reset: rockchip: implement rk3588 lookup table
The current DT bindings for the rk3588 clock use a different ID than the
one that is supposed to be written to the hardware registers.
Thus, we cannot use directly the id provided in the phandle, but rather
use a lookup table to correctly setup the hardware.
This approach has been implemented already in Linux, by commit :
f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Hence, implement a similar approach using the lookup table, and adapt
the existing reset driver to work with SoCs using lookup table.
The file rst-rk3588.c has been copied as much as possible from Linux.
Adapt the clk rk3588 driver as well to bind the reset driver with the
lookup table.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 6801268..e2239a2 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -16,7 +16,7 @@
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_AST2500) += reset-ast2500.o
obj-$(CONFIG_RESET_AST2600) += reset-ast2600.o
-obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o
+obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o rst-rk3588.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_MEDIATEK) += reset-mediatek.o