block << (this->bbt_erase_shift - this->page_shift);
+			/* Check, if the block is used by the mirror table */
+			if (!md || md->pages[chip] != page)
+				goto write;
+		}
+		printk (KERN_ERR "No space left to write bad block table\n");
+		return -ENOSPC;
+write:	
+
+		/* Set up shift count and masks for the flash table */
+		bits = td->options & NAND_BBT_NRBITS_MSK;
+		switch (bits) {
+		case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break;
+		case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break;
+		case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break;
+		case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
+		default: return -EINVAL;
+		}
+		
+		bbtoffs = chip * (numblocks >> 2);
+		
+		to = ((loff_t) page) << this->page_shift;
+
+		memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
+		oobinfo.useecc = MTD_NANDECC_PLACEONLY;
+		
+		/* Must we save the block contents ? */
+		if (td->options & NAND_BBT_SAVECONTENT) {
+			/* Make it block aligned */
+			to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+			len = 1 << this->bbt_erase_shift;
+			res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+			if (res < 0) {
+				if (retlen != len) {
+					printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n");
+					return res;
+				}
+				printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n");
+			}
+			/* Calc the byte offset in the buffer */
+			pageoffs = page - (int)(to >> this->page_shift);
+			offs = pageoffs << this->page_shift;
+			/* Preset the bbt area with 0xff */
+			memset (&buf[offs], 0xff, (size_t)(numblocks >> sft));
+			/* Preset the bbt's oob area with 0xff */
+			memset (&buf[len + pageoffs * mtd->oobsize], 0xff,
+				((len >> this->page_shift) - pageoffs) * mtd->oobsize);
+			if (td->options & NAND_BBT_VERSION) {
+				buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip];
+			}
+		} else {
+			/* Calc length */
+			len = (size_t) (numblocks >> sft);
+			/* Make it page aligned ! */
+			len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1);
+			/* Preset the buffer with 0xff */
+			memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize);
+			offs = 0;
+			/* Pattern is located in oob area of first page */
+			memcpy (&buf[len + td->offs], td->pattern, td->len);
+			if (td->options & NAND_BBT_VERSION) {
+				buf[len + td->veroffs] = td->version[chip];
+			}
+		}
+	
+		/* walk through the memory table */
+		for (i = 0; i < numblocks; ) {
+			uint8_t dat;
+			dat = this->bbt[bbtoffs + (i >> 2)];
+			for (j = 0; j < 4; j++ , i++) {
+				int sftcnt = (i << (3 - sft)) & sftmsk;
+				/* Do not store the reserved bbt blocks ! */
+				buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt);
+				dat >>= 2;
+			}
+		}
+		
+		memset (&einfo, 0, sizeof (einfo));
+		einfo.mtd = mtd;
+		einfo.addr = (unsigned long) to;
+		einfo.len = 1 << this->bbt_erase_shift;
+		res = nand_erase_nand (mtd, &einfo, 1);
+		if (res < 0) {
+			printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
+			return res;
+		}
+	
+		res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+		if (res < 0) {
+			printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
+			return res;
+		}
+		printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n", 
+			(unsigned int) to, td->version[chip]);
+	
+		/* Mark it as used */
+		td->pages[chip] = page;
+	}	
+	return 0;
+}
+
+/**
+ * nand_memory_bbt - [GENERIC] create a memory based bad block table
+ * @mtd:	MTD device structure
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function creates a memory based bbt by scanning the device 
+ * for manufacturer / software marked good / bad blocks
+*/
+static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct nand_chip *this = mtd->priv;
+
+	/* Ensure that we only scan for the pattern and nothing else */
+	bd->options = 0;
+	create_bbt (mtd, this->data_buf, bd, -1);
+	return 0;
+}
+
+/**
+ * check_create - [GENERIC] create and write bbt(s) if neccecary
+ * @mtd:	MTD device structure
+ * @buf:	temporary buffer
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function checks the results of the previous call to read_bbt
+ * and creates / updates the bbt(s) if neccecary
+ * Creation is neccecary if no bbt was found for the chip/device
+ * Update is neccecary if one of the tables is missing or the
+ * version nr. of one table is less than the other
+*/
+static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+{
+	int i, chips, writeops, chipsel, res;
