diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d91b06b..fbc5d7c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -67,6 +67,30 @@
 	  struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
 	  degrees, 3=270 degrees.
 
+config CONSOLE_TRUETYPE
+	bool "Support a console that uses TrueType fonts"
+	depends on DM_VIDEO
+	help
+	  TrueTrype fonts can provide outline-drawing capability rather than
+	  needing to provide a bitmap for each font and size that is needed.
+	  With this option you can adjust the text size and use a variety of
+	  fonts. Note that this is noticeably slower than with normal console.
+
+config CONSOLE_TRUETYPE_SIZE
+	int "TrueType font size"
+	depends on CONSOLE_TRUETYPE
+	default 18
+	help
+	  This sets the font size for the console. The size is measured in
+	  pixels and is the nominal height of a character. Note that fonts
+	  are commonly measured in 'points', being 1/72 inch (about 3.52mm).
+	  However that measurement depends on the size of your display and
+	  there is no standard display density. At present there is not a
+	  method to select the display's physical size, which would allow
+	  U-Boot to calculate the correct font size.
+
+source "drivers/video/fonts/Kconfig"
+
 config VIDEO_VESA
 	bool "Enable VESA video driver support"
 	default n
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4d845d6..c55e6ed 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -16,6 +16,7 @@
 endif
 obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o
 obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
+obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
 endif
 
 obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c
new file mode 100644
index 0000000..b770ad4
--- /dev/null
+++ b/drivers/video/console_truetype.c
@@ -0,0 +1,533 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <video.h>
+#include <video_console.h>
+
+/* Functions needed by stb_truetype.h */
+static int tt_floor(double val)
+{
+	if (val < 0)
+		return (int)(val - 0.999);
+
+	return (int)val;
+}
+
+static int tt_ceil(double val)
+{
+	if (val < 0)
+		return (int)val;
+
+	return (int)(val + 0.999);
+}
+
+static double frac(double val)
+{
+	return val - tt_floor(val);
+}
+
+static double tt_fabs(double x)
+{
+	return x < 0 ? -x : x;
+}
+
+ /*
+  * Simple square root algorithm. This is from:
+  * http://stackoverflow.com/questions/1623375/writing-your-own-square-root-function
+  * Written by Chihung Yu
+  * Creative Commons license
+  * http://creativecommons.org/licenses/by-sa/3.0/legalcode
+  * It has been modified to compile correctly, and for U-Boot style.
+  */
+static double tt_sqrt(double value)
+{
+	double lo = 1.0;
+	double hi = value;
+
+	while (hi - lo > 0.00001) {
+		double mid = lo + (hi - lo) / 2;
+
+		if (mid * mid - value > 0.00001)
+			hi = mid;
+		else
+			lo = mid;
+	}
+
+	return lo;
+}
+
+#define STBTT_ifloor		tt_floor
+#define STBTT_iceil		tt_ceil
+#define STBTT_fabs		tt_fabs
+#define STBTT_sqrt		tt_sqrt
+#define STBTT_malloc(size, u)	((void)(u), malloc(size))
+#define STBTT_free(size, u)	((void)(u), free(size))
+#define STBTT_assert(x)
+#define STBTT_strlen(x)		strlen(x)
+#define STBTT_memcpy		memcpy
+#define STBTT_memset		memset
+
+#define STB_TRUETYPE_IMPLEMENTATION
+#include "stb_truetype.h"
+
+/**
+ * struct pos_info - Records a cursor position
+ *
+ * @xpos_frac:	Fractional X position in pixels (multiplied by VID_FRAC_DIV)
+ * @ypos:	Y position (pixels from the top)
+ */
+struct pos_info {
+	int xpos_frac;
+	int ypos;
+};
+
+/*
+ * Allow one for each character on the command line plus one for each newline.
+ * This is just an estimate, but it should not be exceeded.
