Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
diff --git a/MAINTAINERS b/MAINTAINERS
index 638b2fd..f8afd7d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -578,19 +578,14 @@
ARM SAMSUNG EXYNOS850 SOC
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
-F: arch/arm/dts/exynos850-pinctrl.dtsi
-F: arch/arm/dts/exynos850.dtsi
-F: doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml
F: drivers/clk/exynos/clk-exynos850.c
F: drivers/pinctrl/exynos/pinctrl-exynos850.c
-F: include/dt-bindings/clock/exynos850.h
ARM SAMSUNG SOC DRIVERS
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
-F: doc/device-tree-bindings/soc/samsung/*
+F: doc/device-tree-bindings/soc/samsung/exynos-pmu.yaml
F: drivers/soc/samsung/*
-F: include/dt-bindings/soc/samsung,*.h
ARM SANCLOUD
M: Paul Barker <paul.barker@sancloud.com>
diff --git a/Makefile b/Makefile
index 79b28c2..f8206b2 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2024
PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME =
# *DOCUMENTATION*
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f77a80b..8fb6a8a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -31,7 +31,6 @@
dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb
dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb
-dtb-$(CONFIG_TARGET_E850_96) += exynos850-e850-96.dtb
dtb-$(CONFIG_ARCH_APPLE) += \
t8103-j274.dtb \
@@ -1027,9 +1026,6 @@
dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
-dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
- omap3-igep0020.dtb
-
dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
omap4-panda.dtb \
omap4-panda-es.dtb
diff --git a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
index 7ad11e9..6d7148f 100644
--- a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
+++ b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
@@ -3,35 +3,7 @@
* Copyright (c) 2023 Linaro Ltd.
*/
-&cmu_top {
- bootph-all;
-};
-
-&cmu_peri {
- bootph-all;
-};
-
-&oscclk {
- bootph-all;
-};
-
-&pinctrl_alive {
- bootph-all;
-};
-
&pmu_system_controller {
bootph-all;
samsung,uart-debug-1;
};
-
-&serial_0 {
- bootph-all;
-};
-
-&uart1_pins {
- bootph-all;
-};
-
-&usi_uart {
- bootph-all;
-};
diff --git a/arch/arm/dts/exynos850-e850-96.dts b/arch/arm/dts/exynos850-e850-96.dts
deleted file mode 100644
index f074df8..0000000
--- a/arch/arm/dts/exynos850-e850-96.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WinLink E850-96 board device tree source
- *
- * Copyright (C) 2018 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Device tree source file for WinLink's E850-96 board which is based on
- * Samsung Exynos850 SoC.
- */
-
-/dts-v1/;
-
-#include "exynos850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "WinLink E850-96 board";
- compatible = "winlink,e850-96", "samsung,exynos850";
-
- aliases {
- mmc0 = &mmc_0;
- serial0 = &serial_0;
- };
-
- chosen {
- stdout-path = &serial_0;
- };
-
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- label = "micro-USB";
- type = "micro";
- vbus-supply = <®_usb_host_vbus>;
- id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <µ_usb_det_pins>;
-
- port {
- usb_dr_connector: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
- };
-
- /*
- * RAM: 4 GiB (eMCP):
- * - 2 GiB at 0x80000000
- * - 2 GiB at 0x880000000
- *
- * 0xbab00000..0xbfffffff: secure memory (85 MiB).
- */
- memory@80000000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x3ab00000>,
- <0x0 0xc0000000 0x40000000>,
- <0x8 0x80000000 0x80000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
-
- volume-down-key {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
- };
-
- volume-up-key {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* HEART_BEAT_LED */
- user_led1: led-1 {
- label = "yellow:user1";
- gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- };
-
- /* eMMC_LED */
- user_led2: led-2 {
- label = "yellow:user2";
- gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- linux,default-trigger = "mmc0";
- };
-
- /* SD_LED */
- user_led3: led-3 {
- label = "white:user3";
- gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_SD;
- linux,default-trigger = "mmc2";
- };
-
- /* WIFI_LED */
- wlan_active_led: led-4 {
- label = "yellow:wlan";
- gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_YELLOW>;
- function = LED_FUNCTION_WLAN;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- /* BLUETOOTH_LED */
- bt_active_led: led-5 {
- label = "blue:bt";
- gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_BLUETOOTH;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
- };
-
- /* TODO: Remove this once PMIC is implemented */
- reg_dummy: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "dummy_reg";
- };
-
- reg_usb_host_vbus: regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpa3 5 GPIO_ACTIVE_LOW>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges;
-
- ramoops@f0000000 {
- compatible = "ramoops";
- reg = <0x0 0xf0000000 0x200000>;
- record-size = <0x20000>;
- console-size = <0x20000>;
- ftrace-size = <0x100000>;
- pmsg-size = <0x20000>;
- };
- };
-
- /*
- * RTC clock (XrtcXTI); external, must be 32.768 kHz.
- *
- * TODO: Remove this once RTC clock is implemented properly as part of
- * PMIC driver.
- */
- rtcclk: clock-rtcclk {
- compatible = "fixed-clock";
- clock-output-names = "rtcclk";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-};
-
-&cmu_hsi {
- clocks = <&oscclk>, <&rtcclk>,
- <&cmu_top CLK_DOUT_HSI_BUS>,
- <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
- <&cmu_top CLK_DOUT_HSI_USB20DRD>;
- clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
- "dout_hsi_mmc_card", "dout_hsi_usb20drd";
-};
-
-&mmc_0 {
- status = "okay";
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- mmc-hs400-enhanced-strobe;
- card-detect-delay = <200>;
- clock-frequency = <800000000>;
- bus-width = <8>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <2 4>;
- samsung,dw-mshc-hs400-timing = <0 2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
- &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
-};
-
-&oscclk {
- clock-frequency = <26000000>;
-};
-
-&pinctrl_alive {
- key_voldown_pins: key-voldown-pins {
- samsung,pins = "gpa1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- key_volup_pins: key-volup-pins {
- samsung,pins = "gpa0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- micro_usb_det_pins: micro-usb-det-pins {
- samsung,pins = "gpa0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
-
-&rtc {
- status = "okay";
- clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
- clock-names = "rtc", "rtc_src";
-};
-
-&serial_0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&usbdrd {
- status = "okay";
- vdd10-supply = <®_dummy>;
- vdd33-supply = <®_dummy>;
-};
-
-&usbdrd_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
- role-switch-default-mode = "host";
-
- port {
- usb1_drd_sw: endpoint {
- remote-endpoint = <&usb_dr_connector>;
- };
- };
-};
-
-&usbdrd_phy {
- status = "okay";
-};
-
-&usi_uart {
- samsung,clkreq-on; /* needed for UART mode */
- status = "okay";
-};
-
-&watchdog_cl0 {
- status = "okay";
-};
-
-&watchdog_cl1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/exynos850-pinctrl.dtsi b/arch/arm/dts/exynos850-pinctrl.dtsi
deleted file mode 100644
index 424bc80..0000000
--- a/arch/arm/dts/exynos850-pinctrl.dtsi
+++ /dev/null
@@ -1,663 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
- *
- * Copyright (C) 2017 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
- * tree nodes in this file.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "exynos-pinctrl.h"
-
-&pinctrl_alive {
- gpa0: gpa0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa1: gpa1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa2: gpa2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa3: gpa3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpa4: gpa4-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpq0: gpq0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- /* I2C5 (also called CAM_PMIC_I2C in TRM) */
- i2c5_pins: i2c5-pins {
- samsung,pins = "gpa3-5", "gpa3-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* I2C6 (also called MOTOR_I2C in TRM) */
- i2c6_pins: i2c6-pins {
- samsung,pins = "gpa3-7", "gpa4-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: UART_DEBUG_0 pins */
- uart0_pins: uart0-pins {
- samsung,pins = "gpq0-0", "gpq0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI: UART_DEBUG_1 pins */
- uart1_pins: uart1-pins {
- samsung,pins = "gpa3-7", "gpa4-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
-
-&pinctrl_cmgp {
- gpm0: gpm0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm1: gpm1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm2: gpm2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm3: gpm3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm4: gpm4-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm5: gpm5-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm6: gpm6-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- gpm7: gpm7-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* USI_CMGP0: HSI2C function */
- hsi2c3_pins: hsi2c3-pins {
- samsung,pins = "gpm0-0", "gpm1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
- uart1_single_pins: uart1-single-pins {
- samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
- uart1_dual_pins: uart1-dual-pins {
- samsung,pins = "gpm0-0", "gpm1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP0: SPI function */
- spi1_pins: spi1-pins {
- samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP1: HSI2C function */
- hsi2c4_pins: hsi2c4-pins {
- samsung,pins = "gpm4-0", "gpm5-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
- uart2_single_pins: uart2-single-pins {
- samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
- uart2_dual_pins: uart2-dual-pins {
- samsung,pins = "gpm4-0", "gpm5-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-
- /* USI_CMGP1: SPI function */
- spi2_pins: spi2-pins {
- samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-};
-
-&pinctrl_aud {
- gpb0: gpb0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb1: gpb1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- aud_codec_mclk_pins: aud-codec-mclk-pins {
- samsung,pins = "gpb0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
- samsung,pins = "gpb0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s0_pins: aud-i2s0-pins {
- samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s0_idle_pins: aud-i2s0-idle-pins {
- samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s1_pins: aud-i2s1-pins {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_i2s1_idle_pins: aud-i2s1-idle-pins {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_fm_pins: aud-fm-pins {
- samsung,pins = "gpb1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-
- aud_fm_idle_pins: aud-fm-idle-pins {
- samsung,pins = "gpb1-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-};
-
-&pinctrl_hsi {
- gpf2: gpf2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sd2_clk_pins: sd2-clk-pins {
- samsung,pins = "gpf2-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_cmd_pins: sd2-cmd-pins {
- samsung,pins = "gpf2-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_bus1_pins: sd2-bus1-pins {
- samsung,pins = "gpf2-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_bus4_pins: sd2-bus4-pins {
- samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
- };
-
- sd2_pdn_pins: sd2-pdn-pins {
- samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
- "gpf2-4", "gpf2-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- };
-};
-
-&pinctrl_core {
- gpf0: gpf0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf1: gpf1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sd0_clk_pins: sd0-clk-pins {
- samsung,pins = "gpf0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_cmd_pins: sd0-cmd-pins {
- samsung,pins = "gpf0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_rdqs_pins: sd0-rdqs-pins {
- samsung,pins = "gpf0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_nreset_pins: sd0-nreset-pins {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus1_pins: sd0-bus1-pins {
- samsung,pins = "gpf1-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus4_pins: sd0-bus4-pins {
- samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-
- sd0_bus8_pins: sd0-bus8-pins {
- samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
- };
-};
-
-&pinctrl_peri {
- gpc0: gpc0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc1: gpc1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg0: gpg0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg1: gpg1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg2: gpg2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg3: gpg3-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpp0: gpp0-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- gpp1: gpp1-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpp2: gpp2-gpio-bank {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- sensor_mclk0_in_pins: sensor-mclk0-in-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk0_out_pins: sensor-mclk0-out-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_in_pins: sensor-mclk1-in-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_out_pins: sensor-mclk1-out-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_in_pins: sensor-mclk2-in-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_out_pins: sensor-mclk2-out-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
- /* USI: HSI2C0 */
- hsi2c0_pins: hsi2c0-pins {
- samsung,pins = "gpc1-0", "gpc1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: HSI2C1 */
- hsi2c1_pins: hsi2c1-pins {
- samsung,pins = "gpc1-2", "gpc1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: HSI2C2 */
- hsi2c2_pins: hsi2c2-pins {
- samsung,pins = "gpc1-4", "gpc1-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- /* USI: SPI */
- spi0_pins: spi0-pins {
- samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c0_pins: i2c0-pins {
- samsung,pins = "gpp0-0", "gpp0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c1_pins: i2c1-pins {
- samsung,pins = "gpp0-2", "gpp0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c2_pins: i2c2-pins {
- samsung,pins = "gpp0-4", "gpp0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c3_pins: i2c3-pins {
- samsung,pins = "gpp1-0", "gpp1-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- i2c4_pins: i2c4-pins {
- samsung,pins = "gpp1-2", "gpp1-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- xclkout_pins: xclkout-pins {
- samsung,pins = "gpq0-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- };
-};
diff --git a/arch/arm/dts/exynos850.dtsi b/arch/arm/dts/exynos850.dtsi
deleted file mode 100644
index 53104e6..0000000
--- a/arch/arm/dts/exynos850.dtsi
+++ /dev/null
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos850 SoC device tree source
- *
- * Copyright (C) 2018 Samsung Electronics Co., Ltd.
