board: freescale: ls1088a: remove code under !CONFIG_DM_ETH

Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
index 8fe643f..f62f5fd 100644
--- a/board/freescale/ls1088a/eth_ls1088aqds.c
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -3,742 +3,9 @@
  * Copyright 2017 NXP
  */
 
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <log.h>
-#include <net.h>
-#include <netdev.h>
 #include <asm/io.h>
 #include <asm/arch/fsl_serdes.h>
-#include <hwconfig.h>
-#include <fsl_mdio.h>
-#include <malloc.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <i2c.h>
-#include <miiphy.h>
 #include <fsl-mc/fsl_mc.h>
-#include <fsl-mc/ldpaa_wriop.h>
-#include <linux/delay.h>
-
-#include "../common/qixis.h"
-
-#include "ls1088a_qixis.h"
-
-#ifndef CONFIG_DM_ETH
-#ifdef CONFIG_FSL_MC_ENET
-
-#define SFP_TX		0
-
- /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
- *   Bank 1 -> Lanes A, B, C, D,
- *   Bank 2 -> Lanes A,B, C, D,
- */
-
- /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
-  * means that the mapping must be determined dynamically, or that the lane
-  * maps to something other than a board slot.
-  */
-
-static u8 lane_to_slot_fsm1[] = {
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
- * housed.
- */
-
-static int xqsgii_riser_phy_addr[] = {
-	XQSGMII_CARD_PHY1_PORT0_ADDR,
-	XQSGMII_CARD_PHY2_PORT0_ADDR,
-	XQSGMII_CARD_PHY3_PORT0_ADDR,
-	XQSGMII_CARD_PHY4_PORT0_ADDR,
-	XQSGMII_CARD_PHY3_PORT2_ADDR,
-	XQSGMII_CARD_PHY1_PORT2_ADDR,
-	XQSGMII_CARD_PHY4_PORT2_ADDR,
-	XQSGMII_CARD_PHY2_PORT2_ADDR,
-};
-
-static int sgmii_riser_phy_addr[] = {
-	SGMII_CARD_PORT1_PHY_ADDR,
-	SGMII_CARD_PORT2_PHY_ADDR,
-	SGMII_CARD_PORT3_PHY_ADDR,
-	SGMII_CARD_PORT4_PHY_ADDR,
-};
-
-/* Slot2 does not have EMI connections */
-#define EMI_NONE	0xFF
-#define EMI1_RGMII1	0
-#define EMI1_RGMII2	1
-#define EMI1_SLOT1	2
-
-static const char * const mdio_names[] = {
-	"LS1088A_QDS_MDIO0",
-	"LS1088A_QDS_MDIO1",
-	"LS1088A_QDS_MDIO2",
-	DEFAULT_WRIOP_MDIO2_NAME,
-};
-
-struct ls1088a_qds_mdio {
-	u8 muxval;
-	struct mii_dev *realbus;
-};
-
-struct reg_pair {
-	uint addr;
-	u8 *val;
-};
-
-static void sgmii_configure_repeater(int dpmac)
-{
-	struct mii_dev *bus;
-	uint8_t a = 0xf;
-	int i, j, k, ret;
-	unsigned short value;
-	const char *dev = "LS1088A_QDS_MDIO2";
-	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
-	int i2c_phy_addr = 0;
-	int phy_addr = 0;
-
-	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
-	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
-	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-
-	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
-	struct reg_pair reg_pair[10] = {
-		{6, &reg_val[0]}, {4, &reg_val[1]},
-		{8, &reg_val[2]}, {0xf, NULL},
-		{0x11, NULL}, {0x16, NULL},
-		{0x18, NULL}, {0x23, &reg_val[3]},
-		{0x2d, &reg_val[4]}, {4, &reg_val[5]},
-	};
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *udev;
-#endif
-
-	/* Set I2c to Slot 1 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_write(0x77, 0, 0, &a, 1);
-#else
-	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
-	if (!ret)
-		ret = dm_i2c_write(udev, 0, &a, 1);
-#endif
-	if (ret)
-		goto error;
-
-	switch (dpmac) {
-	case 1:
-		i2c_phy_addr = i2c_addr[1];
-		phy_addr = 4;
-		break;
-	case 2:
-		i2c_phy_addr = i2c_addr[0];
-		phy_addr = 0;
-		break;
-	case 3:
-		i2c_phy_addr = i2c_addr[3];
-		phy_addr = 0xc;
-		break;
-	case 7:
-		i2c_phy_addr = i2c_addr[2];
-		phy_addr = 8;
-		break;
-	}
-
-	/* Check the PHY status */
-	ret = miiphy_set_current_dev(dev);
-	if (ret > 0)