+	struct nand_chip *this = mtd->priv;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+	struct nand_bbt_descr *rd, *rd2;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) 
+		chips = this->numchips;
+	else 
+		chips = 1;
+	
+	for (i = 0; i < chips; i++) {
+		writeops = 0;
+		rd = NULL;
+		rd2 = NULL;
+		/* Per chip or per device ? */
+		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
+		/* Mirrored table avilable ? */
+		if (md) {
+			if (td->pages[i] == -1 && md->pages[i] == -1) {
+				writeops = 0x03;
+				goto create;
+			}
+
+			if (td->pages[i] == -1) {
+				rd = md;				
+				td->version[i] = md->version[i];
+				writeops = 1;
+				goto writecheck;
+			}
+
+			if (md->pages[i] == -1) {
+				rd = td;
+				md->version[i] = td->version[i];
+				writeops = 2;
+				goto writecheck;
+			}
+
+			if (td->version[i] == md->version[i]) {
+				rd = td;
+				if (!(td->options & NAND_BBT_VERSION))
+					rd2 = md;
+				goto writecheck;
+			}	
+
+			if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+				rd = td;
+				md->version[i] = td->version[i];
+				writeops = 2;
+			} else {
+				rd = md;
+				td->version[i] = md->version[i];
+				writeops = 1;
+			}
+
+			goto writecheck;
+
+		} else {
+			if (td->pages[i] == -1) {
+				writeops = 0x01;
+				goto create;
+			}
+			rd = td;
+			goto writecheck;
+		}
+create:
+		/* Create the bad block table by scanning the device ? */
+		if (!(td->options & NAND_BBT_CREATE))
+			continue;	
+		
+		/* Create the table in memory by scanning the chip(s) */
+		create_bbt (mtd, buf, bd, chipsel);
+		
+		td->version[i] = 1;
+		if (md)
+			md->version[i] = 1;	
+writecheck:	
+		/* read back first ? */
+		if (rd)
+			read_abs_bbt (mtd, buf, rd, chipsel);
+		/* If they weren't versioned, read both. */
+		if (rd2)
+			read_abs_bbt (mtd, buf, rd2, chipsel);
+
+		/* Write the bad block table to the device ? */
+		if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+			res = write_bbt (mtd, buf, td, md, chipsel);
+			if (res < 0)
+				return res;
+		}
+		
+		/* Write the mirror bad block table to the device ? */
+		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+			res = write_bbt (mtd, buf, md, td, chipsel);
+			if (res < 0)
+				return res;
+		}
+	}
+	return 0;	
+}
+
+/**
+ * mark_bbt_regions - [GENERIC] mark the bad block table regions 
+ * @mtd:	MTD device structure
+ * @td:		bad block table descriptor
+ *
+ * The bad block table regions are marked as "bad" to prevent
+ * accidental erasures / writes. The regions are identified by
+ * the mark 0x02.
+*/
+static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+	struct nand_chip *this = mtd->priv;
+	int i, j, chips, block, nrblocks, update;
+	uint8_t oldval, newval;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chips = this->numchips;
+		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+	} else {
+		chips = 1;
+		nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
+	}	
+	
+	for (i = 0; i < chips; i++) {
+		if ((td->options & NAND_BBT_ABSPAGE) ||
+		    !(td->options & NAND_BBT_WRITE)) {
+		    	if (td->pages[i] == -1) continue;
+			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
+			block <<= 1;		
+			oldval = this->bbt[(block >> 3)];
+			newval = oldval | (0x2 << (block & 0x06));
+			this->bbt[(block >> 3)] = newval;
+			if ((oldval != newval) && td->reserved_block_code)
+				nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1));
+			continue;
+		}
+		update = 0;
+		if (td->options & NAND_BBT_LASTBLOCK)
+			block = ((i + 1) * nrblocks) - td->maxblocks;
+		else	
+			block = i * nrblocks;
+		block <<= 1;	
+		for (j = 0; j < td->maxblocks; j++) {
+			oldval = this->bbt[(block >> 3)];
+			newval = oldval | (0x2 << (block & 0x06));
+			this->bbt[(block >> 3)] = newval;
+			if (oldval != newval) update = 1;
+			block += 2;
+		}	
+		/* If we want reserved blocks to be recorded to flash, and some
+		   new ones have been marked, then we need to update the stored
+		   bbts.  This should only happen once. */
+		if (update && td->reserved_block_code)
+			nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1));
+	}
+}
+
+/**
+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
+ * @mtd:	MTD device structure
+ * @bd:		descriptor for the good/bad block search pattern
+ *
+ * The function checks, if a bad block table(s) is/are already 
+ * available. If not it scans the device for manufacturer
+ * marked good / bad blocks and writes the bad block table(s) to
+ * the selected place.