- * Copyright (C) 2021 Linaro Ltd.
- *
- * Samsung Exynos850 SoC device nodes are listed in this file.
- * Exynos850 based board files can include this file and provide
- * values for board specific bindings.
- */
-
-#include <dt-bindings/clock/exynos850.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/samsung,exynos-usi.h>
-
-/ {
- /* Also known under engineering name Exynos3830 */
- compatible = "samsung,exynos850";
- #address-cells = <2>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- aliases {
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_cmgp;
- pinctrl2 = &pinctrl_aud;
- pinctrl3 = &pinctrl_hsi;
- pinctrl4 = &pinctrl_core;
- pinctrl5 = &pinctrl_peri;
- };
-
- arm-pmu {
- compatible = "arm,cortex-a55-pmu";
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
- <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
- };
-
- /* Main system clock (XTCXO); external, must be 26 MHz */
- oscclk: clock-oscclk {
- compatible = "fixed-clock";
- clock-output-names = "oscclk";
- #clock-cells = <0>;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
- core1 {
- cpu = <&cpu1>;
- };
- core2 {
- cpu = <&cpu2>;
- };
- core3 {
- cpu = <&cpu3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&cpu4>;
- };
- core1 {
- cpu = <&cpu5>;
- };
- core2 {
- cpu = <&cpu6>;
- };
- core3 {
- cpu = <&cpu7>;
- };
- };
- };
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0>;
- enable-method = "psci";
- };
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x1>;
- enable-method = "psci";
- };
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x2>;
- enable-method = "psci";
- };
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x3>;
- enable-method = "psci";
- };
- cpu4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x100>;
- enable-method = "psci";
- };
- cpu5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x101>;
- enable-method = "psci";
- };
- cpu6: cpu@102 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x102>;
- enable-method = "psci";
- };
- cpu7: cpu@103 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x103>;
- enable-method = "psci";
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- /* Hypervisor Virtual Timer interrupt is not wired to GIC */
- interrupts =
- <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- soc: soc@0 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x20000000>;
-
- chipid@10000000 {
- compatible = "samsung,exynos850-chipid";
- reg = <0x10000000 0x100>;
- };
-
- timer@10040000 {
- compatible = "samsung,exynos850-mct",
- "samsung,exynos4210-mct";
- reg = <0x10040000 0x800>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
- clock-names = "fin_pll", "mct";
- };
-
- gic: interrupt-controller@12a01000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- reg = <0x12a01000 0x1000>,
- <0x12a02000 0x2000>,
- <0x12a04000 0x2000>,
- <0x12a06000 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- pmu_system_controller: system-controller@11860000 {
- compatible = "samsung,exynos850-pmu", "syscon";
- reg = <0x11860000 0x10000>;
-
- reboot: syscon-reboot {
- compatible = "syscon-reboot";
- regmap = <&pmu_system_controller>;
- offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
- mask = <0x2>; /* SWRESET_SYSTEM */
- value = <0x2>; /* reset value */
- };
- };
-
- watchdog_cl0: watchdog@10050000 {
- compatible = "samsung,exynos850-wdt";
- reg = <0x10050000 0x100>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
- clock-names = "watchdog", "watchdog_src";
- samsung,syscon-phandle = <&pmu_system_controller>;
- samsung,cluster-index = <0>;
- status = "disabled";
- };
-
- watchdog_cl1: watchdog@10060000 {
- compatible = "samsung,exynos850-wdt";
- reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
- clock-names = "watchdog", "watchdog_src";
- samsung,syscon-phandle = <&pmu_system_controller>;
- samsung,cluster-index = <1>;
- status = "disabled";
- };
-
- cmu_peri: clock-controller@10030000 {
- compatible = "samsung,exynos850-cmu-peri";
- reg = <0x10030000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
- <&cmu_top CLK_DOUT_PERI_UART>,
- <&cmu_top CLK_DOUT_PERI_IP>;
- clock-names = "oscclk", "dout_peri_bus",
- "dout_peri_uart", "dout_peri_ip";
- };
-
- cmu_g3d: clock-controller@11400000 {
- compatible = "samsung,exynos850-cmu-g3d";
- reg = <0x11400000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
- clock-names = "oscclk", "dout_g3d_switch";
- };
-
- cmu_apm: clock-controller@11800000 {
- compatible = "samsung,exynos850-cmu-apm";
- reg = <0x11800000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
- clock-names = "oscclk", "dout_clkcmu_apm_bus";
- };
-
- cmu_cmgp: clock-controller@11c00000 {
- compatible = "samsung,exynos850-cmu-cmgp";
- reg = <0x11c00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
- clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
- };
-
- cmu_core: clock-controller@12000000 {
- compatible = "samsung,exynos850-cmu-core";
- reg = <0x12000000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
- <&cmu_top CLK_DOUT_CORE_CCI>,
- <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
- <&cmu_top CLK_DOUT_CORE_SSS>;
- clock-names = "oscclk", "dout_core_bus",
- "dout_core_cci", "dout_core_mmc_embd",
- "dout_core_sss";
- };
-
- cmu_top: clock-controller@120e0000 {
- compatible = "samsung,exynos850-cmu-top";
- reg = <0x120e0000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>;
- clock-names = "oscclk";
- };
-
- cmu_mfcmscl: clock-controller@12c00000 {
- compatible = "samsung,exynos850-cmu-mfcmscl";
- reg = <0x12c00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_MFCMSCL_MFC>,
- <&cmu_top CLK_DOUT_MFCMSCL_M2M>,
- <&cmu_top CLK_DOUT_MFCMSCL_MCSC>,
- <&cmu_top CLK_DOUT_MFCMSCL_JPEG>;
- clock-names = "oscclk", "dout_mfcmscl_mfc",
- "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc",
- "dout_mfcmscl_jpeg";
- };
-
- cmu_dpu: clock-controller@13000000 {
- compatible = "samsung,exynos850-cmu-dpu";
- reg = <0x13000000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
- clock-names = "oscclk", "dout_dpu";
- };
-
- cmu_hsi: clock-controller@13400000 {
- compatible = "samsung,exynos850-cmu-hsi";
- reg = <0x13400000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_HSI_BUS>,
- <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
- <&cmu_top CLK_DOUT_HSI_USB20DRD>;
- clock-names = "oscclk", "dout_hsi_bus",
- "dout_hsi_mmc_card", "dout_hsi_usb20drd";
- };
-
- cmu_is: clock-controller@14500000 {
- compatible = "samsung,exynos850-cmu-is";
- reg = <0x14500000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>,
- <&cmu_top CLK_DOUT_IS_BUS>,
- <&cmu_top CLK_DOUT_IS_ITP>,
- <&cmu_top CLK_DOUT_IS_VRA>,
- <&cmu_top CLK_DOUT_IS_GDC>;
- clock-names = "oscclk", "dout_is_bus", "dout_is_itp",
- "dout_is_vra", "dout_is_gdc";
- };
-
- cmu_aud: clock-controller@14a00000 {
- compatible = "samsung,exynos850-cmu-aud";
- reg = <0x14a00000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>;
- clock-names = "oscclk", "dout_aud";
- };
-
- pinctrl_alive: pinctrl@11850000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x11850000 0x1000>;
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
- };
- };
-
- pinctrl_cmgp: pinctrl@11c30000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x11c30000 0x1000>;
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
- };
- };
-
- pinctrl_core: pinctrl@12070000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x12070000 0x1000>;
- interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_hsi: pinctrl@13430000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x13430000 0x1000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_peri: pinctrl@139b0000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x139b0000 0x1000>;
- interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_aud: pinctrl@14a60000 {
- compatible = "samsung,exynos850-pinctrl";
- reg = <0x14a60000 0x1000>;
- };
-
- rtc: rtc@11a30000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x11a30000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
- clock-names = "rtc";
- status = "disabled";
- };
-
- mmc_0: mmc@12100000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
- reg = <0x12100000 0x2000>;
- interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
- <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x40>;
- status = "disabled";
- };
-
- i2c_0: i2c@13830000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13830000 0x100>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_1: i2c@13840000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13840000 0x100>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_2: i2c@13850000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13850000 0x100>;
- interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_3: i2c@13860000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13860000 0x100>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- i2c_4: i2c@13870000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13870000 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- /* I2C_5 (also called CAM_PMIC_I2C in TRM) */
- i2c_5: i2c@13880000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13880000 0x100>;
- interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- /* I2C_6 (also called MOTOR_I2C in TRM) */
- i2c_6: i2c@13890000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x13890000 0x100>;
- interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
- clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
- clock-names = "i2c";
- status = "disabled";
- };
-
- sysmmu_mfcmscl: sysmmu@12c50000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12c50000 0x9000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_dpu: sysmmu@130c0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x130c0000 0x9000>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_is0: sysmmu@14550000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14550000 0x9000>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_is1: sysmmu@14570000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14570000 0x9000>;
- interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>;
- #iommu-cells = <0>;
- };
-
- sysmmu_aud: sysmmu@14850000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14850000 0x9000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "sysmmu";
- clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>;
- #iommu-cells = <0>;
- };
-
- sysreg_peri: syscon@10020000 {
- compatible = "samsung,exynos850-peri-sysreg",
- "samsung,exynos850-sysreg", "syscon";
- reg = <0x10020000 0x10000>;
- clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
- };
-
- sysreg_cmgp: syscon@11c20000 {
- compatible = "samsung,exynos850-cmgp-sysreg",
- "samsung,exynos850-sysreg", "syscon";
- reg = <0x11c20000 0x10000>;
- clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
- };
-
- usbdrd: usb@13600000 {
- compatible = "samsung,exynos850-dwusb3";
- ranges = <0x0 0x13600000 0x10000>;
- clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>,
- <&cmu_hsi CLK_GOUT_USB_REF_CLK>;
- clock-names = "bus_early", "ref";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
-
- usbdrd_dwc3: usb@0 {
- compatible = "snps,dwc3";
- reg = <0x0 0x10000>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usbdrd_phy 0>;
- phy-names = "usb2-phy";
- };
- };
-
- usbdrd_phy: phy@135d0000 {
- compatible = "samsung,exynos850-usbdrd-phy";
- reg = <0x135d0000 0x100>;
- clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>,
- <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- status = "disabled";
- };
-
- usi_uart: usi@138200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138200c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1010>;
- samsung,mode = <USI_V2_UART>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
- <&cmu_peri CLK_GOUT_UART_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- serial_0: serial@13820000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
- <&cmu_peri CLK_GOUT_UART_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
-
- usi_hsi2c_0: usi@138a00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138a00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1020>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_0: i2c@138a0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138a0000 0xc0>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c0_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_hsi2c_1: usi@138b00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138b00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1030>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_1: i2c@138b0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138b0000 0xc0>;
- interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c1_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_hsi2c_2: usi@138c00c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138c00c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1040>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
- <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_2: i2c@138c0000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x138c0000 0xc0>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c2_pins>;
- clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
- <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
-
- usi_spi_0: usi@139400c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x139400c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1050>;
- samsung,mode = <USI_V2_SPI>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
- <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
- };
-
- usi_cmgp0: usi@11d000c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x11d000c0 0x20>;
- samsung,sysreg = <&sysreg_cmgp 0x2000>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_3: i2c@11d00000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x11d00000 0xc0>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c3_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
-
- serial_1: serial@11d00000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x11d00000 0xc0>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_single_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
-
- usi_cmgp1: usi@11d200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x11d200c0 0x20>;
- samsung,sysreg = <&sysreg_cmgp 0x2010>;
- samsung,mode = <USI_V2_I2C>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
- clock-names = "pclk", "ipclk";
- status = "disabled";
-
- hsi2c_4: i2c@11d20000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x11d20000 0xc0>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c4_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
-
- serial_2: serial@11d20000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x11d20000 0xc0>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_single_pins>;
- clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
- <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
- };
-};
-
-#include "exynos850-pinctrl.dtsi"
diff --git a/arch/arm/dts/omap3-igep.dtsi b/arch/arm/dts/omap3-igep.dtsi
deleted file mode 100644
index 2192026..0000000
--- a/arch/arm/dts/omap3-igep.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-
- chosen {
- stdout-path = &uart3;
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "igep2";
- ti,mcbsp = <&mcbsp2>;
- };
-
- vdd33: regulator-vdd33 {
- compatible = "regulator-fixed";
- regulator-name = "vdd33";
- regulator-always-on;
- };
-
-};
-
-&omap3_pmx_core {
- gpmc_pins: pinmux_gpmc_pins {
- pinctrl-single,pins = <
- /* OneNAND seems to require PIN_INPUT on clock. */
- OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
- >;
- };
-
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
- OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
- OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
- OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
-
- mmc2_pins: pinmux_mmc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
- OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
- OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
- >;
- };
-};
-
-&gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&gpmc_pins>;
-
- nand@0,0 {
- compatible = "ti,omap2-nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
- interrupt-parent = <&gpmc>;
- interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
- <1 IRQ_TYPE_NONE>; /* termcount */
- linux,mtd-name = "micron,mt29c4g96maz";
- nand-bus-width = <16>;
- gpmc,device-width = <2>;
- ti,nand-ecc-opt = "bch8";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- status = "okay";
- };
-
- onenand@0,0 {
- compatible = "ti,omap2-onenand";
- reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
-
- gpmc,sync-read;
- gpmc,sync-write;
- gpmc,burst-length = <16>;
- gpmc,burst-wrap;
- gpmc,burst-read;
- gpmc,burst-write;
- gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
- gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <96>;
- gpmc,cs-wr-off-ns = <96>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <18>;
- gpmc,oe-off-ns = <96>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <96>;
- gpmc,rd-cycle-ns = <114>;
- gpmc,wr-cycle-ns = <114>;
- gpmc,access-ns = <90>;
- gpmc,page-burst-access-ns = <12>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <6>;
- gpmc,wr-data-mux-bus-ns = <30>;
- gpmc,wr-access-ns = <90>;
- gpmc,sync-clk-ps = <12000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- status = "disabled";
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
- };
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp2_pins>;
- status = "okay";
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <4>;
- cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
- ti,use-leds;
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
diff --git a/arch/arm/dts/omap3-igep0020-common.dtsi b/arch/arm/dts/omap3-igep0020-common.dtsi
deleted file mode 100644
index 73d8f47..0000000
--- a/arch/arm/dts/omap3-igep0020-common.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common Device Tree Source for IGEPv2
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
-
- boot {
- label = "omap3:green:boot";
- gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user1 {
- label = "omap3:red:user1";
- gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user2 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- /* HS USB Port 1 Power */
- hsusb1_power: hsusb1_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb1_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 1 */
- hsusb1_phy: hsusb1_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
- vcc-supply = <&hsusb1_power>;
- #phy-cells = <0>;
- };
-
- tfp410: encoder {
- compatible = "ti,tfp410";
- powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tfp410_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tfp410_out: endpoint {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
- };
-};
-
-&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &tfp410_pins
- &dss_dpi_pins
- >;
-
- tfp410_pins: pinmux_tfp410_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
- >;
- };
-
- dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- >;
- };
-
- smsc9221_pins: pinmux_smsc9221_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusbb1_pins
- >;
-
- hsusbb1_pins: pinmux_hsusbb1_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
- OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
- >;
- };
-
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
- >;
- };
-
- mmc1_wp_pins: pinmux_mmc1_cd_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
- >;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
- <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
-
- ethernet@gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc9221_pins>;
- reg = <5 0 0xff>;
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
-&usbhshost {
- port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
- /* Needed for DSS */
- regulator-name = "vdds_dsi";
-};
-
-&dss {
- status = "okay";
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
-};
-
-&mmc1 {
- pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
- wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
-};
diff --git a/arch/arm/dts/omap3-igep0020-u-boot.dtsi b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
index 41beaf0..2c03701 100644
--- a/arch/arm/dts/omap3-igep0020-u-boot.dtsi
+++ b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
@@ -5,20 +5,10 @@
* (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
*/
+#include "omap3-u-boot.dtsi"
+
/ {
chosen {
stdout-path = &uart3;
};
};
-
-&uart1 {
- reg-shift = <2>;
-};
-
-&uart2 {
- reg-shift = <2>;
-};
-
-&uart3 {
- reg-shift = <2>;
-};
diff --git a/arch/arm/dts/omap3-igep0020.dts b/arch/arm/dts/omap3-igep0020.dts
deleted file mode 100644
index cf3ac84..0000000
--- a/arch/arm/dts/omap3-igep0020.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0020-common.dtsi"
-
-/ {
- model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
- compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
-
- vmmcsdio_fixed: fixedregulator-mmcsdio {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsdio_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- mmc2_pwrseq: mmc2_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
- <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
- };
-};
-
-&omap3_pmx_core {
- lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
- OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
- OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
- >;
- };
-};
-
-/* On board Wifi module */
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&vmmcsdio_fixed>;
- mmc-pwrseq = <&mmc2_pwrseq>;
- bus-width = <4>;
- non-removable;
-};
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
deleted file mode 100644
index 4a3d503..0000000
--- a/arch/arm/dts/salvator-common.dtsi
+++ /dev/null
@@ -1,1104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for common parts of Salvator-X board variants
- *
- * Copyright (C) 2015-2016 Renesas Electronics Corp.
- */
-
-/*
- * SSI-AK4613
- *
- * This command is required when Playback/Capture
- *
- * amixer set "DVC Out" 100%
- * amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- * amixer set "DVC Out Mute" on
- * amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
- * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- * amixer set "DVC Out Ramp" on
- * aplay xxx.wav &
- * amixer set "DVC Out" 80% // Volume Down
- * amixer set "DVC Out" 100% // Volume Up
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- serial0 = &scif2;
- serial1 = &hscif1;
- ethernet0 = &avb;
- mmc0 = &sdhi2;
- mmc1 = &sdhi0;
- mmc2 = &sdhi3;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- audio_clkout: audio-clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12288000>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 50000>;
-
- brightness-levels = <256 128 64 16 8 4 0>;
- default-brightness-level = <6>;
-
- power-supply = <®_12v>;
- enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- };
-
- cvbs-in {
- compatible = "composite-video-connector";
- label = "CVBS IN";
-
- port {
- cvbs_con: endpoint {
- remote-endpoint = <&adv7482_ain7>;
- };
- };
- };
-
- hdmi-in {
- compatible = "hdmi-connector";
- label = "HDMI IN";
- type = "a";
-
- port {
- hdmi_in_con: endpoint {
- remote-endpoint = <&adv7482_hdmi>;
- };
- };
- };
-
- hdmi0-out {
- compatible = "hdmi-connector";
- label = "HDMI0 OUT";
- type = "a";
-
- port {
- hdmi0_con: endpoint {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
- };
- };
- };
-
- hdmi1-out {
- compatible = "hdmi-connector";
- label = "HDMI1 OUT";
- type = "a";
-
- port {
- hdmi1_con: endpoint {
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&keys_pins>;
- pinctrl-names = "default";
-
- key-1 {
- gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "SW4-1";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-2 {
- gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "SW4-2";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-3 {
- gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "SW4-3";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-4 {
- gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_4>;
- label = "SW4-4";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-a {
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_A>;
- label = "TSW0";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-b {
- gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_B>;
- label = "TSW1";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-c {
- gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_C>;
- label = "TSW2";
- wakeup-source;
- debounce-interval = <20>;
- };
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_12v: regulator-12v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sound_card: sound {
- compatible = "audio-graph-card";
-
- label = "rcar-sound";
-
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
-#ifdef SOC_HAS_HDMI1
- &rsnd_port2 /* HDMI1 */
-#endif
- >;
- };
-
- vbus0_usb2: regulator-vbus0-usb2 {
- compatible = "regulator-fixed";
-
- regulator-name = "USB20_VBUS0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vcc_sdhi3: regulator-vcc-sdhi3 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI3 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi3: regulator-vccq-sdhi3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI3 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- /* External DU dot clocks */
- x21_clk: x21-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <33000000>;
- };
-
- x22_clk: x22-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <33000000>;
- };
-
- x23_clk: x23-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-};
-
-&a57_0 {
- cpu-supply = <&dvfs>;
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- tx-internal-delay-ps = <2000>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
- };
-};
-
-&csi20 {
- status = "okay";
-
- ports {
- port@0 {
- csi20_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1>;
- remote-endpoint = <&adv7482_txb>;
- };
- };
- };
-};
-
-&csi40 {
- status = "okay";
-
- ports {
- port@0 {
- csi40_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&adv7482_txa>;
- };
- };
- };
-};
-
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- ports {
- port@0 {
- du_out_rgb: endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- };
-};
-
-&ehci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&hdmi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi0_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint1>;
- };
- };
- };
-};
-
-#ifdef SOC_HAS_HDMI1
-&hdmi1 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-#endif /* SOC_HAS_HDMI1 */
-
-&hscif1 {
- pinctrl-0 = <&hscif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- /* Please only enable hscif1 or scif1 */
- status = "okay";
-};
-
-&hsusb {
- dr_mode = "otg";
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
-
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-
- cs2000: clk_multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&i2c4 {
- status = "okay";
-
- pca9654: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- video-receiver@70 {
- compatible = "adi,adv7482";
- reg = <0x70 0x71 0x72 0x73 0x74 0x75
- 0x60 0x61 0x62 0x63 0x64 0x65>;
- reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
- "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
-
- interrupt-parent = <&gpio6>;
- interrupt-names = "intrq1", "intrq2";
- interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
- <31 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@7 {
- reg = <7>;
-
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_con>;
- };
- };
-
- port@8 {
- reg = <8>;
-
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in_con>;
- };
- };
-
- port@a {
- reg = <10>;
-
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
-
- port@b {
- reg = <11>;
-
- adv7482_txb: endpoint {
- clock-lanes = <0>;
- data-lanes = <1>;
- remote-endpoint = <&csi20_in>;
- };
- };
- };
- };
-
- csa_vdd: adc@7c {
- compatible = "maxim,max9611";
- reg = <0x7c>;
-
- shunt-resistor-micro-ohms = <5000>;
- };
-
- csa_dvfs: adc@7f {
- compatible = "maxim,max9611";
- reg = <0x7f>;
-
- shunt-resistor-micro-ohms = <5000>;
- };
-};
-
-&i2c_dvfs {
- status = "okay";
-
- clock-frequency = <400000>;
-
- pmic: pmic@30 {
- pinctrl-0 = <&irq0_pins>;
- pinctrl-names = "default";
-
- compatible = "rohm,bd9571mwv";
- reg = <0x30>;
- interrupt-parent = <&intc_ex>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- rohm,ddr-backup-power = <0xf>;
- rohm,rstbmode-level;
-
- regulators {
- dvfs: dvfs {
- regulator-name = "dvfs";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1030000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-};
-
-&ohci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pciec0 {
- status = "okay";
-};
-
-&pciec1 {
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- avb_pins: avb {
- mux {
- groups = "avb_link", "avb_mdio", "avb_mii";
- function = "avb";
- };
-
- pins_mdio {
- groups = "avb_mdio";
- drive-strength = <24>;
- };
-
- pins_mii_tx {
- pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
- "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
- drive-strength = <12>;
- };
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
- function = "du";
- };
-
- hscif1_pins: hscif1 {
- groups = "hscif1_data_a", "hscif1_ctrl_a";
- function = "hscif1";
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- irq0_pins: irq0 {
- groups = "intc_ex_irq0";
- function = "intc_ex";
- };
-
- keys_pins: keys {
- pins = "GP_5_17", "GP_5_20", "GP_5_22";
- bias-pull-up;
- };
-
- pwm1_pins: pwm1 {
- groups = "pwm1_a";
- function = "pwm1";
- };
-
- scif1_pins: scif1 {
- groups = "scif1_data_a", "scif1_ctrl";
- function = "scif1";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <3300>;
- };
-
- sdhi3_pins_uhs: sd3_uhs {
- groups = "sdhi3_data4", "sdhi3_ctrl";
- function = "sdhi3";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- usb1_pins: usb1 {
- mux {
- groups = "usb1";
- function = "usb1";
- };
-
- ovc {
- pins = "GP_6_27";
- bias-pull-up;
- };
-
- pwen {
- pins = "GP_6_26";
- bias-pull-down;
- };
- };
-
- usb30_pins: usb30 {
- groups = "usb30";
- function = "usb30";
- };
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
- pinctrl-names = "default";
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <12288000 11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_port0: port@0 {
- reg = <0>;
- rsnd_endpoint0: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
-
- dai-format = "left_j";
- bitclock-master = <&rsnd_endpoint0>;
- frame-master = <&rsnd_endpoint0>;
-
- playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
- };
- };
-
- rsnd_port1: port@1 {
- reg = <1>;
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint1>;
- frame-master = <&rsnd_endpoint1>;
-
- playback = <&ssi2>;
- };
- };
-
-#ifdef SOC_HAS_HDMI1
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
-#endif /* SOC_HAS_HDMI1 */
- };
-};
-
-&rpc {
- /* Left disabled. To be enabled by firmware when unlocked. */
-
- flash@0 {
- compatible = "cypress,hyperflash", "cfi-flash";
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootparam@0 {
- reg = <0x00000000 0x040000>;
- read-only;
- };
- bl2@40000 {
- reg = <0x00040000 0x140000>;
- read-only;
- };
- cert_header_sa6@180000 {
- reg = <0x00180000 0x040000>;
- read-only;
- };
- bl31@1c0000 {
- reg = <0x001c0000 0x040000>;
- read-only;
- };
- tee@200000 {
- reg = <0x00200000 0x440000>;
- read-only;
- };
- uboot@640000 {
- reg = <0x00640000 0x100000>;
- read-only;
- };
- dtb@740000 {
- reg = <0x00740000 0x080000>;
- };
- kernel@7c0000 {
- reg = <0x007c0000 0x1400000>;
- };
- user@1bc0000 {
- reg = <0x01bc0000 0x2440000>;
- };
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-#ifdef SOC_HAS_SATA
-&sata {
- status = "okay";
-};
-#endif /* SOC_HAS_SATA */
-
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- /* Please only enable hscif1 or scif1 */
- /* status = "okay"; */
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- no-sd;
- no-sdio;
- non-removable;
- fixed-emmc-driver-type = <1>;
- full-pwr-cycle-in-suspend;
- status = "okay";
-};
-
-&sdhi3 {
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi3>;
- vqmmc-supply = <&vccq_sdhi3>;
- cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&usb_extal_clk {
- clock-frequency = <50000000>;
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&vbus0_usb2>;
- status = "okay";
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&usb3_peri0 {
- phys = <&usb3_phy0>;
- phy-names = "usb";
-
- companion = <&xhci0>;
-
- status = "okay";
-};
-
-&usb3_phy0 {
- status = "okay";
-};
-
-&usb3s0_clk {
- clock-frequency = <100000000>;
-};
-
-&vin0 {
- status = "okay";
-};
-
-&vin1 {
- status = "okay";
-};
-
-&vin2 {
- status = "okay";
-};
-
-&vin3 {
- status = "okay";
-};
-
-&vin4 {
- status = "okay";
-};
-
-&vin5 {
- status = "okay";
-};
-
-&vin6 {
- status = "okay";
-};
-
-&vin7 {
- status = "okay";
-};
-
-&xhci0 {
- pinctrl-0 = <&usb30_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-#ifdef SOC_HAS_USB2_CH2
-&ehci2 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&pfc {
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-};
-
-&usb2_phy2 {
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-#endif /* SOC_HAS_USB2_CH2 */
diff --git a/arch/arm/dts/salvator-x.dtsi b/arch/arm/dts/salvator-x.dtsi
deleted file mode 100644
index ddee50e..0000000
--- a/arch/arm/dts/salvator-x.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X board
- *
- * Copyright (C) 2015-2016 Renesas Electronics Corp.
