microblaze: Add faked LL_TEMAC driver configuration
Expand the specific configuration for the microblaze-generic
board in xparameters.h with a faked setup to enable the
LL_TEMAC driver.
Note: From now the microblaze-generic board is no longer a
valid board configuration for a real piece of hardware. Rather
than, we use the file config.mk and xparameters.h as a faked
board configuration to force the compilation of all potential
driver code for Microblaze systems.
Signed-off-by: Stephan Linz <linz@li-pro.net>
diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index fae03bf..50a82d9 100644
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -21,8 +21,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+ * CAUTION: This file is a faked configuration !!!
+ * There is no real target for the microblaze-generic
+ * configuration. You have to replace this file with
+ * the generated file from your Xilinx design flow.
*/
#define XILINX_BOARD_NAME microblaze-generic
@@ -69,3 +71,9 @@
/* Ethernet controller is Ethernet_MAC */
#define XILINX_EMACLITE_BASEADDR 0x40C00000
+
+/* LL_TEMAC Ethernet controller */
+#define XILINX_LLTEMAC_BASEADDR 0x44000000
+#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR 0x42000180
+#define XILINX_LLTEMAC_BASEADDR1 0x44200000
+#define XILINX_LLTEMAC_FIFO_BASEADDR1 0x42100000