sunxi: video: Make pwm polarity configurable
It turns out that there are some panels where the pwm input is not active low,
so make it configurable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 5077111..af728b5 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -23,6 +23,14 @@
#include "hitachi_tx18d42vm_lcd.h"
#include "ssd2828.h"
+#ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW
+#define PWM_ON 0
+#define PWM_OFF 1
+#else
+#define PWM_ON 1
+#define PWM_OFF 0
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
enum sunxi_monitor {
@@ -598,8 +606,7 @@
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
if (pin != -1) {
gpio_request(pin, "lcd_backlight_pwm");
- /* backlight pwm is inverted, set to 1 to disable backlight */
- gpio_direction_output(pin, 1);
+ gpio_direction_output(pin, PWM_OFF);
}
/* Give the backlight some time to turn off and power up the panel. */
@@ -626,10 +633,8 @@
gpio_direction_output(pin, 1);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
- if (pin != -1) {
- /* backlight pwm is inverted, set to 0 to enable backlight */
- gpio_direction_output(pin, 0);
- }
+ if (pin != -1)
+ gpio_direction_output(pin, PWM_ON);
}
static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode)