arm: mach-bcm283x: Add ARMV8_MULTIENTRY support
When ACPI is enabled over FDT the APs cannot be brought out of reset
by the OS using the "FDT spin-table" mechanism, as no FDT is provided
to the OS. The APs must be released out of reset in u-boot and then
brought up in an ACPI compliant fashion.
When ARMV8_MULTIENTRY is specified, the APs are released from reset
and will enter U-Boot after it has been relocated as well.
By default ARMV8_MULTIENTRY is not selected, keeping existing behaviour.
TEST: All APs enter U-Boot when run on qemu-system-aarch64 and on
real hardware.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
diff --git a/drivers/cpu/Makefile b/drivers/cpu/Makefile
index 7733956..eaf4947 100644
--- a/drivers/cpu/Makefile
+++ b/drivers/cpu/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_CPU) += cpu-uclass.o
-
+obj-$(CONFIG_ARCH_BCM283X) += bcm283x_cpu.o
obj-$(CONFIG_ARCH_BMIPS) += bmips_cpu.o
obj-$(CONFIG_ARCH_IMX8) += imx8_cpu.o
obj-$(CONFIG_ARCH_AT91) += at91_cpu.o