+ */
+#define POS_HISTORY_SIZE	(CONFIG_SYS_CBSIZE * 11 / 10)
+
+/**
+ * struct console_tt_priv - Private data for this driver
+ *
+ * @font_size:	Vertical font size in pixels
+ * @font_data:	Pointer to TrueType font file contents
+ * @font:	TrueType font information for the current font
+ * @pos:	List of cursor positions for each character written. This is
+ *		used to handle backspace. We clear the frame buffer between
+ *		the last position and the current position, thus erasing the
+ *		last character. We record enough characters to go back to the
+ *		start of the current command line.
+ * @pos_ptr:	Current position in the position history
+ * @baseline:	Pixel offset of the font's baseline from the cursor position.
+ *		This is the 'ascent' of the font, scaled to pixel coordinates.
+ *		It measures the distance from the baseline to the top of the
+ *		font.
+ * @scale:	Scale of the font. This is calculated from the pixel height
+ *		of the font. It is used by the STB library to generate images
+ *		of the correct size.
+ */
+struct console_tt_priv {
+	int font_size;
+	u8 *font_data;
+	stbtt_fontinfo font;
+	struct pos_info pos[POS_HISTORY_SIZE];
+	int pos_ptr;
+	int baseline;
+	double scale;
+};
+
+static int console_truetype_set_row(struct udevice *dev, uint row, int clr)
+{
+	struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent);
+	struct console_tt_priv *priv = dev_get_priv(dev);
+	void *line;
+	int pixels = priv->font_size * vid_priv->line_length;
+	int i;
+
+	line = vid_priv->fb + row * priv->font_size * vid_priv->line_length;
+	switch (vid_priv->bpix) {
+#ifdef CONFIG_VIDEO_BPP8
+	case VIDEO_BPP8: {
+		uint8_t *dst = line;
+
+		for (i = 0; i < pixels; i++)
+			*dst++ = clr;
+		break;
+	}
+#endif
+#ifdef CONFIG_VIDEO_BPP16
+	case VIDEO_BPP16: {
+		uint16_t *dst = line;
+
+		for (i = 0; i < pixels; i++)
+			*dst++ = clr;
+		break;
+	}
+#endif
+#ifdef CONFIG_VIDEO_BPP32
+	case VIDEO_BPP32: {
+		uint32_t *dst = line;
+
+		for (i = 0; i < pixels; i++)
+			*dst++ = clr;
+		break;
+	}
+#endif
+	default:
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+static int console_truetype_move_rows(struct udevice *dev, uint rowdst,
+				     uint rowsrc, uint count)
+{
+	struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent);
+	struct console_tt_priv *priv = dev_get_priv(dev);
+	void *dst;
+	void *src;
+	int i, diff;
+
+	dst = vid_priv->fb + rowdst * priv->font_size * vid_priv->line_length;
+	src = vid_priv->fb + rowsrc * priv->font_size * vid_priv->line_length;
+	memmove(dst, src, priv->font_size * vid_priv->line_length * count);
+
+	/* Scroll up our position history */
+	diff = (rowsrc - rowdst) * priv->font_size;
+	for (i = 0; i < priv->pos_ptr; i++)
+		priv->pos[i].ypos -= diff;
+
+	return 0;
+}
+
+static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y,
+				    char ch)
+{
+	struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev);
+	struct udevice *vid = dev->parent;
+	struct video_priv *vid_priv = dev_get_uclass_priv(vid);
+	struct console_tt_priv *priv = dev_get_priv(dev);
+	stbtt_fontinfo *font = &priv->font;
+	int width, height, xoff, yoff;
+	double xpos, x_shift;
+	int lsb;
+	int width_frac, linenum;
+	struct pos_info *pos;
+	u8 *bits, *data;
+	int advance;
+	void *line;
+	int row;
+
+	/* First get some basic metrics about this character */
+	stbtt_GetCodepointHMetrics(font, ch, &advance, &lsb);
+
+	/*
+	 * First out our current X position in fractional pixels. If we wrote
+	 * a character previously, using kerning to fine-tune the position of
+	 * this character */
+	xpos = frac(VID_TO_PIXEL((double)x));
+	if (vc_priv->last_ch) {
+		xpos += priv->scale * stbtt_GetCodepointKernAdvance(font,
+							vc_priv->last_ch, ch);
+	}
+
+	/*
+	 * Figure out where the cursor will move to after this character, and
+	 * abort if we are out of space on this line. Also calculate the
+	 * effective width of this character, which will be our return value:
+	 * it dictates how much the cursor will move forward on the line.