+ *
+ * The bad block table memory is allocated here. It must be freed
+ * by calling the nand_free_bbt function.
+ *
+*/
+int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct nand_chip *this = mtd->priv;
+	int len, res = 0;
+	uint8_t *buf;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+
+	len = mtd->size >> (this->bbt_erase_shift + 2);
+	/* Allocate memory (2bit per block) */
+	this->bbt = kmalloc (len, GFP_KERNEL);
+	if (!this->bbt) {
+		printk (KERN_ERR "nand_scan_bbt: Out of memory\n");
+		return -ENOMEM;
+	}
+	/* Clear the memory bad block table */
+	memset (this->bbt, 0x00, len);
+
+	/* If no primary table decriptor is given, scan the device
+	 * to build a memory based bad block table
+	 */
+	if (!td)
+		return nand_memory_bbt(mtd, bd);
+
+	/* Allocate a temporary buffer for one eraseblock incl. oob */
+	len = (1 << this->bbt_erase_shift);
+	len += (len >> this->page_shift) * mtd->oobsize;
+	buf = kmalloc (len, GFP_KERNEL);
+	if (!buf) {
+		printk (KERN_ERR "nand_bbt: Out of memory\n");
+		kfree (this->bbt);
+		this->bbt = NULL;
+		return -ENOMEM;
+	}
+	
+	/* Is the bbt at a given page ? */
+	if (td->options & NAND_BBT_ABSPAGE) {
+		res = read_abs_bbts (mtd, buf, td, md);
+	} else {	
+		/* Search the bad block table using a pattern in oob */
+		res = search_read_bbts (mtd, buf, td, md);
+	}	
+
+	if (res) 
+		res = check_create (mtd, buf, bd);
+	
+	/* Prevent the bbt regions from erasing / writing */
+	mark_bbt_region (mtd, td);
+	if (md)
+		mark_bbt_region (mtd, md);
+	
+	kfree (buf);
+	return res;
+}
+
+
+/**
+ * nand_update_bbt - [NAND Interface] update bad block table(s) 
+ * @mtd:	MTD device structure
+ * @offs:	the offset of the newly marked block
+ *
+ * The function updates the bad block table(s)
+*/
+int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
+{
+	struct nand_chip *this = mtd->priv;
+	int len, res = 0, writeops = 0;
+	int chip, chipsel;
+	uint8_t *buf;
+	struct nand_bbt_descr *td = this->bbt_td;
+	struct nand_bbt_descr *md = this->bbt_md;
+
+	if (!this->bbt || !td)
+		return -EINVAL;
+
+	len = mtd->size >> (this->bbt_erase_shift + 2);
+	/* Allocate a temporary buffer for one eraseblock incl. oob */
+	len = (1 << this->bbt_erase_shift);
+	len += (len >> this->page_shift) * mtd->oobsize;
+	buf = kmalloc (len, GFP_KERNEL);
+	if (!buf) {
+		printk (KERN_ERR "nand_update_bbt: Out of memory\n");
+		return -ENOMEM;
+	}
+	
+	writeops = md != NULL ? 0x03 : 0x01;
+
+	/* Do we have a bbt per chip ? */
+	if (td->options & NAND_BBT_PERCHIP) {
+		chip = (int) (offs >> this->chip_shift);
+		chipsel = chip;
+	} else {
+		chip = 0;
+		chipsel = -1;
+	}
+
+	td->version[chip]++;
+	if (md)
+		md->version[chip]++;	
+
+	/* Write the bad block table to the device ? */
+	if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+		res = write_bbt (mtd, buf, td, md, chipsel);
+		if (res < 0)
+			goto out;
+	}
+	/* Write the mirror bad block table to the device ? */
+	if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+		res = write_bbt (mtd, buf, md, td, chipsel);
+	}
+
+out:	
+	kfree (buf);
+	return res;
+}
+
+/* Define some generic bad / good block scan pattern which are used 
+ * while scanning a device for factory marked good / bad blocks
+ * 
+ * The memory based patterns just 
+ */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+	.options = 0,
+	.offs = 5,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr smallpage_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 5,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_bbt_descr largepage_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
+
+static struct nand_bbt_descr agand_flashbased = {
+	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.offs = 0x20,
+	.len = 6,
+	.pattern = scan_agand_pattern
+};
+
+/* Generic flash bbt decriptors
+*/
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	8,
+	.len = 4,
+	.veroffs = 12,
+	.maxblocks = 4,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs =	8,
+	.len = 4,
+	.veroffs = 12,
+	.maxblocks = 4,
+	.pattern = mirror_pattern
+};
+
+/**
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device 
+ * @mtd:	MTD device structure
+ *
+ * This function selects the default bad block table
+ * support for the device and calls the nand_scan_bbt function
+ *
+*/
+int nand_default_bbt (struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	
+	/* Default for AG-AND. We must use a flash based 
+	 * bad block table as the devices have factory marked
+	 * _good_ blocks. Erasing those blocks leads to loss
+	 * of the good / bad information, so we _must_ store
+	 * this information in a good / bad table during 
+	 * startup
+	*/
+	if (this->options & NAND_IS_AND) {
+		/* Use the default pattern descriptors */
+		if (!this->bbt_td) {	
+			this->bbt_td = &bbt_main_descr;
+			this->bbt_md = &bbt_mirror_descr;
+		}	
+		this->options |= NAND_USE_FLASH_BBT;
+		return nand_scan_bbt (mtd, &agand_flashbased);
+	}
+	
+	
+	/* Is a flash based bad block table requested ? */
+	if (this->options & NAND_USE_FLASH_BBT) {
+		/* Use the default pattern descriptors */	
+		if (!this->bbt_td) {	
+			this->bbt_td = &bbt_main_descr;
+			this->bbt_md = &bbt_mirror_descr;
+		}
+		if (!this->badblock_pattern) {
+			this->badblock_pattern = (mtd->oobblock > 512) ?
+				&largepage_flashbased : &smallpage_flashbased;
+		}
+	} else {
+		this->bbt_td = NULL;
+		this->bbt_md = NULL;
+		if (!this->badblock_pattern) {
+			this->badblock_pattern = (mtd->oobblock > 512) ?
+				&largepage_memorybased : &smallpage_memorybased;
+		}
+	}
+	return nand_scan_bbt (mtd, this->badblock_pattern);
+}
+
+/**
+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad 
+ * @mtd:	MTD device structure
+ * @offs:	offset in the device
+ * @allowbbt:	allow access to bad block table region
+ *
+*/
+int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	struct nand_chip *this = mtd->priv;
+	int block;
+	uint8_t	res;
+	
+	/* Get block number * 2 */
+	block = (int) (offs >> (this->bbt_erase_shift - 1));
+	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+
+	DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", 
+		(unsigned int)offs, res, block >> 1);
+
+	switch ((int)res) {
+	case 0x00:	return 0;
+	case 0x01:	return 1;
+	case 0x02:	return allowbbt ? 0 : 1;
+	}
+	return 1;
+}
+
+#endif
diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c
new file mode 100644
index 0000000..dc9db4b
--- /dev/null
+++ b/drivers/nand/nand_ecc.c
@@ -0,0 +1,244 @@
+/*
+ * This file contains an ECC algorithm from Toshiba that detects and
+ * corrects 1 bit errors in a 256 byte block of data.
+ *
+ * drivers/mtd/nand/nand_ecc.c
+ *
+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
+ *                         Toshiba America Electronics Components, Inc.
+ *
+ * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ * 
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * 
+ * As a special exception, if other files instantiate templates or use
+ * macros or inline functions from these files, or you compile these
+ * files and link them with other works to produce a work based on these
+ * files, these files do not by themselves cause the resulting work to be
+ * covered by the GNU General Public License. However the source code for
+ * these files must still be made available in accordance with section (3)
+ * of the GNU General Public License.