- */
-
-#include "salvator-common.dtsi"
-
-/ {
- model = "Renesas Salvator-X board";
- compatible = "renesas,salvator-x";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&i2c4 {
- clock-frequency = <400000>;
-
- versaclock5: clock-generator@6a {
- compatible = "idt,5p49v5923";
- reg = <0x6a>;
- #clock-cells = <1>;
- clocks = <&x23_clk>;
- clock-names = "xin";
- };
-};
diff --git a/arch/arm/dts/salvator-xs.dtsi b/arch/arm/dts/salvator-xs.dtsi
deleted file mode 100644
index 08b9256..0000000
--- a/arch/arm/dts/salvator-xs.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X 2nd version board
- *
- * Copyright (C) 2015-2017 Renesas Electronics Corp.
- */
-
-#include "salvator-common.dtsi"
-
-/ {
- model = "Renesas Salvator-X 2nd version board";
- compatible = "renesas,salvator-xs";
-};
-
-&extal_clk {
- clock-frequency = <16640000>;
-};
-
-&i2c4 {
- clock-frequency = <400000>;
-
- versaclock6: clock-generator@6a {
- compatible = "idt,5p49v6901";
- reg = <0x6a>;
- #clock-cells = <1>;
- clocks = <&x23_clk>;
- clock-names = "xin";
- };
-};
-
-#ifdef SOC_HAS_SATA
-&pca9654 {
- pcie-sata-switch-hog {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-low; /* enable SATA by default */
- line-name = "PCIE/SATA switch";
- };
-};
-
-/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
-#endif /* SOC_HAS_SATA */
-
-#ifdef SOC_HAS_USB2_CH3
-&ehci3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&hsusb3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ohci3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&pfc {
- /*
- * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
- * (when SW31 is the default setting on Salvator-XS).
- * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
- * r8a77951 with Salvator-XS.
- * Hence the SW31 setting must be changed like 2) below.
- * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
- * - Connect GP6_3[01] to ADV7842.
- * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
- * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
- * - Connect GP6_{04,21} to ADV7842.
- */
- usb2_ch3_pins: usb2_ch3 {
- groups = "usb2_ch3";
- function = "usb2_ch3";
- };
-};
-
-&usb2_phy3 {
- pinctrl-0 = <&usb2_ch3_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-#endif /* SOC_HAS_USB2_CH3 */
diff --git a/arch/arm/dts/ulcb-audio-graph-card.dtsi b/arch/arm/dts/ulcb-audio-graph-card.dtsi
deleted file mode 100644
index 3be54df..0000000
--- a/arch/arm/dts/ulcb-audio-graph-card.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for ULCB + Audio Graph Card
- *
- * Copyright (C) 2022 Renesas Electronics Corp.
- */
-
-/*
- * (A) CPU0 <-----> ak4613
- * (B) CPU1 -----> HDMI
- *
- * (A) aplay -D plughw:0,0 xxx.wav
- * (B) aplay -D plughw:0,1 xxx.wav
- *
- * (A) arecord -D plughw:0,0 xxx.wav
- */
-
-/ {
- sound_card: sound {
- compatible = "audio-graph-card";
- label = "rcar-sound";
-
- dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
- &rsnd_port1 /* (B) CPU1 -> HDMI */
- >;
- };
-};
-
-&ak4613 {
- #sound-dai-cells = <0>;
-
- port {
- /*
- * (A) CPU0 <-> ak4613
- */
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_for_ak4613>;
- };
- };
-};
-
-&hdmi0 {
- ports {
- port@2 {
- /*
- * (B) CPU1 -> HDMI
- */
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_for_hdmi>;
- };
- };
- };
-};
-
-&rcar_sound {
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_port0: port@0 {
- /*
- * (A) CPU0 <-> ak4613
- */
- reg = <0>;
- rsnd_for_ak4613: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- bitclock-master;
- frame-master;
- playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
- };
- };
- rsnd_port1: port@1 {
- /*
- * (B) CPU1 -> HDMI
- */
- reg = <1>;
- rsnd_for_hdmi: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- bitclock-master;
- frame-master;
- playback = <&ssi2>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/ulcb-audio-graph-card2.dtsi b/arch/arm/dts/ulcb-audio-graph-card2.dtsi
deleted file mode 100644
index 5ebec12..0000000
--- a/arch/arm/dts/ulcb-audio-graph-card2.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for ULCB + Audio Graph Card2
- *
- * Copyright (C) 2022 Renesas Electronics Corp.
- */
-
-/*
- * (A) CPU0 <----> ak4613
- * (B) CPU1 ----> HDMI
- *
- * (A) aplay -D plughw:0,0 xxx.wav
- * (B) aplay -D plughw:0,1 xxx.wav
- *
- * (A) arecord -D plughw:0,0 xxx.wav
- */
-#include "ulcb-audio-graph-card.dtsi"
-
-&sound_card {
- compatible = "audio-graph-card2";
-
- /delete-property/ dais;
- links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
- &rsnd_port1 /* (B) CPU1 -> HDMI */
- >;
-};
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
deleted file mode 100644
index 0be2716..0000000
--- a/arch/arm/dts/ulcb.dtsi
+++ /dev/null
@@ -1,509 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car Gen3 ULCB board
- *
- * Copyright (C) 2016 Renesas Electronics Corp.
- * Copyright (C) 2016 Cogent Embedded, Inc.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Renesas R-Car Gen3 ULCB board";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- serial0 = &scif2;
- ethernet0 = &avb;
- mmc0 = &sdhi2;
- mmc1 = &sdhi0;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- audio_clkout: audio-clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12288000>;
- };
-
- hdmi0-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi0_con: endpoint {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
- };
- };
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- key-1 {
- linux,code = <KEY_1>;
- label = "SW3";
- wakeup-source;
- debounce-interval = <20>;
- gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led5 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
- led6 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- x23_clk: x23-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-};
-
-&a57_0 {
- cpu-supply = <&dvfs>;
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- tx-internal-delay-ps = <2000>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
- };
-};
-
-&du {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&hdmi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi0_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
- port@2 {
- reg = <2>;
- };
- };
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- clock-frequency = <100000>;
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk-multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&i2c4 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- versaclock5: clock-generator@6a {
- compatible = "idt,5p49v5925";
- reg = <0x6a>;
- #clock-cells = <1>;
- clocks = <&x23_clk>;
- clock-names = "xin";
- };
-};
-
-&i2c_dvfs {
- status = "okay";
-
- clock-frequency = <400000>;
-
- pmic: pmic@30 {
- pinctrl-0 = <&irq0_pins>;
- pinctrl-names = "default";
-
- compatible = "rohm,bd9571mwv";
- reg = <0x30>;
- interrupt-parent = <&intc_ex>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- rohm,ddr-backup-power = <0xf>;
- rohm,rstbmode-pulse;
-
- regulators {
- dvfs: dvfs {
- regulator-name = "dvfs";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1030000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- avb_pins: avb {
- mux {
- groups = "avb_link", "avb_mdio", "avb_mii";
- function = "avb";
- };
-
- pins_mdio {
- groups = "avb_mdio";
- drive-strength = <24>;
- };
-
- pins_mii_tx {
- pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
- "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
- drive-strength = <12>;
- };
- };
-
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
- irq0_pins: irq0 {
- groups = "intc_ex_irq0";
- function = "intc_ex";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
- function = "ssi";
- };
-
- sound_clk_pins: sound-clk {
- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout3_a";
- function = "audio_clk";
- };
-
- usb1_pins: usb1 {
- groups = "usb1";
- function = "usb1";
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
- pinctrl-names = "default";
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <12288000 11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>,
- <&audio_clk_c>,
- <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
-};
-
-&rpc {
- /* Left disabled. To be enabled by firmware when unlocked. */
-
- flash@0 {
- compatible = "cypress,hyperflash", "cfi-flash";
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootparam@0 {
- reg = <0x00000000 0x040000>;
- read-only;
- };
- bl2@40000 {
- reg = <0x00040000 0x140000>;
- read-only;
- };
- cert_header_sa6@180000 {
- reg = <0x00180000 0x040000>;
- read-only;
- };
- bl31@1c0000 {
- reg = <0x001c0000 0x040000>;
- read-only;
- };
- tee@200000 {
- reg = <0x00200000 0x440000>;
- read-only;
- };
- uboot@640000 {
- reg = <0x00640000 0x100000>;
- read-only;
- };
- dtb@740000 {
- reg = <0x00740000 0x080000>;
- };
- kernel@7c0000 {
- reg = <0x007c0000 0x1400000>;
- };
- user@1bc0000 {
- reg = <0x01bc0000 0x2440000>;
- };
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- no-sd;
- no-sdio;
- non-removable;
- full-pwr-cycle-in-suspend;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-
-/*
- * For sound-test.
