arm64: zynqmp: Remove si5328 and si5382 nodes
There are no drivers for these devices that's why remove that nodes
completely. This change is done based on Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 1b08ac0..44e1b28 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -605,15 +605,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator@69 {/* SI5328 - u20 */
- compatible = "silabs,si5328";
- reg = <0x69>;
- /*
- * Chip has interrupt present connected to PL
- * interrupt-parent = <&>;
- * interrupts = <>;
- */
- };
+ /* SI5328 - u20 */
};
/* 5 - 7 unconnected */
};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index f368309..596251e 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -166,10 +166,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
- compatible = "idt,8t49n287";
- reg = <0x6c>;
- };
+ /* 8T49N287 - u182 */
};
i2c@2 {
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 9b81647..6045b56 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -190,10 +190,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
- compatible = "idt,8t49n287";
- reg = <0x6c>;
- };
+ /* 8T49N287 - u182 */
};
i2c@2 {
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 25076f4..86ab94f 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -595,25 +595,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5328: clock-generator@69 {/* SI5328 - u20 */
- reg = <0x69>;
- /*
- * Chip has interrupt present connected to PL
- * interrupt-parent = <&>;
- * interrupts = <>;
- */
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <1>;
- clocks = <&refhdmi>;
- clock-names = "xtal";
- clock-output-names = "si5328";
-
- si5328_clk: clk0@0 {
- reg = <0>;
- clock-frequency = <27000000>;
- };
- };
+ /* SI5328 - u20 */
};
i2c@5 {
#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 9848824..84eb899 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -481,10 +481,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- si5382: clock-generator@69 { /* SI5382 - u48 */
- compatible = "silabs,si5382";
- reg = <0x69>;
- };
+ /* SI5382 - u48 */
};
i2c@5 {
#address-cells = <1>;