+	 */
+	x_shift = xpos - (double)tt_floor(xpos);
+	xpos += advance * priv->scale;
+	width_frac = (int)VID_TO_POS(xpos);
+	if (x + width_frac >= vc_priv->xsize_frac)
+		return -EAGAIN;
+
+	/* Write the current cursor position into history */
+	if (priv->pos_ptr < POS_HISTORY_SIZE) {
+		pos = &priv->pos[priv->pos_ptr];
+		pos->xpos_frac = vc_priv->xcur_frac;
+		pos->ypos = vc_priv->ycur;
+		priv->pos_ptr++;
+	}
+
+	/*
+	 * Figure out how much past the start of a pixel we are, and pass this
+	 * information into the render, which will return a 8-bit-per-pixel
+	 * image of the character. For empty characters, like ' ', data will
+	 * return NULL;
+	 */
+	data = stbtt_GetCodepointBitmapSubpixel(font, priv->scale, priv->scale,
+						x_shift, 0, ch, &width, &height,
+						&xoff, &yoff);
+	if (!data)
+		return width_frac;
+
+	/* Figure out where to write the character in the frame buffer */
+	bits = data;
+	line = vid_priv->fb + y * vid_priv->line_length +
+		VID_TO_PIXEL(x) * VNBYTES(vid_priv->bpix);
+	linenum = priv->baseline + yoff;
+	if (linenum > 0)
+		line += linenum * vid_priv->line_length;
+
+	/*
+	 * Write a row at a time, converting the 8bpp image into the colour
+	 * depth of the display. We only expect white-on-black or the reverse
+	 * so the code only handles this simple case.
+	 */
+	for (row = 0; row < height; row++) {
+		switch (vid_priv->bpix) {
+#ifdef CONFIG_VIDEO_BPP16
+		case VIDEO_BPP16: {
+			uint16_t *dst = (uint16_t *)line + xoff;
+			int i;
+
+			for (i = 0; i < width; i++) {
+				int val = *bits;
+				int out;
+
+				if (vid_priv->colour_bg)
+					val = 255 - val;
+				out = val >> 3 |
+					(val >> 2) << 5 |
+					(val >> 3) << 11;
+				if (vid_priv->colour_fg)
+					*dst++ |= out;
+				else
+					*dst++ &= out;
+				bits++;
+			}
+			break;
+		}
+#endif
+		default:
+			return -ENOSYS;
+		}
+
+		line += vid_priv->line_length;
+	}
+	free(data);
+
+	return width_frac;
+}
+
+/**
+ * console_truetype_erase() - Erase a character
+ *
+ * This is used for backspace. We erase a square of the display within the
+ * given bounds.
+ *
+ * @dev:	Device to update
+ * @xstart:	X start position in pixels from the left
+ * @ystart:	Y start position in pixels from the top
+ * @xend:	X end position in pixels from the left
+ * @yend:	Y end position  in pixels from the top
+ * @clr:	Value to write
+ * @return 0 if OK, -ENOSYS if the display depth is not supported
+ */
+static int console_truetype_erase(struct udevice *dev, int xstart, int ystart,
+				  int xend, int yend, int clr)
+{
+	struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent);
+	void *line;
+	int pixels = xend - xstart;
+	int row, i;
+
+	line = vid_priv->fb + ystart * vid_priv->line_length;
+	line += xstart * VNBYTES(vid_priv->bpix);
+	for (row = ystart; row < yend; row++) {
+		switch (vid_priv->bpix) {
+#ifdef CONFIG_VIDEO_BPP8
+		case VIDEO_BPP8: {
+			uint8_t *dst = line;
+
+			for (i = 0; i < pixels; i++)
+				*dst++ = clr;
+			break;
+		}
+#endif
+#ifdef CONFIG_VIDEO_BPP16
+		case VIDEO_BPP16: {
+			uint16_t *dst = line;
+
+			for (i = 0; i < pixels; i++)
+				*dst++ = clr;
+			break;
+		}
+#endif
+#ifdef CONFIG_VIDEO_BPP32
+		case VIDEO_BPP32: {
+			uint32_t *dst = line;
+
+			for (i = 0; i < pixels; i++)
+				*dst++ = clr;
+			break;
+		}
+#endif
+		default:
+			return -ENOSYS;
+		}
+		line += vid_priv->line_length;
+	}
+
+	return 0;
+}
+
+/**
+ * console_truetype_backspace() - Handle a backspace operation
+ *
+ * This clears the previous character so that the console looks as if it had
+ * not been entered.