- *
- * We can switch Audio Card for testing
- *
- * #include "ulcb-simple-audio-card.dtsi"
- * #include "ulcb-simple-audio-card-mix+split.dtsi"
- * #include "ulcb-audio-graph-card.dtsi"
- * #include "ulcb-audio-graph-card-mix+split.dtsi"
- * #include "ulcb-audio-graph-card2-mix+split.dtsi"
- */
-#include "ulcb-audio-graph-card2.dtsi"
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index af00ee1..cad8bb0 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -249,6 +249,7 @@
select OF_CONTROL
select PINCTRL
select PINCTRL_EXYNOS850
+ imply OF_UPSTREAM
endchoice
endif
diff --git a/arch/arm/mach-exynos/mmu-arm64.c b/arch/arm/mach-exynos/mmu-arm64.c
index 30e5228..4c15495 100644
--- a/arch/arm/mach-exynos/mmu-arm64.c
+++ b/arch/arm/mach-exynos/mmu-arm64.c
@@ -101,6 +101,14 @@
static struct mm_region exynos850_mem_map[] = {
{
+ /* iRAM */
+ .virt = 0x02000000UL,
+ .phys = 0x02000000UL,
+ .size = SZ_2M,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
/* Peripheral block */
.virt = 0x10000000UL,
.phys = 0x10000000UL,
diff --git a/arch/riscv/cpu/andes/cache.c b/arch/riscv/cpu/andes/cache.c
index 7d3df87..bb57498 100644
--- a/arch/riscv/cpu/andes/cache.c
+++ b/arch/riscv/cpu/andes/cache.c
@@ -43,9 +43,7 @@
void flush_dcache_all(void)
{
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- csr_write(CSR_MCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL);
-#endif
+ csr_write(CSR_UCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL);
}
void flush_dcache_range(unsigned long start, unsigned long end)
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index a9e1935..8e58f64 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -210,10 +210,6 @@
bnez s2, secondary_hart_loop
#endif
- /* Enable cache */
- jal icache_enable
- jal dcache_enable
-
#ifdef CONFIG_DEBUG_UART
jal debug_uart_init
#endif
diff --git a/arch/riscv/include/asm/arch-andes/csr.h b/arch/riscv/include/asm/arch-andes/csr.h
index 028fd01..7d6104a 100644
--- a/arch/riscv/include/asm/arch-andes/csr.h
+++ b/arch/riscv/include/asm/arch-andes/csr.h
@@ -12,7 +12,7 @@
#define CSR_MCACHE_CTL 0x7ca
#define CSR_MMISC_CTL 0x7d0
-#define CSR_MCCTLCOMMAND 0x7cc
+#define CSR_UCCTLCOMMAND 0x80c
/* mcache_ctl register */
diff --git a/board/beacon/beacon-rzg2m/MAINTAINERS b/board/beacon/beacon-rzg2m/MAINTAINERS
index f8042bb..a4a920a 100644
--- a/board/beacon/beacon-rzg2m/MAINTAINERS
+++ b/board/beacon/beacon-rzg2m/MAINTAINERS
@@ -1,5 +1,6 @@
BEACON_RZG2M BOARD
M: Adam Ford <aford173@gmail.com>
+M: Marek Vasut <marek.vasut+renesas@mailbox.org>
S: Maintained
F: board/beacon/beacon-rzg2m/
F: include/configs/beacon-rzg2m.h
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 0f0a9c5..8537b96 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -29,18 +29,6 @@
#include <fdt_support.h>
#include "igep00x0.h"
-static const struct ns16550_plat igep_serial = {
- .base = OMAP34XX_UART3,
- .reg_shift = 2,
- .clock = V_NS16550_CLK,
- .fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DRVINFO(igep_uart) = {
- "ns16550_serial",
- &igep_serial
-};
-
/*
* Routine: get_board_revision
* Description: GPIO_28 and GPIO_129 are used to read board and revision from
diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c
index 0f5f829..31523c0 100644
--- a/board/microchip/mpfs_icicle/mpfs_icicle.c
+++ b/board/microchip/mpfs_icicle/mpfs_icicle.c
@@ -73,25 +73,13 @@
int board_late_init(void)
{
u32 ret;
- u32 node;
+ int node;
u8 idx;
u8 device_serial_number[16] = { 0 };
unsigned char mac_addr[6];
char icicle_mac_addr[20];
void *blob = (void *)gd->fdt_blob;
- node = fdt_path_offset(blob, "/soc/ethernet@20112000");
- if (node < 0) {
- printf("No ethernet0 path offset\n");
- return -ENODEV;
- }
-
- ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6);
- if (ret) {
- printf("No local-mac-address property for ethernet@20112000\n");
- return -EINVAL;
- }
-
read_device_serial_number(device_serial_number, 16);
/* Update MAC address with device serial number */
@@ -102,10 +90,13 @@
mac_addr[4] = device_serial_number[1];
mac_addr[5] = device_serial_number[0];
- ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
- if (ret) {
- printf("Error setting local-mac-address property for ethernet@20112000\n");
- return -ENODEV;
+ node = fdt_path_offset(blob, "/soc/ethernet@20112000");
+ if (node >= 0) {
+ ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
+ if (ret) {
+ printf("Error setting local-mac-address property for ethernet@20112000\n");
+ return -ENODEV;
+ }
}
icicle_mac_addr[0] = '[';
diff --git a/board/samsung/e850-96/MAINTAINERS b/board/samsung/e850-96/MAINTAINERS
index e8b9365..b098794 100644
--- a/board/samsung/e850-96/MAINTAINERS
+++ b/board/samsung/e850-96/MAINTAINERS
@@ -2,7 +2,6 @@
M: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
F: arch/arm/dts/exynos850-e850-96-u-boot.dtsi
-F: arch/arm/dts/exynos850-e850-96.dts
F: board/samsung/e850-96/
F: configs/e850-96_defconfig
F: doc/board/samsung/e850-96.rst
diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c
index b555189..b794b73 100644
--- a/board/starfive/visionfive2/spl.c
+++ b/board/starfive/visionfive2/spl.c
@@ -86,6 +86,43 @@
"tx-internal-delay-ps", "0"},
};
+static const struct starfive_vf2_pro star64_pine64[] = {
+ {"/soc/ethernet@16030000", "starfive,tx-use-rgmii-clk", NULL},
+ {"/soc/ethernet@16040000", "starfive,tx-use-rgmii-clk", NULL},
+
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,tx-clk-adj-enabled", NULL},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,tx-clk-10-inverted", NULL},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,tx-clk-100-inverted", NULL},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,tx-clk-1000-inverted", NULL},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,rx-clk-drv-microamp", "2910"},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "motorcomm,rx-data-drv-microamp", "2910"},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "rx-internal-delay-ps", "1900"},
+ {"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+ "tx-internal-delay-ps", "1500"},
+
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "motorcomm,tx-clk-adj-enabled", NULL},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "motorcomm,tx-clk-10-inverted", NULL},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "motorcomm,tx-clk-100-inverted", NULL},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "motorcomm,rx-clk-drv-microamp", "2910"},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "motorcomm,rx-data-drv-microamp", "2910"},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "rx-internal-delay-ps", "0"},
+ {"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+ "tx-internal-delay-ps", "300"},
+};
+
void spl_fdt_fixup_mars(void *fdt)
{
static const char compat[] = "milkv,mars\0starfive,jh7110";
@@ -250,6 +287,56 @@
}
}
+void spl_fdt_fixup_star64(void *fdt)
+{
+ static const char compat[] = "pine64,star64\0starfive,jh7110";
+ u32 phandle;
+ u8 i;
+ int offset;
+ int ret;
+
+ fdt_setprop(fdt, fdt_path_offset(fdt, "/"), "compatible", compat, sizeof(compat));
+ fdt_setprop_string(fdt, fdt_path_offset(fdt, "/"), "model",
+ "Pine64 Star64");
+
+ /* gmac0 */
+ offset = fdt_path_offset(fdt, "/soc/clock-controller@17000000");
+ phandle = fdt_get_phandle(fdt, offset);
+ offset = fdt_path_offset(fdt, "/soc/ethernet@16030000");
+
+ fdt_setprop_u32(fdt, offset, "assigned-clocks", phandle);
+ fdt_appendprop_u32(fdt, offset, "assigned-clocks", JH7110_AONCLK_GMAC0_TX);
+ fdt_setprop_u32(fdt, offset, "assigned-clock-parents", phandle);
+ fdt_appendprop_u32(fdt, offset, "assigned-clock-parents",
+ JH7110_AONCLK_GMAC0_RMII_RTX);
+
+ /* gmac1 */
+ offset = fdt_path_offset(fdt, "/soc/clock-controller@13020000");
+ phandle = fdt_get_phandle(fdt, offset);
+ offset = fdt_path_offset(fdt, "/soc/ethernet@16040000");
+
+ fdt_setprop_u32(fdt, offset, "assigned-clocks", phandle);
+ fdt_appendprop_u32(fdt, offset, "assigned-clocks", JH7110_SYSCLK_GMAC1_TX);
+ fdt_setprop_u32(fdt, offset, "assigned-clock-parents", phandle);
+ fdt_appendprop_u32(fdt, offset, "assigned-clock-parents",
+ JH7110_SYSCLK_GMAC1_RMII_RTX);
+
+ for (i = 0; i < ARRAY_SIZE(star64_pine64); i++) {
+ offset = fdt_path_offset(fdt, star64_pine64[i].path);
+
+ if (star64_pine64[i].value)
+ ret = fdt_setprop_u32(fdt, offset, star64_pine64[i].name,
+ dectoul(star64_pine64[i].value, NULL));
+ else
+ ret = fdt_setprop_empty(fdt, offset, star64_pine64[i].name);
+
+ if (ret) {
+ pr_err("%s set prop %s fail.\n", __func__, star64_pine64[i].name);
+ break;
+ }
+ }
+}
+
void spl_perform_fixups(struct spl_image_info *spl_image)
{
u8 version;
@@ -278,6 +365,8 @@
spl_fdt_fixup_version_b(spl_image->fdt_addr);
break;
};
+ } else if (!strncmp(product_id, "STAR64", 6)) {
+ spl_fdt_fixup_star64(spl_image->fdt_addr);
} else {
pr_err("Unknown product %s\n", product_id);
};
diff --git a/board/starfive/visionfive2/starfive_visionfive2.c b/board/starfive/visionfive2/starfive_visionfive2.c
index 6be5348..f611460 100644
--- a/board/starfive/visionfive2/starfive_visionfive2.c
+++ b/board/starfive/visionfive2/starfive_visionfive2.c
@@ -27,6 +27,8 @@
"starfive/jh7110-starfive-visionfive-2-v1.2a.dtb"
#define FDTFILE_VISIONFIVE2_1_3B \
"starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
+#define FDTFILE_PINE64_STAR64 \
+ "starfive/jh7110-pine64-star64.dtb"
/* enable U74-mc hart1~hart4 prefetcher */
static void enable_prefetcher(void)
@@ -87,6 +89,8 @@
fdtfile = FDTFILE_VISIONFIVE2_1_3B;
break;
}
+ } else if (!strncmp(product_id, "STAR64", 6)) {
+ fdtfile = FDTFILE_PINE64_STAR64;
} else {
log_err("Unknown product\n");
return;
diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig
index bb41635..38b9968 100644
--- a/configs/e850-96_defconfig
+++ b/configs/e850-96_defconfig
@@ -7,7 +7,7 @@
CONFIG_ARCH_EXYNOS9=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf8c00000
-CONFIG_DEFAULT_DEVICE_TREE="exynos850-e850-96"
+CONFIG_DEFAULT_DEVICE_TREE="exynos/exynos850-e850-96"
CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_AUTOBOOT is not set
# CONFIG_DISPLAY_CPUINFO is not set
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 261f71a..87fd279 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -1,15 +1,18 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_ENV_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="omap3-igep0020"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-igep0020"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_IGEP00X0=y
CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
@@ -39,16 +42,7 @@
CONFIG_SPL_UBI_INFO_ADDR=0x88080000
CONFIG_SPL_UBI_VOL_IDS=8
CONFIG_SPL_UBI_LOAD_MONITOR_ID=0
-CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
-CONFIG_SPL_UBI_LOAD_ARGS_ID=4
CONFIG_SPL_ONENAND_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
CONFIG_CMD_SPL=y
CONFIG_CMD_NAND=y
CONFIG_CMD_ONENAND=y
@@ -58,7 +52,12 @@
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
+CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_UBI=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -68,6 +67,7 @@
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_NET is not set
+CONFIG_SPL_DM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
@@ -80,8 +80,6 @@
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
CONFIG_BCH=y
diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig
index 4aabb1f..234c965 100644
--- a/configs/rzg2_beacon_defconfig
+++ b/configs/rzg2_beacon_defconfig
@@ -3,7 +3,8 @@
CONFIG_TEXT_BASE=0x50000000
CONFIG_SYS_MALLOC_LEN=0x4000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ENV_OFFSET=0x0
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-beacon-rzg2m-kit"
CONFIG_RCAR_GEN3=y
diff --git a/doc/board/starfive/index.rst b/doc/board/starfive/index.rst
index d369b98..72ab6dd 100644
--- a/doc/board/starfive/index.rst
+++ b/doc/board/starfive/index.rst
@@ -8,4 +8,5 @@
milk-v_mars
milk-v_mars_cm
+ pine64_star64
visionfive2
diff --git a/doc/board/starfive/pine64_star64.rst b/doc/board/starfive/pine64_star64.rst
new file mode 100644
index 0000000..52e9a90
--- /dev/null
+++ b/doc/board/starfive/pine64_star64.rst
@@ -0,0 +1,201 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Pine64 Star64
+=============
+
+U-Boot for the Star64 uses the same U-Boot binaries as the VisionFive 2 board.