-		goto error;
-
-	bus = mdio_get_current_dev();
-	debug("Reading from bus %s\n", bus->name);
-
-	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
-	if (ret > 0)
-		goto error;
-
-	mdelay(10);
-	ret = miiphy_read(dev, phy_addr, 0x11, &value);
-	if (ret > 0)
-			goto error;
-
-	mdelay(10);
-
-	if ((value & 0xfff) == 0x401) {
-		miiphy_write(dev, phy_addr, 0x1f, 0);
-		printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
-		return;
-	}
-
-#if CONFIG_IS_ENABLED(DM_I2C)
-	i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
-#endif
-
-	for (i = 0; i < 4; i++) {
-		for (j = 0; j < 4; j++) {
-			reg_pair[3].val = &ch_a_eq[i];
-			reg_pair[4].val = &ch_a_ctl2[j];
-			reg_pair[5].val = &ch_b_eq[i];
-			reg_pair[6].val = &ch_b_ctl2[j];
-			for (k = 0; k < 10; k++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
-				ret = i2c_write(i2c_phy_addr,
-						reg_pair[k].addr,
-						1, reg_pair[k].val, 1);
-#else
-				ret = i2c_get_chip_for_busnum(0,
-							      i2c_phy_addr,
-							      1, &udev);
-				if (!ret)
-					ret = dm_i2c_write(udev,
-							   reg_pair[k].addr,
-							   reg_pair[k].val, 1);
-#endif
-				if (ret)
-					goto error;
-			}
-
-			mdelay(100);
-			ret = miiphy_read(dev, phy_addr, 0x11, &value);
-			if (ret > 0)
-				goto error;
-
-			mdelay(100);
-			ret = miiphy_read(dev, phy_addr, 0x11, &value);
-			if (ret > 0)
-				goto error;
-
-			if ((value & 0xfff) == 0x401) {
-				printf("DPMAC %d :PHY is configured ",
-				       dpmac);
-				printf("after setting repeater 0x%x\n",
-				       value);
-				i = 5;
-				j = 5;
-			} else {
-				printf("DPMAC %d :PHY is failed to ",
-				       dpmac);
-				printf("configure the repeater 0x%x\n", value);
-			}
-		}
-	}
-	miiphy_write(dev, phy_addr, 0x1f, 0);
-error:
-	if (ret)
-		printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
-	return;
-}
-
-static void qsgmii_configure_repeater(int dpmac)
-{
-	uint8_t a = 0xf;
-	int i, j, k;
-	int i2c_phy_addr = 0;
-	int phy_addr = 0;
-	int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
-
-	uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
-	uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-	uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
-	uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-
-	u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
-	struct reg_pair reg_pair[10] = {
-		{6, &reg_val[0]}, {4, &reg_val[1]},
-		{8, &reg_val[2]}, {0xf, NULL},
-		{0x11, NULL}, {0x16, NULL},
-		{0x18, NULL}, {0x23, &reg_val[3]},
-		{0x2d, &reg_val[4]}, {4, &reg_val[5]},
-	};
-
-	const char *dev = mdio_names[EMI1_SLOT1];
-	int ret = 0;
-	unsigned short value;
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *udev;
-#endif
-
-	/* Set I2c to Slot 1 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_write(0x77, 0, 0, &a, 1);
-#else
-	ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
-	if (!ret)
-		ret = dm_i2c_write(udev, 0, &a, 1);
-#endif
-	if (ret)
-		goto error;
-
-	switch (dpmac) {
-	case 7:
-	case 8:
-	case 9:
-	case 10:
-		i2c_phy_addr = i2c_addr[2];
-		phy_addr = 8;
-		break;
-
-	case 3:
-	case 4:
-	case 5:
-	case 6:
-		i2c_phy_addr = i2c_addr[3];
-		phy_addr = 0xc;
-		break;
-	}
-
-	/* Check the PHY status */
-	ret = miiphy_set_current_dev(dev);
-	ret = miiphy_write(dev, phy_addr, 0x1f, 3);
-	mdelay(10);
-	ret = miiphy_read(dev, phy_addr, 0x11, &value);
-	mdelay(10);
-	ret = miiphy_read(dev, phy_addr, 0x11, &value);
-	mdelay(10);
-	if ((value & 0xf) == 0xf) {
-		miiphy_write(dev, phy_addr, 0x1f, 0);
-		printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