+ *
+ * @dev:	Device to update
+ * @return 0 if OK, -ENOSYS if not supported
+ */
+static int console_truetype_backspace(struct udevice *dev)
+{
+	struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev);
+	struct console_tt_priv *priv = dev_get_priv(dev);
+	struct udevice *vid_dev = dev->parent;
+	struct video_priv *vid_priv = dev_get_uclass_priv(vid_dev);
+	struct pos_info *pos;
+	int xend;
+
+	/*
+	 * This indicates a very strange error higher in the stack. The caller
+	 * has sent out n character and n + 1 backspaces.
+	 */
+	if (!priv->pos_ptr)
+		return -ENOSYS;
+
+	/* Pop the last cursor position off the stack */
+	pos = &priv->pos[--priv->pos_ptr];
+
+	/*
+	 * Figure out the end position for clearing. Normlly it is the current
+	 * cursor position, but if we are clearing a character on the previous
+	 * line, we clear from the end of the line.
+	 */
+	if (pos->ypos == vc_priv->ycur)
+		xend = VID_TO_PIXEL(vc_priv->xcur_frac);
+	else
+		xend = vid_priv->xsize;
+
+	console_truetype_erase(dev, VID_TO_PIXEL(pos->xpos_frac), pos->ypos,
+			       xend, pos->ypos + vc_priv->y_charsize,
+			       vid_priv->colour_bg);
+
+	/* Move the cursor back to where it was when we pushed this record */
+	vc_priv->xcur_frac = pos->xpos_frac;
+	vc_priv->ycur = pos->ypos;
+
+	return 0;
+}
+
+static int console_truetype_entry_start(struct udevice *dev)
+{
+	struct console_tt_priv *priv = dev_get_priv(dev);
+
+	/* A new input line has start, so clear our history */
+	priv->pos_ptr = 0;
+
+	return 0;
+}
+
+/*
+ * Provides a list of fonts which can be obtained at run-time in U-Boot. These
+ * are compiled in by the Makefile.
+ *
+ * At present there is no mechanism to select a particular font - the first
+ * one found is the one that is used. But the build system and the code here
+ * supports multiple fonts, which may be useful for certain firmware screens.
+ */
+struct font_info {
+	char *name;
+	u8 *begin;
+	u8 *end;
+};
+
+#define FONT_DECL(_name) \
+	extern u8 __ttf_ ## _name ## _begin[]; \
+	extern u8 __ttf_ ## _name ## _end[];
+
+#define FONT_ENTRY(_name)		{ \
+	.name = #_name, \
+	.begin = __ttf_ ## _name ## _begin, \
+	.end = __ttf_ ## _name ## _end, \
+	}
+
+static struct font_info font_table[] = {
+	{} /* sentinel */
+};
+
+#define FONT_BEGIN(name)	__ttf_ ## name ## _begin
+#define FONT_END(name)		__ttf_ ## name ## _end
+#define FONT_IS_VALID(name)	(abs(FONT_END(name) - FONT_BEGIN) > 4)
+
+/**
+ * console_truetype_find_font() - Find a suitable font
+ *
+ * This searched for the first available font.