+In U-Boot SPL the actual board is detected and the device-tree patched
+accordingly.
+
+Building
+~~~~~~~~
+
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: none
+
+ export CROSS_COMPILE=<riscv64 toolchain prefix>
+
+The M-mode software OpenSBI provides the supervisor binary interface (SBI) and
+is responsible for the switch to S-Mode. It is a prerequisite to build U-Boot.
+Support for the JH7110 was introduced in OpenSBI 1.2. It is recommended to use
+a current release.
+
+.. code-block:: console
+
+ git clone https://github.com/riscv/opensbi.git
+ cd opensbi
+ make PLATFORM=generic FW_TEXT_START=0x40000000
+
+Now build the U-Boot SPL and U-Boot proper.
+
+.. code-block:: console
+
+ cd <U-Boot-dir>
+ make starfive_visionfive2_defconfig
+ make OPENSBI=$(opensbi_dir)/build/platform/generic/firmware/fw_dynamic.bin
+
+This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
+as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
+
+Device-tree selection
+~~~~~~~~~~~~~~~~~~~~~
+
+U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb.
+
+To overrule this selection the variable can be set manually and saved in the
+environment
+
+::
+
+ env set fdtfile my_device-tree.dtb
+ env save
+
+or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
+provide a default value.
+
+Boot source selection
+~~~~~~~~~~~~~~~~~~~~~
+
+Boot mode is selected by an MSEL-DIP marked S1804 and GPIO_0 position adjacent
+to the 40pin GPIO header. ON/ONKE and number markings of the MSEL-DIP are
+misleading; Instead refer to the ``L`` (0) and ``H`` (1) silkscreen for
+accurate selection.
+
++ (QSPI) Flash: 00
++ SD: 01
++ EMMC: 10
++ UART: 11
+
+Preparing the SD-Card
+~~~~~~~~~~~~~~~~~~~~~
+
+The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
+partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
+to choose any partition number.
+
+With the default configuration U-Boot SPL loads the U-Boot FIT image
+(u-boot.itb) from partition 2 (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2).
+When formatting it is recommended to use GUID
+BC13C2FF-59E6-4262-A352-B275FD6F7172 for this partition.
+
+The FIT image (u-boot.itb) is a combination of OpenSBI's fw_dynamic.bin,
+u-boot-nodtb.bin and the device tree blob.
+
+Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch)
+
+.. code-block:: bash
+
+ sudo sgdisk --clear \
+ --set-alignment=2 \
+ --new=1:4096:8191 --change-name=1:spl --typecode=1:2E54B353-1271-4842-806F-E436D6AF6985\
+ --new=2:8192:16383 --change-name=2:uboot --typecode=2:BC13C2FF-59E6-4262-A352-B275FD6F7172 \
+ --new=3:16384:1654784 --change-name=3:system --typecode=3:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 \
+ /dev/sdb
+
+Copy U-Boot to the SD card
+
+.. code-block:: bash
+
+ sudo dd if=u-boot-spl.bin.normal.out of=/dev/sdb1
+ sudo dd if=u-boot.itb of=/dev/sdb2
+
+ sudo mount /dev/sdb3 /mnt/
+ sudo cp u-boot-spl.bin.normal.out /mnt/
+ sudo cp u-boot.itb /mnt/
+ sudo cp Image.gz /mnt/
+ sudo cp initramfs.cpio.gz /mnt/
+ sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
+ sudo umount /mnt
+
+Booting
+~~~~~~~
+
+Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+
+Serial Number and MAC address issues
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+U-Boot requires valid EEPROM data to determine which board-specific fix-up to
+apply at runtime. This affects the size of memory initialized, network mac
+address numbering, and tuning of the network PHYs.
+
+The Star64 does not currently ship with unique serial numbers per-device.
+Devices follow a pattern where the last mac address bytes are a sum of 0x7558
+and the serial number (lower port mac0), or a sum of 0x7559 and the serial
+number (upper port mac1).
+
+As tested there are several 4gb model units where the serial number and network
+mac addresses collide with other devices (serial
+``STAR64V1-2310-D004E000-00000005``, MACs ``6c:cf:39:00:75:61``,
+``6c:cf:39:00:75:62``)
+
+Some early Star64 boards shipped with an uninitialized EEPROM and no write
+protect pull-up resistor in place. Later units of all 4gb and 8gb models
+sharing the same serial number in EEPROM data will have this problem that the
+network mac addresses are alike between different models and this may be
+corrected by defeating the write protect resistor to write new values. As an
+alternative to this, it may be worked around by overriding the mac addresses
+via U-Boot environment variables.
+
+It is required for any unit having uninitialized EEPROM and recommended for
+all later Star64 4gb model units (not properly serialized) to have decided on a
+new 6-byte serial number. This serial number should be high enough to
+avoid collision with other JH7110 boards and low enough not to overflow i.e.
+between ``cafe00`` and ``f00d00``.
+
+Update EEPROM values
+^^^^^^^^^^^^^^^^^^^^
+
+1. Prepare EEPROM data in memory
+
+::
+
+ ## When there is no error to load existing data:
+ mac read_eeprom
+
+ ## When there is an error to load non-existing data:
+ # "DRAM: Not a StarFive EEPROM data format - magic error"
+ mac initialize
+
+2. Set Star64 values
+
+::
+
+ ## Common values
+ mac vendor PINE64
+ mac pcb_revision c1
+ mac bom_revision A
+
+ ## Device-specific values
+ # Year 2023 week 10 production date, 8GB DRAM, optional eMMC, serial cdef01
+ mac product_id STAR64V1-2310-D008E000-00cdef01
+
+ # Last three bytes mac0: 0x7558 + serial number 0xcdef01
+ mac mac0_address 6c:cf:39:ce:64:59
+
+ # Last three bytes mac1: 0x7559 + serial number 0xcdef01
+ mac mac1_address 6c:cf:39:ce:64:5a
+
+3. Defeat write-protect pull-up resistor (if installed) and write to EEPROM
+
+::
+
+ mac write_eeprom
+
+Set Variables in U-Boot
+^^^^^^^^^^^^^^^^^^^^^^^
+
+.. note:: Changing just the serial number will not alter your MAC address
+
+The MAC addresses may be "set" as follows by writing as a custom config to SPI
+(Change the last 3 bytes of MAC addreses as appropriate):
+
+::
+
+ env set serial# STAR64V1-2310-D008E000-00cdef01
+ env set ethaddr 6c:cf:39:ce:64:59
+ env set eth1addr 6c:cf:39:ce:64:5a
+ env save
+ reset
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index 383f448..c9fb07f 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -73,7 +73,7 @@
* U-Boot v2024.07-rc3 was released on Mon 20 May 2024.
-.. * U-Boot v2024.07-rc4 was released on Mon 03 June 2024.
+* U-Boot v2024.07-rc4 was released on Mon 03 June 2024.
.. * U-Boot v2024.07-rc5 was released on Mon 17 June 2024.
diff --git a/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml b/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml
deleted file mode 100644
index a0906ef..0000000
--- a/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml
+++ /dev/null
@@ -1,307 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos850 SoC clock controller
-
-maintainers:
- - Sam Protsenko <semen.protsenko@linaro.org>
-
-description: |
- Exynos850 clock controller is comprised of several CMU units, generating
- clocks for different domains. Those CMU units are modeled as separate device
- tree nodes, and might depend on each other. Root clocks in that clock tree are
- two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
- clocks must be defined as fixed-rate clocks in dts.
-
- CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
- dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
-
- Each clock is assigned an identifier and client nodes can use this identifier
- to specify the clock which they consume. All clocks available for usage
- in clock consumer nodes are defined as preprocessor macros in
- 'dt-bindings/clock/exynos850.h' header.
-
-properties:
- compatible:
- enum:
- - samsung,exynos850-cmu-top
- - samsung,exynos850-cmu-apm
- - samsung,exynos850-cmu-aud
- - samsung,exynos850-cmu-cmgp
- - samsung,exynos850-cmu-core
- - samsung,exynos850-cmu-dpu
- - samsung,exynos850-cmu-g3d
- - samsung,exynos850-cmu-hsi
- - samsung,exynos850-cmu-is
- - samsung,exynos850-cmu-mfcmscl
- - samsung,exynos850-cmu-peri
-
- clocks:
- minItems: 1
- maxItems: 5
-
- clock-names:
- minItems: 1
- maxItems: 5
-
- "#clock-cells":
- const: 1
-
- reg:
- maxItems: 1
-
-allOf:
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-top
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
-
- clock-names:
- items:
- - const: oscclk
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-apm
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_APM bus clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_clkcmu_apm_bus
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-aud
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: AUD clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_aud
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-cmgp
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_CMGP bus clock (from CMU_APM)
-
- clock-names:
- items:
- - const: oscclk
- - const: gout_clkcmu_cmgp_bus
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-core
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_CORE bus clock (from CMU_TOP)
- - description: CCI clock (from CMU_TOP)
- - description: eMMC clock (from CMU_TOP)
- - description: SSS clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_core_bus
- - const: dout_core_cci
- - const: dout_core_mmc_embd
- - const: dout_core_sss
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-dpu
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: DPU clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_dpu
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-g3d
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: G3D clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_g3d_switch
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-hsi
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: External RTC clock (32768 Hz)
- - description: CMU_HSI bus clock (from CMU_TOP)
- - description: SD card clock (from CMU_TOP)
- - description: USB 2.0 DRD clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: rtcclk
- - const: dout_hsi_bus
- - const: dout_hsi_mmc_card
- - const: dout_hsi_usb20drd
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-is
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_IS bus clock (from CMU_TOP)
- - description: Image Texture Processing core clock (from CMU_TOP)
- - description: Visual Recognition Accelerator clock (from CMU_TOP)
- - description: Geometric Distortion Correction clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_is_bus
- - const: dout_is_itp
- - const: dout_is_vra
- - const: dout_is_gdc
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-mfcmscl
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: Multi-Format Codec clock (from CMU_TOP)
- - description: Memory to Memory Scaler clock (from CMU_TOP)
- - description: Multi-Channel Scaler clock (from CMU_TOP)
- - description: JPEG codec clock (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_mfcmscl_mfc
- - const: dout_mfcmscl_m2m
- - const: dout_mfcmscl_mcsc
- - const: dout_mfcmscl_jpeg
-
- - if:
- properties:
- compatible:
- contains:
- const: samsung,exynos850-cmu-peri
-
- then:
- properties:
- clocks:
- items:
- - description: External reference clock (26 MHz)
- - description: CMU_PERI bus clock (from CMU_TOP)
- - description: UART clock (from CMU_TOP)
- - description: Parent clock for HSI2C and SPI (from CMU_TOP)
-
- clock-names:
- items:
- - const: oscclk
- - const: dout_peri_bus
- - const: dout_peri_uart
- - const: dout_peri_ip
-
-required:
- - compatible
- - "#clock-cells"
- - clocks
- - clock-names
- - reg
-
-additionalProperties: false
-
-examples:
- # Clock controller node for CMU_PERI
- - |
- #include <dt-bindings/clock/exynos850.h>
-
- cmu_peri: clock-controller@10030000 {
- compatible = "samsung,exynos850-cmu-peri";
- reg = <0x10030000 0x8000>;
- #clock-cells = <1>;
-
- clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
- <&cmu_top CLK_DOUT_PERI_UART>,
- <&cmu_top CLK_DOUT_PERI_IP>;
- clock-names = "oscclk", "dout_peri_bus",
- "dout_peri_uart", "dout_peri_ip";
- };
-
-...
diff --git a/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml b/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml
deleted file mode 100644
index 8e6423f..0000000
--- a/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml
+++ /dev/null
@@ -1,162 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung's Exynos USI (Universal Serial Interface)
-
-maintainers:
- - Sam Protsenko <semen.protsenko@linaro.org>
-
-description: |
- USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
- USI shares almost all internal circuits within each protocol, so only one
- protocol can be chosen at a time. USI is modeled as a node with zero or more
- child nodes, each representing a serial sub-node device. The mode setting
- selects which particular function will be used.