+ * 
+ * This exception does not invalidate any other reasons why a work based on
+ * this file might be covered by the GNU General Public License.
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+/*
+ * Pre-calculated 256-way 1 byte column parity
+ */
+static const u_char nand_ecc_precalc_table[] = {
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+};
+
+
+/**
+ * nand_trans_result - [GENERIC] create non-inverted ECC
+ * @reg2:	line parity reg 2
+ * @reg3:	line parity reg 3
+ * @ecc_code:	ecc 
+ *
+ * Creates non-inverted ECC code from line parity
+ */
+static void nand_trans_result(u_char reg2, u_char reg3,
+	u_char *ecc_code)
+{
+	u_char a, b, i, tmp1, tmp2;
+	
+	/* Initialize variables */
+	a = b = 0x80;
+	tmp1 = tmp2 = 0;
+	
+	/* Calculate first ECC byte */
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP15,13,11,9 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP14,12,10,8 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+	
+	/* Calculate second ECC byte */
+	b = 0x80;
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP7,5,3,1 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP6,4,2,0 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+	
+	/* Store two of the ECC bytes */
+	ecc_code[0] = tmp1;
+	ecc_code[1] = tmp2;
+}
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * @mtd:	MTD block structure
+ * @dat:	raw data
+ * @ecc_code:	buffer for ECC
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	u_char idx, reg1, reg2, reg3;
+	int j;
+	
+	/* Initialize variables */
+	reg1 = reg2 = reg3 = 0;
+	ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
+	
+	/* Build up column parity */ 
+	for(j = 0; j < 256; j++) {
+		
+		/* Get CP0 - CP5 from table */
+		idx = nand_ecc_precalc_table[dat[j]];
+		reg1 ^= (idx & 0x3f);
+		
+		/* All bit XOR = 1 ? */
+		if (idx & 0x40) {
+			reg3 ^= (u_char) j;
+			reg2 ^= ~((u_char) j);
+		}
+	}
+	
+	/* Create non-inverted ECC code from line parity */
+	nand_trans_result(reg2, reg3, ecc_code);
+	
+	/* Calculate final ECC code */
+	ecc_code[0] = ~ecc_code[0];
+	ecc_code[1] = ~ecc_code[1];
+	ecc_code[2] = ((~reg1) << 2) | 0x03;
+	return 0;
+}
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:	MTD block structure
+ * @dat:	raw data read from the chip
+ * @read_ecc:	ECC from the chip
+ * @calc_ecc:	the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+	u_char a, b, c, d1, d2, d3, add, bit, i;
+	
+	/* Do error detection */ 
+	d1 = calc_ecc[0] ^ read_ecc[0];
+	d2 = calc_ecc[1] ^ read_ecc[1];
+	d3 = calc_ecc[2] ^ read_ecc[2];
+	
+	if ((d1 | d2 | d3) == 0) {
+		/* No errors */
+		return 0;
+	}
+	else {
+		a = (d1 ^ (d1 >> 1)) & 0x55;
+		b = (d2 ^ (d2 >> 1)) & 0x55;
+		c = (d3 ^ (d3 >> 1)) & 0x54;
+		
+		/* Found and will correct single bit error in the data */
+		if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
+			c = 0x80;
+			add = 0;
+			a = 0x80;
+			for (i=0; i<4; i++) {
+				if (d1 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			c = 0x80;
+			for (i=0; i<4; i++) {
+				if (d2 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			bit = 0;
+			b = 0x04;
+			c = 0x80;
+			for (i=0; i<3; i++) {
+				if (d3 & c)
+					bit |= b;
+				c >>= 2;
+				b >>= 1;
+			}
+			b = 0x01;
+			a = dat[add];
+			a ^= (b << bit);
+			dat[add] = a;
+			return 1;
+		}
+		else {
+			i = 0;
+			while (d1) {
+				if (d1 & 0x01)
+					++i;
+				d1 >>= 1;
+			}
+			while (d2) {
+				if (d2 & 0x01)
+					++i;
+				d2 >>= 1;
+			}
+			while (d3) {
+				if (d3 & 0x01)
+					++i;
+				d3 >>= 1;
+			}
+			if (i == 1) {
+				/* ECC Code Error Correction */
+				read_ecc[0] = calc_ecc[0];
+				read_ecc[1] = calc_ecc[1];
+				read_ecc[2] = calc_ecc[2];
+				return 2;
+			}
+			else {
+				/* Uncorrectable Error */
+				return -1;
+			}
+		}
+	}
+	
+	/* Should never happen */
+	return -1;
+}
+
+#endif	/* CONFIG_COMMANDS & CFG_CMD_NAND */
diff --git a/drivers/nand/nand_ids.c b/drivers/nand/nand_ids.c
new file mode 100644
index 0000000..5df1e89
--- /dev/null
+++ b/drivers/nand/nand_ids.c
@@ -0,0 +1,127 @@
+/*
+ *  drivers/mtd/nandids.c
+ *
+ *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
+  *
+ * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <linux/mtd/nand.h>
+
+/*
+*	Chip ID list
+*	
+*	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
+*	options
+* 
+* 	Pagesize; 0, 256, 512
+*	0 	get this information from the extended chip ID
++	256	256 Byte page size
+*	512	512 Byte page size	
+*/