+ *
+ * @return pointer to the font, or NULL if none is found
+ */
+static u8 *console_truetype_find_font(void)
+{
+	struct font_info *tab;
+
+	for (tab = font_table; tab->begin; tab++) {
+		if (abs(tab->begin - tab->end) > 4) {
+			debug("%s: Font '%s', at %p, size %lx\n", __func__,
+			      tab->name, tab->begin,
+			      (ulong)(tab->end - tab->begin));
+			return tab->begin;
+		}
+	}
+
+	return NULL;
+}
+
+static int console_truetype_probe(struct udevice *dev)
+{
+	struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev);
+	struct console_tt_priv *priv = dev_get_priv(dev);
+	struct udevice *vid_dev = dev->parent;
+	struct video_priv *vid_priv = dev_get_uclass_priv(vid_dev);
+	stbtt_fontinfo *font = &priv->font;
+	int ascent;
+
+	debug("%s: start\n", __func__);
+	if (vid_priv->font_size)
+		priv->font_size = vid_priv->font_size;
+	else
+		priv->font_size = CONFIG_CONSOLE_TRUETYPE_SIZE;
+	priv->font_data = console_truetype_find_font();
+	if (!priv->font_data) {
+		debug("%s: Could not find any fonts\n", __func__);
+		return -EBFONT;
+	}
+
+	vc_priv->x_charsize = priv->font_size;
+	vc_priv->y_charsize = priv->font_size;
+	vc_priv->xstart_frac = VID_TO_POS(2);
+	vc_priv->cols = vid_priv->xsize / priv->font_size;
+	vc_priv->rows = vid_priv->ysize / priv->font_size;
+	vc_priv->tab_width_frac = VID_TO_POS(priv->font_size) * 8 / 2;
+
+	if (!stbtt_InitFont(font, priv->font_data, 0)) {
+		debug("%s: Font init failed\n", __func__);
+		return -EPERM;
+	}
+
+	/* Pre-calculate some things we will need regularly */
+	priv->scale = stbtt_ScaleForPixelHeight(font, priv->font_size);
+	stbtt_GetFontVMetrics(font, &ascent, 0, 0);
+	priv->baseline = (int)(ascent * priv->scale);
+	debug("%s: ready\n", __func__);
+
+	return 0;
+}
+
+struct vidconsole_ops console_truetype_ops = {
+	.putc_xy	= console_truetype_putc_xy,
+	.move_rows	= console_truetype_move_rows,
+	.set_row	= console_truetype_set_row,
+	.backspace	= console_truetype_backspace,
+	.entry_start	= console_truetype_entry_start,
+};
+
+U_BOOT_DRIVER(vidconsole_truetype) = {
+	.name	= "vidconsole_tt",
+	.id	= UCLASS_VIDEO_CONSOLE,
+	.ops	= &console_truetype_ops,
+	.probe	= console_truetype_probe,
+	.priv_auto_alloc_size	= sizeof(struct console_tt_priv),
+};
diff --git a/drivers/video/fonts/Kconfig b/drivers/video/fonts/Kconfig
new file mode 100644
index 0000000..ad16ce6
--- /dev/null
+++ b/drivers/video/fonts/Kconfig
@@ -0,0 +1,7 @@
+#
+# Video fonts
+#
+
+menu "TrueType Fonts"
+
+endmenu
diff --git a/drivers/video/fonts/Makefile b/drivers/video/fonts/Makefile
new file mode 100644
index 0000000..6ab4647
--- /dev/null
+++ b/drivers/video/fonts/Makefile
@@ -0,0 +1,6 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index 24d537e..2189fce 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -201,11 +201,18 @@
 	 * it might be useful to support only bitmap drawing on the device
 	 * for boards that don't need to display text.
 	 */
-	snprintf(name, sizeof(name), "%s.vidconsole", dev->name);
+	if (IS_ENABLED(CONFIG_CONSOLE_TRUETYPE)) {
+		snprintf(name, sizeof(name), "%s.vidconsole_tt", dev->name);
+		strcpy(drv, "vidconsole_tt");
+	} else {
+		snprintf(name, sizeof(name), "%s.vidconsole%d", dev->name,
+			 priv->rot);
+		snprintf(drv, sizeof(drv), "vidconsole%d", priv->rot);
+	}
+
 	str = strdup(name);
 	if (!str)
 		return -ENOMEM;
-	snprintf(drv, sizeof(drv), "vidconsole%d", priv->rot);
 	ret = device_bind_driver(dev, drv, str, &cons);
 	if (ret) {
 		debug("%s: Cannot bind console driver\n", __func__);