-
-properties:
- $nodename:
- pattern: "^usi@[0-9a-f]+$"
-
- compatible:
- enum:
- - samsung,exynos850-usi
-
- reg: true
-
- clocks: true
-
- clock-names: true
-
- ranges: true
-
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
- samsung,sysreg:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- - items:
- - description: phandle to System Register syscon node
- - description: offset of SW_CONF register for this USI controller
- description:
- Should be phandle/offset pair. The phandle to System Register syscon node
- (for the same domain where this USI controller resides) and the offset
- of SW_CONF register for this USI controller.
-
- samsung,mode:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Selects USI function (which serial protocol to use). Refer to
- <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
-
- samsung,clkreq-on:
- type: boolean
- description:
- Enable this property if underlying protocol requires the clock to be
- continuously provided without automatic gating. As suggested by SoC
- manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
- multi-master mode. Usually this property is needed if USI mode is set
- to "UART".
-
- This property is optional.
-
-patternProperties:
- "^i2c@[0-9a-f]+$":
- $ref: /schemas/i2c/i2c-exynos5.yaml
- description: Child node describing underlying I2C
-
- "^serial@[0-9a-f]+$":
- $ref: /schemas/serial/samsung_uart.yaml
- description: Child node describing underlying UART/serial
-
- "^spi@[0-9a-f]+$":
- $ref: /schemas/spi/samsung,spi.yaml
- description: Child node describing underlying SPI
-
-required:
- - compatible
- - ranges
- - "#address-cells"
- - "#size-cells"
- - samsung,sysreg
- - samsung,mode
-
-if:
- properties:
- compatible:
- contains:
- enum:
- - samsung,exynos850-usi
-
-then:
- properties:
- reg:
- maxItems: 1
-
- clocks:
- items:
- - description: Bus (APB) clock
- - description: Operating clock for UART/SPI/I2C protocol
-
- clock-names:
- items:
- - const: pclk
- - const: ipclk
-
- required:
- - reg
- - clocks
- - clock-names
-
-else:
- properties:
- reg: false
- clocks: false
- clock-names: false
- samsung,clkreq-on: false
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/soc/samsung,exynos-usi.h>
-
- usi0: usi@138200c0 {
- compatible = "samsung,exynos850-usi";
- reg = <0x138200c0 0x20>;
- samsung,sysreg = <&sysreg_peri 0x1010>;
- samsung,mode = <USI_V2_UART>;
- samsung,clkreq-on; /* needed for UART mode */
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&cmu_peri 32>, <&cmu_peri 31>;
- clock-names = "pclk", "ipclk";
-
- serial_0: serial@13820000 {
- compatible = "samsung,exynos850-uart";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu_peri 32>, <&cmu_peri 31>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
-
- hsi2c_0: i2c@13820000 {
- compatible = "samsung,exynosautov9-hsi2c";
- reg = <0x13820000 0xc0>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&cmu_peri 31>, <&cmu_peri 32>;
- clock-names = "hsi2c", "hsi2c_pclk";
- status = "disabled";
- };
- };
diff --git a/drivers/cache/cache-andes-l2.c b/drivers/cache/cache-andes-l2.c
index 45d29f2..bc6f7ed 100644
--- a/drivers/cache/cache-andes-l2.c
+++ b/drivers/cache/cache-andes-l2.c
@@ -30,7 +30,7 @@
volatile u64 cctl_command2;
volatile u64 cctl_access_line2;
volatile u64 cctl_command3;
- volatile u64 cctl_access_line4;
+ volatile u64 cctl_access_line3;
volatile u64 cctl_status;
};
@@ -97,13 +97,15 @@
struct andes_l2_plat *plat = dev_get_plat(dev);
volatile struct l2cache *regs = plat->regs;
u8 hart = gd->arch.boot_hart;
+
void __iomem *cctlcmd = (void __iomem *)CCTL_CMD_REG(regs, hart);
+ void __iomem *cctlstatus = (void __iomem *)CCTL_STATUS_REG(regs, hart);
if ((regs) && (readl(®s->control) & L2_ENABLE)) {
writel(L2_WBINVAL_ALL, cctlcmd);
- while ((readl(®s->cctl_status) & CCTL_STATUS_MSK(hart))) {
- if ((readl(®s->cctl_status) & CCTL_STATUS_ILLEGAL(hart))) {
+ while ((readl(cctlstatus) & CCTL_STATUS_MSK(hart))) {
+ if ((readl(cctlstatus) & CCTL_STATUS_ILLEGAL(hart))) {
printf("L2 flush illegal! hanging...");
hang();
}
diff --git a/dts/upstream/src/arm64/Makefile b/dts/upstream/src/arm64/Makefile
index 9a8f6aa..26a83d3 100644
--- a/dts/upstream/src/arm64/Makefile
+++ b/dts/upstream/src/arm64/Makefile
@@ -7,6 +7,10 @@
# Add any required device tree compiler flags here
DTC_FLAGS += -a 0x8
+ifdef CONFIG_RCAR_64
+DTC_FLAGS += -R 4 -p 0x1000
+endif
+
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
diff --git a/include/dt-bindings/clock/exynos850.h b/include/dt-bindings/clock/exynos850.h
deleted file mode 100644
index 3090e09..0000000
--- a/include/dt-bindings/clock/exynos850.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (C) 2021 Linaro Ltd.
- * Author: Sam Protsenko <semen.protsenko@linaro.org>
- *
- * Device Tree binding constants for Exynos850 clock controller.
- */
-
-#ifndef _DT_BINDINGS_CLOCK_EXYNOS_850_H
-#define _DT_BINDINGS_CLOCK_EXYNOS_850_H
-
-/* CMU_TOP */
-#define CLK_FOUT_SHARED0_PLL 1
-#define CLK_FOUT_SHARED1_PLL 2
-#define CLK_FOUT_MMC_PLL 3
-#define CLK_MOUT_SHARED0_PLL 4
-#define CLK_MOUT_SHARED1_PLL 5
-#define CLK_MOUT_MMC_PLL 6
-#define CLK_MOUT_CORE_BUS 7
-#define CLK_MOUT_CORE_CCI 8
-#define CLK_MOUT_CORE_MMC_EMBD 9
-#define CLK_MOUT_CORE_SSS 10
-#define CLK_MOUT_DPU 11
-#define CLK_MOUT_HSI_BUS 12
-#define CLK_MOUT_HSI_MMC_CARD 13
-#define CLK_MOUT_HSI_USB20DRD 14
-#define CLK_MOUT_PERI_BUS 15
-#define CLK_MOUT_PERI_UART 16
-#define CLK_MOUT_PERI_IP 17
-#define CLK_DOUT_SHARED0_DIV3 18
-#define CLK_DOUT_SHARED0_DIV2 19
-#define CLK_DOUT_SHARED1_DIV3 20
-#define CLK_DOUT_SHARED1_DIV2 21
-#define CLK_DOUT_SHARED0_DIV4 22
-#define CLK_DOUT_SHARED1_DIV4 23
-#define CLK_DOUT_CORE_BUS 24
-#define CLK_DOUT_CORE_CCI 25
-#define CLK_DOUT_CORE_MMC_EMBD 26
-#define CLK_DOUT_CORE_SSS 27
-#define CLK_DOUT_DPU 28
-#define CLK_DOUT_HSI_BUS 29
-#define CLK_DOUT_HSI_MMC_CARD 30
-#define CLK_DOUT_HSI_USB20DRD 31
-#define CLK_DOUT_PERI_BUS 32
-#define CLK_DOUT_PERI_UART 33
-#define CLK_DOUT_PERI_IP 34
-#define CLK_GOUT_CORE_BUS 35
-#define CLK_GOUT_CORE_CCI 36
-#define CLK_GOUT_CORE_MMC_EMBD 37
-#define CLK_GOUT_CORE_SSS 38
-#define CLK_GOUT_DPU 39
-#define CLK_GOUT_HSI_BUS 40
-#define CLK_GOUT_HSI_MMC_CARD 41
-#define CLK_GOUT_HSI_USB20DRD 42
-#define CLK_GOUT_PERI_BUS 43
-#define CLK_GOUT_PERI_UART 44
-#define CLK_GOUT_PERI_IP 45
-#define CLK_MOUT_CLKCMU_APM_BUS 46
-#define CLK_DOUT_CLKCMU_APM_BUS 47
-#define CLK_GOUT_CLKCMU_APM_BUS 48
-#define CLK_MOUT_AUD 49
-#define CLK_GOUT_AUD 50
-#define CLK_DOUT_AUD 51
-#define CLK_MOUT_IS_BUS 52
-#define CLK_MOUT_IS_ITP 53
-#define CLK_MOUT_IS_VRA 54
-#define CLK_MOUT_IS_GDC 55
-#define CLK_GOUT_IS_BUS 56
-#define CLK_GOUT_IS_ITP 57
-#define CLK_GOUT_IS_VRA 58
-#define CLK_GOUT_IS_GDC 59
-#define CLK_DOUT_IS_BUS 60
-#define CLK_DOUT_IS_ITP 61
-#define CLK_DOUT_IS_VRA 62
-#define CLK_DOUT_IS_GDC 63
-#define CLK_MOUT_MFCMSCL_MFC 64
-#define CLK_MOUT_MFCMSCL_M2M 65
-#define CLK_MOUT_MFCMSCL_MCSC 66
-#define CLK_MOUT_MFCMSCL_JPEG 67
-#define CLK_GOUT_MFCMSCL_MFC 68
-#define CLK_GOUT_MFCMSCL_M2M 69
-#define CLK_GOUT_MFCMSCL_MCSC 70
-#define CLK_GOUT_MFCMSCL_JPEG 71
-#define CLK_DOUT_MFCMSCL_MFC 72
-#define CLK_DOUT_MFCMSCL_M2M 73
-#define CLK_DOUT_MFCMSCL_MCSC 74
-#define CLK_DOUT_MFCMSCL_JPEG 75
-#define CLK_MOUT_G3D_SWITCH 76
-#define CLK_GOUT_G3D_SWITCH 77
-#define CLK_DOUT_G3D_SWITCH 78
-
-/* CMU_APM */
-#define CLK_RCO_I3C_PMIC 1
-#define OSCCLK_RCO_APM 2
-#define CLK_RCO_APM__ALV 3
-#define CLK_DLL_DCO 4
-#define CLK_MOUT_APM_BUS_USER 5
-#define CLK_MOUT_RCO_APM_I3C_USER 6
-#define CLK_MOUT_RCO_APM_USER 7
-#define CLK_MOUT_DLL_USER 8
-#define CLK_MOUT_CLKCMU_CHUB_BUS 9
-#define CLK_MOUT_APM_BUS 10
-#define CLK_MOUT_APM_I3C 11
-#define CLK_DOUT_CLKCMU_CHUB_BUS 12
-#define CLK_DOUT_APM_BUS 13
-#define CLK_DOUT_APM_I3C 14
-#define CLK_GOUT_CLKCMU_CMGP_BUS 15
