PXA: pxa-regs.h cleanup
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 68c39d2..df23076 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -28,6 +28,7 @@
#include <malloc.h>
#include <command.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -110,7 +111,7 @@
static void get_pressed_keys(uchar *s)
{
unsigned long val;
- val = GPLR3;
+ val = readl(GPLR3);
if(val & (1<<31))
*s++ = KEYBD_KP_DKIN0;
@@ -124,18 +125,18 @@
static void keys_init()
{
- CKENB |= CKENB_7_GPIO;
+ writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
udelay(100);
/* Configure GPIOs */
- GPIO127 = 0xa840; /* KP_DKIN0 */
- GPIO114 = 0xa840; /* KP_DKIN1 */
- GPIO125 = 0xa840; /* KP_DKIN2 */
- GPIO118 = 0xa840; /* KP_DKIN5 */
+ writel(0xa840, GPIO127); /* KP_DKIN0 */
+ writel(0xa840, GPIO114); /* KP_DKIN1 */
+ writel(0xa840, GPIO125); /* KP_DKIN2 */
+ writel(0xa840, GPIO118); /* KP_DKIN5 */
/* Configure GPIOs as inputs */
- GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
- GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
+ writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3);
+ writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3);
udelay(100);
}
@@ -283,11 +284,11 @@
void i2c_init_board()
{
- CKENB |= (CKENB_4_I2C);
+ writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
/* setup I2C GPIO's */
- GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
- GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
+ writel(0x801, GPIO32); /* SCL = Alt. Fkt. 1 */
+ writel(0x801, GPIO33); /* SDA = Alt. Fkt. 1 */
}
/* initialize the DA9030 Power Controller */
@@ -295,20 +296,20 @@
{
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
- CKENB |= CKENB_7_GPIO;
+ writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
udelay(100);
/* Rising Edge on EXTON to reset DA9030 */
- GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */
- GPDR0 |= (1<<17); /* GPIO17 is output */
- GSDR0 = (1<<17);
- GPCR0 = (1<<17); /* drive GPIO17 low */
- GPSR0 = (1<<17); /* drive GPIO17 high */
+ writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */
+ writel(readl(GPDR0) | (1<<17), GPDR0); /* GPIO17 is output */
+ writel((1<<17), GSDR0);
+ writel((1<<17), GPCR0); /* drive GPIO17 low */
+ writel((1<<17), GPSR0); /* drive GPIO17 high */
#if CONFIG_SYS_DA9030_EXTON_DELAY
udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY); /* wait for DA9030 */
#endif
- GPCR0 = (1<<17); /* drive GPIO17 low */
+ writel((1<<17), GPCR0); /* drive GPIO17 low */
/* reset the watchdog and go active (0xec) */
val = (SYS_CONTROL_A_HWRES_ENABLE |