-		return;
-	}
-
-#if CONFIG_IS_ENABLED(DM_I2C)
-	i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
-#endif
-
-	for (i = 0; i < 4; i++) {
-		for (j = 0; j < 4; j++) {
-			reg_pair[3].val = &ch_a_eq[i];
-			reg_pair[4].val = &ch_a_ctl2[j];
-			reg_pair[5].val = &ch_b_eq[i];
-			reg_pair[6].val = &ch_b_ctl2[j];
-
-			for (k = 0; k < 10; k++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
-				ret = i2c_write(i2c_phy_addr,
-						reg_pair[k].addr,
-						1, reg_pair[k].val, 1);
-#else
-				ret = i2c_get_chip_for_busnum(0,
-							      i2c_addr[dpmac],
-							      1, &udev);
-				if (!ret)
-					ret = dm_i2c_write(udev,
-							   reg_pair[k].addr,
-							   reg_pair[k].val, 1);
-#endif
-				if (ret)
-					goto error;
-			}
-
-			ret = miiphy_read(dev, phy_addr, 0x11, &value);
-			if (ret > 0)
-				goto error;
-			mdelay(1);
-			ret = miiphy_read(dev, phy_addr, 0x11, &value);
-			if (ret > 0)
-				goto error;
-			mdelay(10);
-			if ((value & 0xf) == 0xf) {
-				miiphy_write(dev, phy_addr, 0x1f, 0);
-				printf("DPMAC %d :PHY is ..... Configured\n",
-				       dpmac);
-				return;
-			}
-		}
-	}
-error:
-	printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
-	return;
-}
-
-static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
-{
-	return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u8 muxval)
-{
-	struct mii_dev *bus;
-	const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
-
-	if (!name) {
-		printf("No bus for muxval %x\n", muxval);
-		return NULL;
-	}
-
-	bus = miiphy_get_dev_by_name(name);
-
-	if (!bus) {
-		printf("No bus by name %s\n", name);
-		return NULL;
-	}
-
-	return bus;
-}
-
-static void ls1088a_qds_enable_SFP_TX(u8 muxval)
-{
-	u8 brdcfg9;
-
-	brdcfg9 = QIXIS_READ(brdcfg[9]);
-	brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
-	brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
-	QIXIS_WRITE(brdcfg[9], brdcfg9);
-}
-
-static void ls1088a_qds_mux_mdio(u8 muxval)
-{
-	u8 brdcfg4;
-
-	if (muxval <= 5) {
-		brdcfg4 = QIXIS_READ(brdcfg[4]);
-		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
-		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
-		QIXIS_WRITE(brdcfg[4], brdcfg4);
-	}
-}
-
-static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
-				 int devad, int regnum)
-{
-	struct ls1088a_qds_mdio *priv = bus->priv;
-
-	ls1088a_qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
-				  int regnum, u16 value)
-{
-	struct ls1088a_qds_mdio *priv = bus->priv;
-
-	ls1088a_qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
-{
-	struct ls1088a_qds_mdio *priv = bus->priv;
-
-	return priv->realbus->reset(priv->realbus);
-}
-
-static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
-{
-	struct ls1088a_qds_mdio *pmdio;
-	struct mii_dev *bus = mdio_alloc();
-
-	if (!bus) {
-		printf("Failed to allocate ls1088a_qds MDIO bus\n");
-		return -1;
-	}
-
-	pmdio = malloc(sizeof(*pmdio));
-	if (!pmdio) {
-		printf("Failed to allocate ls1088a_qds private data\n");
-		free(bus);
-		return -1;
-	}
-
-	bus->read = ls1088a_qds_mdio_read;
-	bus->write = ls1088a_qds_mdio_write;
-	bus->reset = ls1088a_qds_mdio_reset;
-	sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
-
-	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
-	if (!pmdio->realbus) {
-		printf("No bus with name %s\n", realbusname);
-		free(bus);
-		free(pmdio);
-		return -1;
-	}
-
-	pmdio->muxval = muxval;
-	bus->priv = pmdio;
-
-	return mdio_register(bus);
-}
-
-/*
- * Initialize the dpmac_info array.
- *
- */