-#define CLK_GOUT_CLKCMU_CHUB_BUS 16
-#define CLK_GOUT_RTC_PCLK 17
-#define CLK_GOUT_TOP_RTC_PCLK 18
-#define CLK_GOUT_I3C_PCLK 19
-#define CLK_GOUT_I3C_SCLK 20
-#define CLK_GOUT_SPEEDY_PCLK 21
-#define CLK_GOUT_GPIO_ALIVE_PCLK 22
-#define CLK_GOUT_PMU_ALIVE_PCLK 23
-#define CLK_GOUT_SYSREG_APM_PCLK 24
-
-/* CMU_AUD */
-#define CLK_DOUT_AUD_AUDIF 1
-#define CLK_DOUT_AUD_BUSD 2
-#define CLK_DOUT_AUD_BUSP 3
-#define CLK_DOUT_AUD_CNT 4
-#define CLK_DOUT_AUD_CPU 5
-#define CLK_DOUT_AUD_CPU_ACLK 6
-#define CLK_DOUT_AUD_CPU_PCLKDBG 7
-#define CLK_DOUT_AUD_FM 8
-#define CLK_DOUT_AUD_FM_SPDY 9
-#define CLK_DOUT_AUD_MCLK 10
-#define CLK_DOUT_AUD_UAIF0 11
-#define CLK_DOUT_AUD_UAIF1 12
-#define CLK_DOUT_AUD_UAIF2 13
-#define CLK_DOUT_AUD_UAIF3 14
-#define CLK_DOUT_AUD_UAIF4 15
-#define CLK_DOUT_AUD_UAIF5 16
-#define CLK_DOUT_AUD_UAIF6 17
-#define CLK_FOUT_AUD_PLL 18
-#define CLK_GOUT_AUD_ABOX_ACLK 19
-#define CLK_GOUT_AUD_ASB_CCLK 20
-#define CLK_GOUT_AUD_CA32_CCLK 21
-#define CLK_GOUT_AUD_CNT_BCLK 22
-#define CLK_GOUT_AUD_CODEC_MCLK 23
-#define CLK_GOUT_AUD_DAP_CCLK 24
-#define CLK_GOUT_AUD_GPIO_PCLK 25
-#define CLK_GOUT_AUD_PPMU_ACLK 26
-#define CLK_GOUT_AUD_PPMU_PCLK 27
-#define CLK_GOUT_AUD_SPDY_BCLK 28
-#define CLK_GOUT_AUD_SYSMMU_CLK 29
-#define CLK_GOUT_AUD_SYSREG_PCLK 30
-#define CLK_GOUT_AUD_TZPC_PCLK 31
-#define CLK_GOUT_AUD_UAIF0_BCLK 32
-#define CLK_GOUT_AUD_UAIF1_BCLK 33
-#define CLK_GOUT_AUD_UAIF2_BCLK 34
-#define CLK_GOUT_AUD_UAIF3_BCLK 35
-#define CLK_GOUT_AUD_UAIF4_BCLK 36
-#define CLK_GOUT_AUD_UAIF5_BCLK 37
-#define CLK_GOUT_AUD_UAIF6_BCLK 38
-#define CLK_GOUT_AUD_WDT_PCLK 39
-#define CLK_MOUT_AUD_CPU 40
-#define CLK_MOUT_AUD_CPU_HCH 41
-#define CLK_MOUT_AUD_CPU_USER 42
-#define CLK_MOUT_AUD_FM 43
-#define CLK_MOUT_AUD_PLL 44
-#define CLK_MOUT_AUD_TICK_USB_USER 45
-#define CLK_MOUT_AUD_UAIF0 46
-#define CLK_MOUT_AUD_UAIF1 47
-#define CLK_MOUT_AUD_UAIF2 48
-#define CLK_MOUT_AUD_UAIF3 49
-#define CLK_MOUT_AUD_UAIF4 50
-#define CLK_MOUT_AUD_UAIF5 51
-#define CLK_MOUT_AUD_UAIF6 52
-#define IOCLK_AUDIOCDCLK0 53
-#define IOCLK_AUDIOCDCLK1 54
-#define IOCLK_AUDIOCDCLK2 55
-#define IOCLK_AUDIOCDCLK3 56
-#define IOCLK_AUDIOCDCLK4 57
-#define IOCLK_AUDIOCDCLK5 58
-#define IOCLK_AUDIOCDCLK6 59
-#define TICK_USB 60
-#define CLK_GOUT_AUD_CMU_AUD_PCLK 61
-
-/* CMU_CMGP */
-#define CLK_RCO_CMGP 1
-#define CLK_MOUT_CMGP_ADC 2
-#define CLK_MOUT_CMGP_USI0 3
-#define CLK_MOUT_CMGP_USI1 4
-#define CLK_DOUT_CMGP_ADC 5
-#define CLK_DOUT_CMGP_USI0 6
-#define CLK_DOUT_CMGP_USI1 7
-#define CLK_GOUT_CMGP_ADC_S0_PCLK 8
-#define CLK_GOUT_CMGP_ADC_S1_PCLK 9
-#define CLK_GOUT_CMGP_GPIO_PCLK 10
-#define CLK_GOUT_CMGP_USI0_IPCLK 11
-#define CLK_GOUT_CMGP_USI0_PCLK 12
-#define CLK_GOUT_CMGP_USI1_IPCLK 13
-#define CLK_GOUT_CMGP_USI1_PCLK 14
-#define CLK_GOUT_SYSREG_CMGP_PCLK 15
-
-/* CMU_G3D */
-#define CLK_FOUT_G3D_PLL 1
-#define CLK_MOUT_G3D_PLL 2
-#define CLK_MOUT_G3D_SWITCH_USER 3
-#define CLK_MOUT_G3D_BUSD 4
-#define CLK_DOUT_G3D_BUSP 5
-#define CLK_GOUT_G3D_CMU_G3D_PCLK 6
-#define CLK_GOUT_G3D_GPU_CLK 7
-#define CLK_GOUT_G3D_TZPC_PCLK 8
-#define CLK_GOUT_G3D_GRAY2BIN_CLK 9
-#define CLK_GOUT_G3D_BUSD_CLK 10
-#define CLK_GOUT_G3D_BUSP_CLK 11
-#define CLK_GOUT_G3D_SYSREG_PCLK 12
-
-/* CMU_HSI */
-#define CLK_MOUT_HSI_BUS_USER 1
-#define CLK_MOUT_HSI_MMC_CARD_USER 2
-#define CLK_MOUT_HSI_USB20DRD_USER 3
-#define CLK_MOUT_HSI_RTC 4
-#define CLK_GOUT_USB_RTC_CLK 5
-#define CLK_GOUT_USB_REF_CLK 6
-#define CLK_GOUT_USB_PHY_REF_CLK 7
-#define CLK_GOUT_USB_PHY_ACLK 8
-#define CLK_GOUT_USB_BUS_EARLY_CLK 9
-#define CLK_GOUT_GPIO_HSI_PCLK 10
-#define CLK_GOUT_MMC_CARD_ACLK 11
-#define CLK_GOUT_MMC_CARD_SDCLKIN 12
-#define CLK_GOUT_SYSREG_HSI_PCLK 13
-#define CLK_GOUT_HSI_PPMU_ACLK 14
-#define CLK_GOUT_HSI_PPMU_PCLK 15
-#define CLK_GOUT_HSI_CMU_HSI_PCLK 16
-
-/* CMU_IS */
-#define CLK_MOUT_IS_BUS_USER 1
-#define CLK_MOUT_IS_ITP_USER 2
-#define CLK_MOUT_IS_VRA_USER 3
-#define CLK_MOUT_IS_GDC_USER 4
-#define CLK_DOUT_IS_BUSP 5
-#define CLK_GOUT_IS_CMU_IS_PCLK 6
-#define CLK_GOUT_IS_CSIS0_ACLK 7
-#define CLK_GOUT_IS_CSIS1_ACLK 8
-#define CLK_GOUT_IS_CSIS2_ACLK 9
-#define CLK_GOUT_IS_TZPC_PCLK 10
-#define CLK_GOUT_IS_CSIS_DMA_CLK 11
-#define CLK_GOUT_IS_GDC_CLK 12
-#define CLK_GOUT_IS_IPP_CLK 13
-#define CLK_GOUT_IS_ITP_CLK 14
-#define CLK_GOUT_IS_MCSC_CLK 15
-#define CLK_GOUT_IS_VRA_CLK 16
-#define CLK_GOUT_IS_PPMU_IS0_ACLK 17
-#define CLK_GOUT_IS_PPMU_IS0_PCLK 18
-#define CLK_GOUT_IS_PPMU_IS1_ACLK 19
-#define CLK_GOUT_IS_PPMU_IS1_PCLK 20
-#define CLK_GOUT_IS_SYSMMU_IS0_CLK 21
-#define CLK_GOUT_IS_SYSMMU_IS1_CLK 22
-#define CLK_GOUT_IS_SYSREG_PCLK 23
-
-/* CMU_MFCMSCL */
-#define CLK_MOUT_MFCMSCL_MFC_USER 1
-#define CLK_MOUT_MFCMSCL_M2M_USER 2
-#define CLK_MOUT_MFCMSCL_MCSC_USER 3
-#define CLK_MOUT_MFCMSCL_JPEG_USER 4
-#define CLK_DOUT_MFCMSCL_BUSP 5
-#define CLK_GOUT_MFCMSCL_CMU_MFCMSCL_PCLK 6
-#define CLK_GOUT_MFCMSCL_TZPC_PCLK 7
-#define CLK_GOUT_MFCMSCL_JPEG_ACLK 8
-#define CLK_GOUT_MFCMSCL_M2M_ACLK 9
-#define CLK_GOUT_MFCMSCL_MCSC_CLK 10
-#define CLK_GOUT_MFCMSCL_MFC_ACLK 11
-#define CLK_GOUT_MFCMSCL_PPMU_ACLK 12
-#define CLK_GOUT_MFCMSCL_PPMU_PCLK 13
-#define CLK_GOUT_MFCMSCL_SYSMMU_CLK 14
-#define CLK_GOUT_MFCMSCL_SYSREG_PCLK 15
-
-/* CMU_PERI */
-#define CLK_MOUT_PERI_BUS_USER 1
-#define CLK_MOUT_PERI_UART_USER 2
-#define CLK_MOUT_PERI_HSI2C_USER 3
-#define CLK_MOUT_PERI_SPI_USER 4
-#define CLK_DOUT_PERI_HSI2C0 5
-#define CLK_DOUT_PERI_HSI2C1 6
-#define CLK_DOUT_PERI_HSI2C2 7
-#define CLK_DOUT_PERI_SPI0 8
-#define CLK_GOUT_PERI_HSI2C0 9
-#define CLK_GOUT_PERI_HSI2C1 10
-#define CLK_GOUT_PERI_HSI2C2 11
-#define CLK_GOUT_GPIO_PERI_PCLK 12
-#define CLK_GOUT_HSI2C0_IPCLK 13
-#define CLK_GOUT_HSI2C0_PCLK 14
-#define CLK_GOUT_HSI2C1_IPCLK 15
-#define CLK_GOUT_HSI2C1_PCLK 16
-#define CLK_GOUT_HSI2C2_IPCLK 17
-#define CLK_GOUT_HSI2C2_PCLK 18
-#define CLK_GOUT_I2C0_PCLK 19
-#define CLK_GOUT_I2C1_PCLK 20
-#define CLK_GOUT_I2C2_PCLK 21
-#define CLK_GOUT_I2C3_PCLK 22
-#define CLK_GOUT_I2C4_PCLK 23
-#define CLK_GOUT_I2C5_PCLK 24
-#define CLK_GOUT_I2C6_PCLK 25
-#define CLK_GOUT_MCT_PCLK 26
-#define CLK_GOUT_PWM_MOTOR_PCLK 27
-#define CLK_GOUT_SPI0_IPCLK 28
-#define CLK_GOUT_SPI0_PCLK 29
-#define CLK_GOUT_SYSREG_PERI_PCLK 30
-#define CLK_GOUT_UART_IPCLK 31
-#define CLK_GOUT_UART_PCLK 32
-#define CLK_GOUT_WDT0_PCLK 33
-#define CLK_GOUT_WDT1_PCLK 34
-
-/* CMU_CORE */
-#define CLK_MOUT_CORE_BUS_USER 1
-#define CLK_MOUT_CORE_CCI_USER 2
-#define CLK_MOUT_CORE_MMC_EMBD_USER 3
-#define CLK_MOUT_CORE_SSS_USER 4
-#define CLK_MOUT_CORE_GIC 5
-#define CLK_DOUT_CORE_BUSP 6
-#define CLK_GOUT_CCI_ACLK 7
-#define CLK_GOUT_GIC_CLK 8
-#define CLK_GOUT_MMC_EMBD_ACLK 9
-#define CLK_GOUT_MMC_EMBD_SDCLKIN 10
-#define CLK_GOUT_SSS_ACLK 11
-#define CLK_GOUT_SSS_PCLK 12
-#define CLK_GOUT_GPIO_CORE_PCLK 13
-#define CLK_GOUT_SYSREG_CORE_PCLK 14
-
-/* CMU_DPU */
-#define CLK_MOUT_DPU_USER 1
-#define CLK_DOUT_DPU_BUSP 2
-#define CLK_GOUT_DPU_CMU_DPU_PCLK 3
-#define CLK_GOUT_DPU_DECON0_ACLK 4
-#define CLK_GOUT_DPU_DMA_ACLK 5
-#define CLK_GOUT_DPU_DPP_ACLK 6
-#define CLK_GOUT_DPU_PPMU_ACLK 7
-#define CLK_GOUT_DPU_PPMU_PCLK 8
-#define CLK_GOUT_DPU_SMMU_CLK 9
-#define CLK_GOUT_DPU_SYSREG_PCLK 10
-#define DPU_NR_CLK 11
-
-#endif /* _DT_BINDINGS_CLOCK_EXYNOS_850_H */
diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h
deleted file mode 100644
index a01af16..0000000
--- a/include/dt-bindings/soc/samsung,exynos-usi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (c) 2021 Linaro Ltd.
- * Author: Sam Protsenko <semen.protsenko@linaro.org>
- *
- * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface).
- */
-
-#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
-#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
-
-#define USI_V2_NONE 0
-#define USI_V2_UART 1
-#define USI_V2_SPI 2
-#define USI_V2_I2C 3
-
-#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */