board_f: Drop setup_dram_config() wrapper
By making dram_init_banksize() return an error code we can drop the
wrapper. Adjust this and clean up all implementations.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
index 533e99e..5f4c634 100644
--- a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
+++ b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
@@ -62,10 +62,12 @@
}
/* This is called after dram_init() so use get_ram_size result */
-void dram_init_banksize(void)
+int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
+
+ return 0;
}
#ifdef CONFIG_MMC_SDHCI_KONA
diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
index b868812..f5b94f6 100644
--- a/board/broadcom/bcm28155_ap/bcm28155_ap.c
+++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
@@ -69,10 +69,12 @@
}
/* This is called after dram_init() so use get_ram_size result */
-void dram_init_banksize(void)
+int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
+
+ return 0;
}
#ifdef CONFIG_MMC_SDHCI_KONA
diff --git a/board/broadcom/bcm_ep/board.c b/board/broadcom/bcm_ep/board.c
index c28b203..a409622 100644
--- a/board/broadcom/bcm_ep/board.c
+++ b/board/broadcom/bcm_ep/board.c
@@ -37,10 +37,12 @@
return 0;
}
-void dram_init_banksize(void)
+int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
+
+ return 0;
}
int board_early_init_f(void)
diff --git a/board/broadcom/bcmns2/northstar2.c b/board/broadcom/bcmns2/northstar2.c
index a64431d..10279a5 100644
--- a/board/broadcom/bcmns2/northstar2.c
+++ b/board/broadcom/bcmns2/northstar2.c
@@ -43,13 +43,15 @@
return 0;
}
-void dram_init_banksize(void)
+int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+ return 0;
}
void reset_cpu(ulong addr)