| /* |
| * Copyright (c) 2016 Google, Inc |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <syscon.h> |
| #include <asm/cpu.h> |
| #include <asm/gpio.h> |
| #include <asm/intel_regs.h> |
| #include <asm/mrc_common.h> |
| #include <asm/pch_common.h> |
| #include <asm/post.h> |
| #include <asm/arch/me.h> |
| #include <asm/report_platform.h> |
| |
| static const char *const ecc_decoder[] = { |
| "inactive", |
| "active on IO", |
| "disabled on IO", |
| "active" |
| }; |
| |
| ulong mrc_common_board_get_usable_ram_top(ulong total_size) |
| { |
| struct memory_info *info = &gd->arch.meminfo; |
| uintptr_t dest_addr = 0; |
| struct memory_area *largest = NULL; |
| int i; |
| |
| /* Find largest area of memory below 4GB */ |
| |
| for (i = 0; i < info->num_areas; i++) { |
| struct memory_area *area = &info->area[i]; |
| |
| if (area->start >= 1ULL << 32) |
| continue; |
| if (!largest || area->size > largest->size) |
| largest = area; |
| } |
| |
| /* If no suitable area was found, return an error. */ |
| assert(largest); |
| if (!largest || largest->size < (2 << 20)) |
| panic("No available memory found for relocation"); |
| |
| dest_addr = largest->start + largest->size; |
| |
| return (ulong)dest_addr; |
| } |
| |
| void mrc_common_dram_init_banksize(void) |
| { |
| struct memory_info *info = &gd->arch.meminfo; |
| int num_banks; |
| int i; |
| |
| for (i = 0, num_banks = 0; i < info->num_areas; i++) { |
| struct memory_area *area = &info->area[i]; |
| |
| if (area->start >= 1ULL << 32) |
| continue; |
| gd->bd->bi_dram[num_banks].start = area->start; |
| gd->bd->bi_dram[num_banks].size = area->size; |
| num_banks++; |
| } |
| } |
| |
| int mrc_add_memory_area(struct memory_info *info, uint64_t start, |
| uint64_t end) |
| { |
| struct memory_area *ptr; |
| |
| if (info->num_areas == CONFIG_NR_DRAM_BANKS) |
| return -ENOSPC; |
| |
| ptr = &info->area[info->num_areas]; |
| ptr->start = start; |
| ptr->size = end - start; |
| info->total_memory += ptr->size; |
| if (ptr->start < (1ULL << 32)) |
| info->total_32bit_memory += ptr->size; |
| debug("%d: memory %llx size %llx, total now %llx / %llx\n", |
| info->num_areas, ptr->start, ptr->size, |
| info->total_32bit_memory, info->total_memory); |
| info->num_areas++; |
| |
| return 0; |
| } |
| |
| /* |
| * Dump in the log memory controller configuration as read from the memory |
| * controller registers. |
| */ |
| void report_memory_config(void) |
| { |
| u32 addr_decoder_common, addr_decode_ch[2]; |
| int i; |
| |
| addr_decoder_common = readl(MCHBAR_REG(0x5000)); |
| addr_decode_ch[0] = readl(MCHBAR_REG(0x5004)); |
| addr_decode_ch[1] = readl(MCHBAR_REG(0x5008)); |
| |
| debug("memcfg DDR3 clock %d MHz\n", |
| (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100); |
| debug("memcfg channel assignment: A: %d, B % d, C % d\n", |
| addr_decoder_common & 3, |
| (addr_decoder_common >> 2) & 3, |
| (addr_decoder_common >> 4) & 3); |
| |
| for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { |
| u32 ch_conf = addr_decode_ch[i]; |
| debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf); |
| debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]); |
| debug(" enhanced interleave mode %s\n", |
| ((ch_conf >> 22) & 1) ? "on" : "off"); |
| debug(" rank interleave %s\n", |
| ((ch_conf >> 21) & 1) ? "on" : "off"); |
| debug(" DIMMA %d MB width x%d %s rank%s\n", |
| ((ch_conf >> 0) & 0xff) * 256, |
| ((ch_conf >> 19) & 1) ? 16 : 8, |
| ((ch_conf >> 17) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? "" : ", selected"); |
| debug(" DIMMB %d MB width x%d %s rank%s\n", |