+struct nand_flash_dev nand_flash_ids[] = {
+	{"NAND 1MiB 5V 8-bit", 		0x6e, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 5V 8-bit", 		0x64, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 5V 8-bit", 		0x6b, 512, 4, 0x2000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xe8, 256, 1, 0x1000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xec, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 3,3V 8-bit", 	0xea, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xd5, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe3, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe5, 512, 4, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xd6, 512, 8, 0x2000, 0},
+	
+	{"NAND 8MiB 1,8V 8-bit", 	0x39, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xe6, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 1,8V 16-bit", 	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	{"NAND 8MiB 3,3V 16-bit", 	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	
+	{"NAND 16MiB 1,8V 8-bit", 	0x33, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 3,3V 8-bit", 	0x73, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 1,8V 16-bit", 	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 16MiB 3,3V 16-bit", 	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 32MiB 1,8V 8-bit", 	0x35, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 3,3V 8-bit", 	0x75, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 1,8V 16-bit", 	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 32MiB 3,3V 16-bit", 	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 64MiB 1,8V 8-bit", 	0x36, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 3,3V 8-bit", 	0x76, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 1,8V 16-bit", 	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 64MiB 3,3V 16-bit", 	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 128MiB 1,8V 8-bit", 	0x78, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 3,3V 8-bit", 	0x79, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 1,8V 16-bit", 	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 128MiB 3,3V 16-bit", 	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
+
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
+	
+	/* These are the new chips with large page size. The pagesize
+	* and the erasesize is determined from the extended id bytes
+	*/
+	/* 1 Gigabit */
+	{"NAND 128MiB 1,8V 8-bit", 	0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 8-bit", 	0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 1,8V 16-bit", 	0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 16-bit", 	0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 2 Gigabit */
+	{"NAND 256MiB 1,8V 8-bit", 	0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 8-bit", 	0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 1,8V 16-bit", 	0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 16-bit", 	0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 4 Gigabit */
+	{"NAND 512MiB 1,8V 8-bit", 	0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 1,8V 16-bit", 	0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 16-bit", 	0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 8 Gigabit */
+	{"NAND 1GiB 1,8V 8-bit", 	0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 8-bit", 	0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 1,8V 16-bit", 	0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 16-bit", 	0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 16 Gigabit */
+	{"NAND 2GiB 1,8V 8-bit", 	0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 8-bit", 	0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 1,8V 16-bit", 	0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 16-bit", 	0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! 
+	 * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
+	 * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
+	 * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
+	 * There are more speed improvements for reads and writes possible, but not implemented now 
+	 */
+	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
+
+	{NULL,}
+};
+
+/*
+*	Manufacturer ID list
+*/
+struct nand_manufacturers nand_manuf_ids[] = {
+	{NAND_MFR_TOSHIBA, "Toshiba"},
+	{NAND_MFR_SAMSUNG, "Samsung"},
+	{NAND_MFR_FUJITSU, "Fujitsu"},
+	{NAND_MFR_NATIONAL, "National"},
+	{NAND_MFR_RENESAS, "Renesas"},
+	{NAND_MFR_STMICRO, "ST Micro"},
+	{0x0, "Unknown"}
+};
+#endif