rockchip: Add basic support for evb-rk3036 board

This add some basic files required to allow the board to dispaly
serial message and can run command(mmc info etc)

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Moved board Kconfig fragment from previous patch into this one to fix
build error:
Signed-off-by: Simon Glass <sjg@chromium.org>

Series-changes: 8
- moved board Kconfig fragment from previous patch into this one
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 76d1faf..23e7b40 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -21,7 +21,8 @@
 	exynos5422-odroidxu3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-firefly.dtb \
-	rk3288-jerry.dtb
+	rk3288-jerry.dtb \
+	rk3036-sdk.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/dts/rk3036-sdk.dts b/arch/arm/dts/rk3036-sdk.dts
new file mode 100644
index 0000000..a83badb
--- /dev/null
+++ b/arch/arm/dts/rk3036-sdk.dts
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "SDK-RK3036";
+	compatible = "sdk,sdk-rk3036", "rockchip,rk3036";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	usb_control {
+		compatible = "rockchip,rk3036-usb-control";
+		host_drv_gpio = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		otg_drv_gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+        hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+
+	dr_mode = "host";
+};
diff --git a/arch/arm/mach-rockchip/rk3036/Kconfig b/arch/arm/mach-rockchip/rk3036/Kconfig
index d76d5e1..0fbc58e 100644
--- a/arch/arm/mach-rockchip/rk3036/Kconfig
+++ b/arch/arm/mach-rockchip/rk3036/Kconfig
@@ -1,3 +1,17 @@
 if ROCKCHIP_RK3036
 
+config TARGET_EVB_RK3036
+	bool "EVB_RK3036"
+
+config SYS_SOC
+	default "rockchip"
+
+config SYS_MALLOC_F_LEN
+	default 0x400
+
+config ROCKCHIP_COMMON
+	bool "Support rk common fuction"
+
+source "board/evb_rk3036/evb_rk3036/Kconfig"
+
 endif