-static void initialize_dpmac_to_slot(void)
-{
-	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
-	u32 serdes1_prtcl, cfg;
-
-	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
-				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
-	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
-	switch (serdes1_prtcl) {
-	case 0x12:
-		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
-		break;
-	case 0x15:
-	case 0x1D:
-		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[2] = EMI_NONE;
-		lane_to_slot_fsm1[3] = EMI_NONE;
-		break;
-	case 0x1E:
-		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[3] = EMI_NONE;
-		break;
-	case 0x3A:
-		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[1] = EMI_NONE;
-		lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
-		lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
-		break;
-
-	default:
-		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
-		       __func__, serdes1_prtcl);
-		break;
-	}
-}
-
-void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
-{
-	struct mii_dev *bus;
-	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
-	u32 serdes1_prtcl, cfg;
-
-	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
-				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
-	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
-	int *riser_phy_addr;
-	char *env_hwconfig = env_get("hwconfig");
-
-	if (hwconfig_f("xqsgmii", env_hwconfig))
-		riser_phy_addr = &xqsgii_riser_phy_addr[0];
-	else
-		riser_phy_addr = &sgmii_riser_phy_addr[0];
-
-	switch (serdes1_prtcl) {
-	case 0x12:
-	case 0x15:
-	case 0x1E:
-	case 0x3A:
-		switch (dpmac_id) {
-		case 1:
-			wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]);
-			break;
-		case 2:
-			wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]);
-			break;
-		case 3:
-			wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]);
-			break;
-		case 7:
-			wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]);
-			break;
-		default:
-			printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
-			break;
-		}
-		break;
-	default:
-		printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
-		       __func__, serdes1_prtcl);
-		return;
-	}
-	dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
-	bus = mii_dev_for_muxval(EMI1_SLOT1);
-	wriop_set_mdio(dpmac_id, bus);
-}
-
-void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
-{
-	struct mii_dev *bus;
-	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
-	u32 serdes1_prtcl, cfg;
-
-	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
-				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
-	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
-	switch (serdes1_prtcl) {
-	case 0x1D:
-	case 0x1E:
-		switch (dpmac_id) {
-		case 3:
-		case 4:
-		case 5:
-		case 6:
-			wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9);
-			break;
-		case 7:
-		case 8:
-		case 9:
-		case 10:
-			wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1);
-			break;
-		}
-
-		dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
-		bus = mii_dev_for_muxval(EMI1_SLOT1);
-		wriop_set_mdio(dpmac_id, bus);
-		break;
-	default:
-		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		break;
-	}
-}
-
-void ls1088a_handle_phy_interface_xsgmii(int i)
-{
-	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
-	u32 serdes1_prtcl, cfg;
-
-	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
-				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
-	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
-	switch (serdes1_prtcl) {
-	case 0x15:
-	case 0x1D:
-	case 0x1E:
-		wriop_set_phy_address(i, 0, i + 26);
-		ls1088a_qds_enable_SFP_TX(SFP_TX);
-		break;
-	default:
-		printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		break;
-	}
-}
-
-static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
-{
-	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
-	u32 serdes1_prtcl, cfg;
-	struct mii_dev *bus;
-
-	cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
-				FSL_CHASSIS3_SRDS1_PRTCL_MASK;
-	cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-	serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
-	switch (dpmac_id) {
-	case 4:
-		wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR);
-		dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
-		bus = mii_dev_for_muxval(EMI1_RGMII1);
-		wriop_set_mdio(dpmac_id, bus);
-		break;
-	case 5:
-		wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR);
-		dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
-		bus = mii_dev_for_muxval(EMI1_RGMII2);
-		wriop_set_mdio(dpmac_id, bus);
-		break;
-	default:
-		printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
-		       serdes1_prtcl);
-		break;
-	}
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
-	int error = 0, i;
-#ifdef CONFIG_FSL_MC_ENET
-	struct memac_mdio_info *memac_mdio0_info;
-	char *env_hwconfig = env_get("hwconfig");
-
-	initialize_dpmac_to_slot();
-
-	memac_mdio0_info = (struct memac_mdio_info *)malloc(
-					sizeof(struct memac_mdio_info));
-	memac_mdio0_info->regs =
-		(struct memac_mdio_controller *)
-					CFG_SYS_FSL_WRIOP1_MDIO1;
-	memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
-
-	/* Register the real MDIO1 bus */
-	fm_memac_mdio_init(bis, memac_mdio0_info);
-	/* Register the muxing front-ends to the MDIO buses */
-	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
-	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
-	ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
-
-	for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
-		switch (wriop_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_RGMII:
-		case PHY_INTERFACE_MODE_RGMII_ID:
-			ls1088a_handle_phy_interface_rgmii(i);
-			break;
-		case PHY_INTERFACE_MODE_QSGMII:
-			ls1088a_handle_phy_interface_qsgmii(i);
-			break;
-		case PHY_INTERFACE_MODE_SGMII:
-			ls1088a_handle_phy_interface_sgmii(i);
-			break;
-		case PHY_INTERFACE_MODE_XGMII:
-			ls1088a_handle_phy_interface_xsgmii(i);
-			break;
-		default:
-			break;
-
-		if (i == 16)
-			i = NUM_WRIOP_PORTS;
-		}
-	}
-
-	error = cpu_eth_init(bis);
-
-	if (hwconfig_f("xqsgmii", env_hwconfig)) {
-		for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
-			switch (wriop_get_enet_if(i)) {
-			case PHY_INTERFACE_MODE_QSGMII:
-				qsgmii_configure_repeater(i);
-				break;
-			case PHY_INTERFACE_MODE_SGMII:
-				sgmii_configure_repeater(i);
-				break;
-			default:
-				break;
-			}
-
-			if (i == 16)
-				i = NUM_WRIOP_PORTS;
-		}
-	}
-#endif
-	error = pci_eth_init(bis);
-	return error;
-}
-#endif // !CONFIG_DM_ETH
 
 #if defined(CONFIG_RESET_PHY_R)
 void reset_phy(void)
@@ -747,10 +14,10 @@
 }
 #endif /* CONFIG_RESET_PHY_R */
 
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
+#if defined(CONFIG_MULTI_DTB_FIT)
 
-/* Structure to hold SERDES protocols supported in case of
- * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
+/* Structure to hold SERDES protocols supported (network interfaces are
+ * described in the DTS).
  *
  * @serdes_block: the index of the SERDES block
  * @serdes_protocol: the decimal value of the protocol supported