| ((ch_conf >> 8) & 0xff) * 256, |
| ((ch_conf >> 20) & 1) ? 16 : 8, |
| ((ch_conf >> 18) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? ", selected" : ""); |
| } |
| } |
| |
| int mrc_locate_spd(struct udevice *dev, int size, const void **spd_datap) |
| { |
| const void *blob = gd->fdt_blob; |
| int spd_index; |
| struct gpio_desc desc[4]; |
| int spd_node; |
| int node; |
| int ret; |
| |
| ret = gpio_request_list_by_name(dev, "board-id-gpios", desc, |
| ARRAY_SIZE(desc), GPIOD_IS_IN); |
| if (ret < 0) { |
| debug("%s: gpio ret=%d\n", __func__, ret); |
| return ret; |
| } |
| spd_index = dm_gpio_get_values_as_int(desc, ret); |
| debug("spd index %d\n", spd_index); |
| |
| node = fdt_first_subnode(blob, dev_of_offset(dev)); |
| if (node < 0) |
| return -EINVAL; |
| for (spd_node = fdt_first_subnode(blob, node); |
| spd_node > 0; |
| spd_node = fdt_next_subnode(blob, spd_node)) { |
| int len; |
| |
| if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index) |
| continue; |
| *spd_datap = fdt_getprop(blob, spd_node, "data", &len); |
| if (len < size) { |
| printf("Missing SPD data\n"); |
| return -EINVAL; |
| } |
| |
| debug("Using SDRAM SPD data for '%s'\n", |
| fdt_get_name(blob, spd_node, NULL)); |
| return 0; |
| } |
| |
| printf("No SPD data found for index %d\n", spd_index); |
| return -ENOENT; |
| } |
| |
| asmlinkage void sdram_console_tx_byte(unsigned char byte) |
| { |
| #ifdef DEBUG |
| putc(byte); |
| #endif |
| } |
| |
| /** |
| * Find the PEI executable in the ROM and execute it. |
| * |
| * @me_dev: Management Engine device |
| * @pei_data: configuration data for UEFI PEI reference code |
| */ |
| static int sdram_initialise(struct udevice *dev, struct udevice *me_dev, |
| void *pei_data, bool use_asm_linkage) |
| { |
| unsigned version; |
| const char *data; |
| |
| report_platform_info(dev); |
| debug("Starting UEFI PEI System Agent\n"); |
| |
| debug("PEI data at %p:\n", pei_data); |
| |
| data = (char *)CONFIG_X86_MRC_ADDR; |
| if (data) { |
| int rv; |
| ulong start; |
| |
| debug("Calling MRC at %p\n", data); |
| post_code(POST_PRE_MRC); |
| start = get_timer(0); |
| if (use_asm_linkage) { |
| asmlinkage int (*func)(void *); |
| |
| func = (asmlinkage int (*)(void *))data; |
| rv = func(pei_data); |
| } else { |
| int (*func)(void *); |
| |
| func = (int (*)(void *))data; |
| rv = func(pei_data); |
| } |
| post_code(POST_MRC); |
| if (rv) { |
| switch (rv) { |
| case -1: |
| printf("PEI version mismatch.\n"); |
| break; |
| case -2: |
| printf("Invalid memory frequency.\n"); |
| break; |
| default: |
| printf("MRC returned %x.\n", rv); |
| } |
| printf("Nonzero MRC return value.\n"); |
| return -EFAULT; |
| } |
| debug("MRC execution time %lu ms\n", get_timer(start)); |
| } else { |
| printf("UEFI PEI System Agent not found.\n"); |
| return -ENOSYS; |
| } |
| |
| version = readl(MCHBAR_REG(MCHBAR_PEI_VERSION)); |
| debug("System Agent Version %d.%d.%d Build %d\n", |
| version >> 24 , (version >> 16) & 0xff, |
| (version >> 8) & 0xff, version & 0xff); |
| |
| #if CONFIG_USBDEBUG |
| /* mrc.bin reconfigures USB, so reinit it to have debug */ |
| early_usbdebug_init(); |
| #endif |
| |
| return 0; |
| } |
| |
| int mrc_common_init(struct udevice *dev, void *pei_data, bool use_asm_linkage) |
| { |
| struct udevice *me_dev; |
| int ret; |
| |
| ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev); |
| if (ret) |
| return ret; |
| |
| ret = sdram_initialise(dev, me_dev, pei_data, use_asm_linkage); |
| if (ret) |
| return ret; |
| quick_ram_check(); |
| post_code(POST_DRAM); |
| report_memory_config(); |
| |
| return 0; |
| } |