diff --git a/arch/x86/lib/fsp/Makefile b/arch/x86/lib/fsp/Makefile
index 1b9b0e2..3a2bac0 100644
--- a/arch/x86/lib/fsp/Makefile
+++ b/arch/x86/lib/fsp/Makefile
@@ -4,4 +4,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+obj-y += fsp_car.o
+obj-y += fsp_dram.o
 obj-y += fsp_support.o
diff --git a/arch/x86/lib/fsp/fsp_car.S b/arch/x86/lib/fsp/fsp_car.S
new file mode 100644
index 0000000..5e09568
--- /dev/null
+++ b/arch/x86/lib/fsp/fsp_car.S
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/post.h>
+
+.globl car_init
+car_init:
+	/*
+	 * Note: ebp holds the BIST value (built-in self test) so far, but ebp
+	 * will be destroyed through the FSP call, thus we have to test the
+	 * BIST value here before we call into FSP.
+	 */
+	test	%ebp, %ebp
+	jz	car_init_start
+	post_code(POST_BIST_FAILURE)
+	jmp	die
+
+car_init_start:
+	post_code(POST_CAR_START)
+	lea	find_fsp_header_romstack, %esp
+	jmp	find_fsp_header
+
+find_fsp_header_ret:
+	/* EAX points to FSP_INFO_HEADER */
+	mov	%eax, %ebp
+
+	/* sanity test */
+	cmp	$CONFIG_FSP_ADDR, %eax
+	jb	die
+
+	/* calculate TempRamInitEntry address */
+	mov	0x30(%ebp), %eax
+	add	0x1c(%ebp), %eax
+
+	/* call FSP TempRamInitEntry to setup temporary stack */
+	lea	temp_ram_init_romstack, %esp
+	jmp	*%eax
+
+temp_ram_init_ret:
+	addl	$4, %esp
+	cmp	$0, %eax
+	jnz	car_init_fail
+
+	post_code(POST_CAR_CPU_CACHE)
+
+	/*
+	 * The FSP TempRamInit initializes the ecx and edx registers to
+	 * point to a temporary but writable memory range (Cache-As-RAM).
+	 * ecx: the start of this temporary memory range,
+	 * edx: the end of this range.
+	 */
+
+	/* stack grows down from top of CAR */
+	movl	%edx, %esp
+
+	/*
+	 * TODO:
+	 *
+	 * According to FSP architecture spec, the fsp_init() will not return
+	 * to its caller, instead it requires the bootloader to provide a
+	 * so-called continuation function to pass into the FSP as a parameter
+	 * of fsp_init, and fsp_init() will call that continuation function
+	 * directly.
+	 *
+	 * The call to fsp_init() may need to be moved out of the car_init()
+	 * to cpu_init_f() with the help of some inline assembly codes.
+	 * Note there is another issue that fsp_init() will setup another stack
+	 * using the fsp_init parameter stack_top after DRAM is initialized,
+	 * which means any data on the previous stack (on the CAR) gets lost
+	 * (ie: U-Boot global_data). FSP is supposed to support such scenario,
+	 * however it does not work. This should be revisited in the future.
+	 */
+	movl	$CONFIG_FSP_TEMP_RAM_ADDR, %eax
+	xorl	%edx, %edx
+	xorl	%ecx, %ecx
+	call	fsp_init
+
+.global fsp_init_done
+fsp_init_done:
+	/*
+	 * We come here from FspInit with eax pointing to the HOB list.
+	 * Save eax to esi temporarily.
+	 */
+	movl	%eax, %esi
+	/*
+	 * Re-initialize the ebp (BIST) to zero, as we already reach here
+	 * which means we passed BIST testing before.
+	 */
+	xorl	%ebp, %ebp
+	jmp	car_init_ret
+
+car_init_fail:
+	post_code(POST_CAR_FAILURE)
+
+die:
+	hlt
+	jmp	die
+	hlt
+
+	/*
+	 * The function call before CAR initialization is tricky. It cannot
+	 * be called using the 'call' instruction but only the 'jmp' with
+	 * the help of a handcrafted stack in the ROM. The stack needs to
+	 * contain the function return address as well as the parameters.
+	 */
+	.balign	4
+find_fsp_header_romstack:
+	.long	find_fsp_header_ret
+
+	.balign	4
+temp_ram_init_romstack:
+	.long	temp_ram_init_ret
+	.long	temp_ram_init_params
+temp_ram_init_params:
+_dt_ucode_base_size:
+	/* These next two fields are filled in by ifdtool */
+	.long	0			/* microcode base */
+	.long	0			/* microcode size */
+	.long	CONFIG_SYS_MONITOR_BASE	/* code region base */
+	.long	CONFIG_SYS_MONITOR_LEN	/* code region size */
diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c
new file mode 100644
index 0000000..4c0a7c8
--- /dev/null
+++ b/arch/x86/lib/fsp/fsp_dram.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/e820.h>
+#include <asm/post.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	phys_size_t ram_size = 0;
+	const struct hob_header *hdr;
+	struct hob_res_desc *res_desc;
+
+	hdr = gd->arch.hob_list;
+	while (!end_of_hob(hdr)) {
+		if (hdr->type == HOB_TYPE_RES_DESC) {
+			res_desc = (struct hob_res_desc *)hdr;
+			if (res_desc->type == RES_SYS_MEM ||
+			    res_desc->type == RES_MEM_RESERVED) {
+				ram_size += res_desc->len;
+			}
+		}
+		hdr = get_next_hob(hdr);
+	}
+
+	gd->ram_size = ram_size;
+	post_code(POST_DRAM);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = 0;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	return fsp_get_usable_lowmem_top(gd->arch.hob_list);
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+	unsigned num_entries = 0;
+	const struct hob_header *hdr;
+	struct hob_res_desc *res_desc;
+
+	hdr = gd->arch.hob_list;
+
+	while (!end_of_hob(hdr)) {
+		if (hdr->type == HOB_TYPE_RES_DESC) {
+			res_desc = (struct hob_res_desc *)hdr;
+			entries[num_entries].addr = res_desc->phys_start;
+			entries[num_entries].size = res_desc->len;
+
+			if (res_desc->type == RES_SYS_MEM)
+				entries[num_entries].type = E820_RAM;
+			else if (res_desc->type == RES_MEM_RESERVED)
+				entries[num_entries].type = E820_RESERVED;
+		}
+		hdr = get_next_hob(hdr);
+		num_entries++;
+	}
+
+	return num_entries;
+}