Blackfin: update tiny board settings (voltage/default env)
The tinyboards like to run at a little lower voltage than the default, and
they prefer to boot over the network. For the latter, extend the common
code a little to make this easier.
Also fix the cm-bf527 env sector size while we're in here to reflect the
flash that is actually in use.
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 0fbd8f4..3fc0fa0 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -127,6 +127,9 @@
#ifndef CONFIG_BOOTARGS_ROOT
# define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
#endif
+#ifndef FLASHBOOT_ENV_SETTINGS
+# define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
+#endif
#define CONFIG_BOOTARGS \
"root=" CONFIG_BOOTARGS_ROOT " " \
"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
@@ -211,7 +214,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
NAND_ENV_SETTINGS \
NETWORK_ENV_SETTINGS \
- "flashboot=bootm 0x20100000\0"
+ FLASHBOOT_ENV_SETTINGS
/*
* Network Settings
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index 3d41bd1..ad1dd12 100644
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 4
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_120 | CLKBUFOE | FREQ_1000)
+
/*
* Memory Settings
@@ -105,7 +108,7 @@
#define CONFIG_ENV_ADDR 0x20008000
#define CONFIG_ENV_OFFSET 0x8000
#define CONFIG_ENV_SIZE 0x8000
-#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x8000
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
@@ -125,6 +128,10 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+ "flashboot=flread 20040000 1000000 300000;" \
+ "bootm 0x1000000\0"
/*
diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h
index 06eb288..7515296 100644
--- a/include/configs/cm-bf533.h
+++ b/include/configs/cm-bf533.h
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 5
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
/*
* Memory Settings
@@ -93,6 +96,8 @@
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
/*
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index b243e1a..0d68eba 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 4
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
+
/*
* Memory Settings
@@ -127,6 +130,10 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+ "flashboot=flread 20040000 1000000 300000;" \
+ "bootm 0x1000000\0"
/*
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index 0ed5960..c1179b0 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -131,6 +131,10 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+ "flashboot=flread 20040000 1000000 280000;" \
+ "bootm 0x1000000\0"
/*
@@ -138,13 +142,4 @@
*/
#include <configs/bfin_adi_common.h>
-#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run flashboot"
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- NAND_ENV_SETTINGS \
- NETWORK_ENV_SETTINGS \
- "flashboot=flread 20040000 1000000 280000; bootm 0x1000000\0"
-
#endif
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 9630f7d..93c4c8d 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 4
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
/*
* Memory Settings
@@ -115,6 +118,8 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
#ifndef __ADSPBF542__
/* Don't waste time transferring a logo over the UART */
diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h
index 4a77435..1741ed4 100644
--- a/include/configs/cm-bf561.h
+++ b/include/configs/cm-bf561.h
@@ -30,7 +30,7 @@
#define CONFIG_PLL_BYPASS 0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
/* Values can range from 0-63 (where 0 means 64) */
-#define CONFIG_VCO_MULT 22
+#define CONFIG_VCO_MULT 20
/* CCLK_DIV controls the core clock divider */
/* Values can be 1, 2, 4, or 8 ONLY */
#define CONFIG_CCLK_DIV 1
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 5
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
+
/*
* Memory Settings
@@ -98,6 +101,8 @@
*/
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
/*
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 9615ced..5a5fbdd 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -38,6 +38,9 @@
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 4
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
+
/*
* Memory Settings
@@ -128,6 +131,10 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BOOTCOMMAND "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+ "flashboot=flread 20040000 1000000 280000;" \
+ "bootm 0x1000000\0"
/*