lpi2c: Add bus busy error handling
When doing "i2c dev 4; i2c probe" with ENET daughter card connected
on iMX8QXP MEK board, we met a i2c bus busy issue, that the BBF of
lpi2c always show busy, but the master is idle, and stop is detected
(SDF set).
This patch addes a handling to re-init the lpi2c master for this
case. Then the issue can be worked around.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/i2c/imx_lpi2c.c b/drivers/i2c/imx_lpi2c.c
index 585787a..ff07ca3 100644
--- a/drivers/i2c/imx_lpi2c.c
+++ b/drivers/i2c/imx_lpi2c.c
@@ -18,6 +18,8 @@
#define LPI2C_NACK_TOUT_MS 1
#define LPI2C_TIMEOUT_MS 100
+static int bus_i2c_init(struct udevice *bus, int speed);
+
/* Weak linked function for overridden by some SoC power function */
int __weak init_i2c_power(unsigned i2c_num)
{
@@ -91,8 +93,9 @@
return result;
}
-static int bus_i2c_send(struct imx_lpi2c_reg *regs, u8 *txbuf, int len)
+static int bus_i2c_send(struct udevice *bus, u8 *txbuf, int len)
{
+ struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
lpi2c_status_t result = LPI2C_SUCESS;
/* empty tx */
@@ -111,8 +114,9 @@
return result;
}
-static int bus_i2c_receive(struct imx_lpi2c_reg *regs, u8 *rxbuf, int len)
+static int bus_i2c_receive(struct udevice *bus, u8 *rxbuf, int len)
{
+ struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
lpi2c_status_t result = LPI2C_SUCESS;
u32 val;
ulong start_time = get_timer(0);
@@ -153,15 +157,24 @@
return result;
}
-static int bus_i2c_start(struct imx_lpi2c_reg *regs, u8 addr, u8 dir)
+static int bus_i2c_start(struct udevice *bus, u8 addr, u8 dir)
{
lpi2c_status_t result;
+ struct imx_lpi2c_reg *regs =
+ (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
u32 val;
result = imx_lpci2c_check_busy_bus(regs);
if (result) {
debug("i2c: start check busy bus: 0x%x\n", result);
- return result;
+
+ /* Try to init the lpi2c then check the bus busy again */
+ bus_i2c_init(bus, 100000);
+ result = imx_lpci2c_check_busy_bus(regs);
+ if (result) {
+ printf("i2c: Error check busy bus: 0x%x\n", result);
+ return result;
+ }
}
/* clear all status flags */
writel(0x7f00, ®s->msr);
@@ -181,9 +194,11 @@
return result;
}
-static int bus_i2c_stop(struct imx_lpi2c_reg *regs)
+static int bus_i2c_stop(struct udevice *bus)
{
lpi2c_status_t result;
+ struct imx_lpi2c_reg *regs =
+ (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
u32 status;
ulong start_time;
@@ -217,28 +232,28 @@
return result;
}
-static int bus_i2c_read(struct imx_lpi2c_reg *regs, u32 chip, u8 *buf, int len)
+static int bus_i2c_read(struct udevice *bus, u32 chip, u8 *buf, int len)
{
lpi2c_status_t result;
- result = bus_i2c_start(regs, chip, 1);
+ result = bus_i2c_start(bus, chip, 1);
if (result)
return result;
- result = bus_i2c_receive(regs, buf, len);
+ result = bus_i2c_receive(bus, buf, len);
if (result)
return result;
return result;
}
-static int bus_i2c_write(struct imx_lpi2c_reg *regs, u32 chip, u8 *buf, int len)
+static int bus_i2c_write(struct udevice *bus, u32 chip, u8 *buf, int len)
{
lpi2c_status_t result;
- result = bus_i2c_start(regs, chip, 0);
+ result = bus_i2c_start(bus, chip, 0);
if (result)
return result;
- result = bus_i2c_send(regs, buf, len);
+ result = bus_i2c_send(bus, buf, len);
if (result)
return result;
@@ -353,18 +368,16 @@
static int imx_lpi2c_probe_chip(struct udevice *bus, u32 chip,
u32 chip_flags)
{
- struct imx_lpi2c_reg *regs;
lpi2c_status_t result;
- regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
- result = bus_i2c_start(regs, chip, 0);
+ result = bus_i2c_start(bus, chip, 0);
if (result) {
- bus_i2c_stop(regs);
+ bus_i2c_stop(bus);
bus_i2c_init(bus, 100000);
return result;
}
- result = bus_i2c_stop(regs);
+ result = bus_i2c_stop(bus);
if (result)
bus_i2c_init(bus, 100000);
@@ -373,16 +386,14 @@
static int imx_lpi2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
{
- struct imx_lpi2c_reg *regs;
int ret = 0, ret_stop;
- regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
for (; nmsgs > 0; nmsgs--, msg++) {
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
if (msg->flags & I2C_M_RD)
- ret = bus_i2c_read(regs, msg->addr, msg->buf, msg->len);
+ ret = bus_i2c_read(bus, msg->addr, msg->buf, msg->len);
else {
- ret = bus_i2c_write(regs, msg->addr, msg->buf,
+ ret = bus_i2c_write(bus, msg->addr, msg->buf,
msg->len);
if (ret)
break;
@@ -392,7 +403,7 @@
if (ret)
debug("i2c_write: error sending\n");
- ret_stop = bus_i2c_stop(regs);
+ ret_stop = bus_i2c_stop(bus);
if (ret_stop)
debug("i2c_xfer: stop bus error\n");