MPC8xxx DDR: align informational prints
Add spaces to cause the informational prints to line up with
the ones from init_func_ram() in board.c. Output now looks like
this:
....
DRAM: Detected 4096 MB of memory
This U-Boot only supports < 4G of DDR
You could rebuild it with CONFIG_PHYS_64BIT
DDR: 2 GiB (DDR2, 64-bit, CL=5, ECC off)
....
The prints from lbc_sdram_init() have also been modified to line
line up and changed to start with "LBC SDRAM" instead of the
confusing "SDRAM".
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 6d582e9..e3888ff 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -469,8 +469,9 @@
/* Check for 4G or more. Bad. */
if (total_memory >= (1ull << 32)) {
printf("Detected %lld MB of memory\n", total_memory >> 20);
- printf("This U-Boot only supports < 4G of DDR\n");
- printf("You could rebuild it with CONFIG_PHYS_64BIT\n");
+ printf(" This U-Boot only supports < 4G of DDR\n");
+ printf(" You could rebuild it with CONFIG_PHYS_64BIT\n");
+ printf(" "); /* re-align to match init_func_ram print */
total_memory = CONFIG_MAX_MEM_MAPPED;
}
#endif
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 9eeb134..c75585e 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -127,8 +127,9 @@
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
- puts(" SDRAM: ");
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 3ee666f..0d3752d 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -301,9 +301,9 @@
uint cpu_board_rev;
uint lsdmr_common;
- puts(" SDRAM: ");
-
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 8ad6b22..2c45585 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -121,9 +121,9 @@
uint cpu_board_rev;
uint lsdmr_common;
- puts(" SDRAM: ");
-
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 02df6ae..60d1758 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -299,9 +299,9 @@
uint cpu_board_rev;
uint lsdmr_common;
- puts(" SDRAM: ");
-
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 26a64a3..1a165bf 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -332,8 +332,9 @@
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
- puts(" SDRAM: ");
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 07f8e51..a504f8a 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -180,9 +180,9 @@
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint lsdmr_common;
- puts(" SDRAM: ");
-
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n ");
/*
* Setup SDRAM Base and Option Registers