ARM: rmobile: Update M2-N Gose
The M2-N Gose port was broken since some time. This patch updates
the M2-N Gose port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/include/configs/gose.h b/include/configs/gose.h
index 3531621..af6189e 100644
--- a/include/configs/gose.h
+++ b/include/configs/gose.h
@@ -14,21 +14,15 @@
#include "rcar-gen2-common.h"
-/* STACK */
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
-#endif
-
-#define STACK_AREA_SIZE 0xC000
-#define LOW_LEVEL_MERAM_STACK \
- (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000
+#define STACK_AREA_SIZE 0x00100000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define RCAR_GEN2_SDRAM_BASE 0x40000000
-#define RCAR_GEN2_SDRAM_SIZE 0x40000000
-#define RCAR_GEN2_UBOOT_SDRAM_SIZE 0x20000000
+#define RCAR_GEN2_SDRAM_SIZE (1048u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512u * 1024 * 1024)
/* SCIF */
@@ -41,45 +35,29 @@
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
#define CONFIG_SH_ETHER_CACHE_WRITEBACK
#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_SYS_TMU_CLK_DIV 4
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
-#define CONFIG_SYS_I2C_SH_SPEED0 400000
-#define CONFIG_SYS_I2C_SH_SPEED1 400000
-#define CONFIG_SYS_I2C_SH_SPEED2 400000
-#define CONFIG_SH_I2C_DATA_HIGH 4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK 10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_SYS_TMU_CLK_DIV 4
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA 0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA 0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA 0x00000180
-/* SCIF0 */
-#define CONFIG_SMSTP7_ENA 0x00200000
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0"
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ 97500000
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE 0xe6300000
+#define CONFIG_SPL_STACK 0xe6340000
+#define CONFIG_SPL_MAX_SIZE 0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF0
+#define CONFIG_SH_SCIF_CLK_FREQ 65000000
+#endif
#endif /* __GOSE_H */